I tried what you suggested but it just hangs when trying to load the module. Any other suggestions?
Hamish Moffatt wrote: > On Sun, Dec 21, 1997 at 12:20:34AM -0500, Aaron Walker wrote: > > Has anyone successfully setup a NE1000 card (not a clone) using Debian > > 1.3.1 with the loadable kernel module. I can't get my 486SX/25 with 8MB > > RAM to detect my NE1000 card. I can only use loadable modules because > > there's no way for me to get the newest kernel to my 486 (no modem, no > > zip drive, etc.) If anyone has successfully done this, I would > > appreciate your help. Thanks very much. > > The ne module handles both NE2000 and NE1000 cards. Just add > ne to your /etc/modules, and something like > > options ne io=0x280 irq=10 > > to /etc/conf.modules. > > An original NE1000 might need a shared memory address too, > but I can't tell you how to set that up because I've never needed to. > Try it and see though. > > Hamish > -- > Hamish Moffatt, [EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED] > Latest Debian packages at ftp://ftp.rising.com.au/pub/hamish. PGP#EFA6B9D5 > CCs of replies from mailing lists are welcome. http://hamish.home.ml.org > > -- > TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to > [EMAIL PROTECTED] . > Trouble? e-mail to [EMAIL PROTECTED] . -- ````````````````````````````````````````````````````````````````````````` Aaron Walker Work: Site: http://www.iconmedia.com Email: [EMAIL PROTECTED] Personal: Site: http://www.iconmedia.com/aaron Email: [EMAIL PROTECTED] `````````````````````````````````````````````````````````````````````````` -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
