i still can't get my Xserver to allow me to change resolutions. it
accepts the first available ModeLine in XF86Setup and rejects the
rest with:
(**) P9000: Mode "1024x768": mode clock = 75.000
(**) P9000: Mode "1280x1024": mode clock = 108.000
(--) P9000: The dimensions of mode 1280x1024 do not match those of
the first valid mode (1024x768).
(--) P9000: Removing mode "1280x1024" from list of valid modes.
(--) P9000: Virtual resolution set to 1024x768
i don't have a clue what 'dimension' it is talking about.
from /etc/X11/X11Config:
# The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32,
Mach64)
Section "Screen"
Driver "accel"
Device "Diamond Viper VLB 2Mb"
Monitor "Nanao flexscan"
Subsection "Display"
Depth 8
Modes "640x480" "800x600" "800x601" "1024x768" "1280x1024"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "640x480" "800x600" "1024x768"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "640x480" "800x600"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "640x480" "800x600"
ViewPort 0 0
EndSubsection
EndSection
and earlier:
# 640x480
#ModeLine "640x480" 31 640 664 704 832 480 489 492 520
# 800x600
#ModeLine "800x600" 45 800 856 976 1040 600 637 643 666
# another 800x600
#ModeLine "800x601" 50 800 856 976 1040 600 637 643 666
# 1024x768
ModeLine "1024x768" 75 1024 1048 1184 1328 768 771 777 806
# 1280x1024
ModeLine "1280x1024" 108 1280 1307 1483 1664 1024 1032 1040 1068
any one of these will work...
i can't discern anything wrong.
i'd appreciate any insight.
-=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=- -=+=-
Dave Mallery, K5EN
po box 520; ramah nm 87321
running Debian GNU/Linux....."Free at last!!!!"
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
