I have a couple of SCSI drives I am trying to get up and running - one is a Seagate ST32107WC. It has a SCA connector on it, so I bought a little adapter thingie to convert it to 50-pin. On boot up (under Linux) the PC self test sees it, in the early stages of boot the Adaptec identifies it correctly, but when the Linux kernel boots, it identifies it as a Conner something-or-other (not surprising) and gives it the number 82h. For some reason I cannot then see it when the OS is running. Looking at dmesg doesn't show any 'sd' devices. Do you have any ideas how I can fix this?
I know you can use fdisk and specify the disk geometry if the disk is 0x80 or 0x81, but what about when it comes up 0x82? Thanks! -- Ken Gaugler N6OSK Santa Clara, California email: [EMAIL PROTECTED] URL: http://www.wco.com/~keng "The life of a Repo Man is always INTENSE..." -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
