you need to choose the: Adaptec AHA152X/2825 support
...option when you are configuring your kernel. this will work for the 1505 (which i have) and the 1510. then you have to add an 'append' line to /etc/lilo.conf. here's mine: $ cat /etc/lilo.conf boot=/dev/hda root=/dev/hda2 compact install=/boot/boot.b map=/boot/map vga=normal delay=20 image=/vmlinuz.dev label=Linux read-only append="aha152x=0x340,10,7,1" other=/dev/hda1 label=win image=/vmlinuz label=linux.old read-only append="aha152x=0x340,10,7,1" ...you may have to change the first two values after the '=' for the memory address and irq of your card, but the last two should be the same. don't forget to run lilo as root after you've configured and made your changes to /etc/lilo.conf. :) hope this helps, matty > The Hardware Compatibility HOWTO says that this SCSI card is supported > under Debian Linux 1.3.1, but it didn't come with my standard distribution. > Where can I get the module or driver for the AHA-1510 device? > > > -- > TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to > [EMAIL PROTECTED] . > Trouble? e-mail to [EMAIL PROTECTED] . > > Matt Thompson [EMAIL PROTECTED] MZI, Inc. v-206.430.3726 707 S. Grady Way f-206.430.3420 Renton, WA 98055 [EMAIL PROTECTED] -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
