Neither my coworker nor I have been able to find the time to try to attack the new problem - and I really don't know where to begin at the moment.
We got a system installed using the LS120 drive and the hamm installation disks (and I am will write up a little HOWTO to describe it - since it was not entirely obvious to me). Since I have no experience with NT bootloader, I decided that we should make a boot floppy. However, after we did the "reboot the computer step," the floppy would get the 'Loading..........' and then reboot the machine. I remember this behavior described on this list, but have not had a chance to go through the lists archives yet... Thanks for any assistance, Paul Rightley On 02-Mar-98 Ben Pfaff wrote: > Thank you for your suggestion. I managed to get the installation > to go (the kernel in the hamm boot floppies recognized the LS120 > as /dev/hdc). It took a bit of work (and we are now having another > tough problem), but it did work... > > Is this other problem something that I could help you with? Sometimes > these apparently difficult problems are simple if you know what's > going on. -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
