You're getting close. It appears that you have customized your kernel and now you need to downlod the pcmcia-source package and recompile it too. You are probably trying to load pcmcia modules that were built to be compatible with the stock kernel image. Follow the directions in /usr/src/modules/pcmcia-cs/debian/README and I recommend the make-kpkg approach.
--Bob Damon Muller wrote: > > Hi Folks, > > If anyone read my earlier message, I have resolved my problem of how to get > the PCMCIA stuff onto a laptop without a CD-ROM or anything like that (just > coppied them off my windoze machine onto a floppy and mounted it as vfat on > debian). > > Now I'm wondering if anyone has had any luck with getting a D-Link DE-660 > PCMCIA ethernet card running under linux? This card is not on the supported > list, but I believe it is an update of the DE-650, which is on the > supported list. > > Anyway, I did RTFM (the PCMCIA-HOWTO), and followed the instructions, > attempting to get it to run the same module as the 650 (pcnet_cs). This > didn't work. > > After pottering around for a while, I eventual found my way to the > daemon.log, in which the PCMCIA stuff is logged. This is included below, > and to my (novice) eyes, it doesn't look very promising! > > BTW, I'm using Debian 1.3.1 (kernel 2.0.29), the PCMCIA-CS that was on the > same CD and pcmcia-modules-2.0.29-7_2.9.6-3.deb. > > Any help would be muchly apreciated! > > damon > > Mar 3 08:28:33 annapuna cardmgr[96]: initializing socket 0 > Mar 3 08:28:33 annapuna cardmgr[96]: socket 0: D-Link DE-660 Ethernet Card > Mar 3 08:28:33 annapuna cardmgr[96]: executing: 'insmod > /lib/modules/2.0.29/pcmcia/8390.o' > Mar 3 08:28:34 annapuna cardmgr[96]: + /lib/modules/2.0.29/pcmcia/8390.o: > unresolved symbol dev_alloc_skb_Re1879ac7 > Mar 3 08:28:34 annapuna cardmgr[96]: + /lib/modules/2.0.29/pcmcia/8390.o: > unresolved symbol ether_setup_R49e2786a > Mar 3 08:28:34 annapuna cardmgr[96]: + /lib/modules/2.0.29/pcmcia/8390.o: > unresolved symbol eth_type_trans_R5d6ef009 > Mar 3 08:28:34 annapuna cardmgr[96]: + /lib/modules/2.0.29/pcmcia/8390.o: > unresolved symbol netif_rx_R4c16cac7 > Mar 3 08:28:34 annapuna cardmgr[96]: + /lib/modules/2.0.29/pcmcia/8390.o: > unresolved symbol dev_kfree_skb_R7154554e > Mar 3 08:28:34 annapuna cardmgr[96]: + /lib/modules/2.0.29/pcmcia/8390.o: > unresolved symbol dev_tint_R3dd5ae2a > Mar 3 08:28:34 annapuna cardmgr[96]: insmod exited with status 1 > Mar 3 08:28:34 annapuna cardmgr[96]: executing: 'insmod > /lib/modules/2.0.29/pcmcia/pcnet_cs.o' > Mar 3 08:28:34 annapuna cardmgr[96]: + > /lib/modules/2.0.29/pcmcia/pcnet_cs.o: unresolved symbol ei_open > Mar 3 08:28:34 annapuna cardmgr[96]: + > /lib/modules/2.0.29/pcmcia/pcnet_cs.o: unresolved symbol ethdev_init > Mar 3 08:28:34 annapuna cardmgr[96]: + > /lib/modules/2.0.29/pcmcia/pcnet_cs.o: unresolved symbol ei_debug > Mar 3 08:28:34 annapuna cardmgr[96]: + > /lib/modules/2.0.29/pcmcia/pcnet_cs.o: unresolved symbol > unregister_netdev_R8ca4afc9 > Mar 3 08:28:34 annapuna cardmgr[96]: + > /lib/modules/2.0.29/pcmcia/pcnet_cs.o: unresolved symbol ei_interrupt > Mar 3 08:28:34 annapuna cardmgr[96]: + > /lib/modules/2.0.29/pcmcia/pcnet_cs.o: unresolved symbol NS8390_init > Mar 3 08:28:34 annapuna cardmgr[96]: + > /lib/modules/2.0.29/pcmcia/pcnet_cs.o: unresolved symbol > register_netdev_R1a0543c6 > Mar 3 08:28:34 annapuna cardmgr[96]: insmod exited with status 1 > Mar 3 08:28:34 annapuna cardmgr[96]: bind 'pcnet_cs' to socket 0 failed: > No such device > > ======== > Damon Muller ([EMAIL PROTECTED]) > Web Page: www.sub.net.au/~tr It's not a sense of humor. It's > ICQ UIN: 2920281 a sense of irony disguised as one. > PGP Key ID: 0x232C09E1 - Bruce Sterling > > -- > TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to > [EMAIL PROTECTED] . > Trouble? e-mail to [EMAIL PROTECTED] . -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
