I'm performing an installation from CD-ROM on a Compaq Deskpro 4000
with a CreativeLabs 8x IDE CD-ROM.
During dselect, the machine comes to a crawl (including the other
virtual consoles), almost unusable, and the instalation of each packages
takes minutes. The console is filled by many, many lines of these
messages:
hdb: ATAPI reset complete
hdb: irq timeout: status=0x58
hdb is probably /dev/hdb, which is my CD-ROM drive (the second
device on the first IDE controller.
I installed the CD modules in the kernel without specifying any
parameters.
Can someone give me a hint at what to do? I already looked at the
archives but found nothing...
Leandro Guimarães Faria Corcete Dutra [EMAIL PROTECTED]
Assistente de Informática http://www.lge.com.br./
LG Electronics da Amazônia Ltda fone +55 11 820 25 99 r 151
R do Rocio, 430 - 1º andar - Vila Olímpia fax +55 11 829 54 57
04552-906 - São Paulo, SP Soli Deo Gloria!
BRASIL
BEGIN:VCARD
VERSION:2.1
N:Dutra;Leandro;GFC
FN:Leandro GFC Dutra
ORG:LG Electronics da Amazônia Ltda;Sistemas de Informação
TITLE:Assistente de Informática
NOTE:Soli Deo Gloria!
TEL;WORK;VOICE:(011) 820 25 99
TEL;HOME;VOICE:(011) 247 42 85
TEL;WORK;FAX:(011) 829 54 57
ADR;WORK;ENCODING=QUOTED-PRINTABLE:;;R do Rocio, 430 - 1o. andar=0D=0AVila Ol=EDmpia;S=E3o Paulo;SP;04552-906;B=
rasil
LABEL;WORK;ENCODING=QUOTED-PRINTABLE:R do Rocio, 430 - 1o. andar=0D=0AVila Ol=EDmpia=0D=0AS=E3o Paulo, SP 04552-9=
06=0D=0ABrasil
ADR;HOME;ENCODING=QUOTED-PRINTABLE:;;Av Sgto Geraldo Santana, 1.100 - bl. 6, ap. 71=0D=0ACampo Grande;S=E3o Pau=
lo;SP;04552-906;Brasil
LABEL;HOME;ENCODING=QUOTED-PRINTABLE:Av Sgto Geraldo Santana, 1.100 - bl. 6, ap. 71=0D=0ACampo Grande=0D=0AS=E3o =
Paulo, SP 04552-906=0D=0ABrasil
URL:http://www.terravista.pt./Enseada/1989/
URL:http://www.lge.com.br./
EMAIL;PREF;INTERNET:[EMAIL PROTECTED]
REV:19980304T181310Z
END:VCARD
