At 04:51 PM 12/05/02 +1100, David Cureton wrote: >I had this problem also, never really put my finger on what was causing it, >however I have a feeling that is was due to the NTP server being a different >NTP version.
>Running ntpdc utility: > entering in the 'sysstats' command and observing the 'old version packets' >'new version packets' fields Interesting. ntp-simple doesn't have ntpdc, unfortunately, so I can't check without installing ntp. >Anyway to cut a long story short i changes the NTP server I was syncing to >and the problem went away. Darn. I have the same ntp servers listed on my laptop and another desktop and they are accurate. I'm not blocking port 123 -- all outgoing connections are allowed on this machine. Hum, looking at my laptop now I see nptd writing to syslog often, yet on the other machine it's not writing to syslog. But ntp is running. Let's try another restart. Both my laptop and this other "time delayed" machine are running same version of ntpd, same exact config file. I just restared both and see the exact same startup sequence in syslog. Dec 4 21:42:29 burn ntpd[1109]: ntpd exiting on signal 15 Dec 4 21:42:31 burn ntpd[12291]: ntpd 4.1.0 Mon Mar 25 23:39:47 UTC 2002 (2) Dec 4 21:42:31 burn ntpd[12291]: signal_no_reset: signal 13 had flags 4000000 Dec 4 21:42:31 burn ntpd[12291]: precision = 7 usec Dec 4 21:42:31 burn ntpd[12291]: kernel time discipline status 0040 Dec 4 21:42:31 burn ntpd[12291]: frequency initialized 12.294 from /var/lib/ntp/ntp.drift Dec 4 21:42:31 burn ntpd[12292]: signal_no_reset: signal 17 had flags 4000000 Oh! and a few minutes later: Dec 4 21:46:00 burn ntpd[12291]: time correction of 1625 seconds exceeds sanity limit (1000); set clock manually to the correct UTC time. Well, that explains why ntp is not updating. But it doesn't explain why it's getting behind in the first place. I'll run ntpdate again and watch more closely. I ran /etc/init.d/ntpdate restart and that reset the system clock that was about 25 minutes behind. I ran hwclock --show and that showed it was *ahead* of current time by a few minutes. I ran hwclock --systohc to update that and restarted ntp. Now, as they say, time will tell. Thanks for all the responses! -- Bill Moseley mailto:[EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
