Oops.  On second thoughts i have not given you a good answer at all.  I
see I have the same problem with the cd-rom on a 6000.  Making the device
seems to do the trick. 

-- Jaldhar

On Mon, 27 Oct 1997, Jaldhar H. Vyas wrote:

> 
> Try this URL: http://www-c724.uibk.ac.at/XL/
> 
> It should tell you all you need to know.
> 
> -- 
> Jaldhar H. Vyas <[EMAIL PROTECTED]>
> 
> On Mon, 27 Oct 1997, Sudhakar Chandrasekharan wrote:
> 
> > When I boot up -
> > 
> > kernel: FDC 0 is a National Semiconductor PC87306
> > kernel: scsi0 : AM53/79C974 PCscsi driver rev. 0.5; host I/O address:
> > 0x7100; irq: 11
> > kernel:
> > kernel: scsi : 1 host.
> > kernel:   Vendor: COMPAQPC  Model: ST32430N          Rev: 0554
> > kernel:   Type:   Direct-Access                      ANSI SCSI revision:
> > 02
> > kernel: Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
> > kernel:                                  
> > kernel: target 1: rate=10.0 Mhz, synchronous, sync offset=15 bytes
> > kernel:   Vendor: COMPAQ    Model: ST32550N          Rev: 6316
> > kernel:   Type:   Direct-Access                      ANSI SCSI revision:
> > 02
> > kernel: Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
> > kernel:   Vendor: COMPAQ    Model: PD-1 LF-1094C     Rev: B110
> > kernel:   Type:   CD-ROM                             ANSI SCSI revision:
> > 02
> > kernel: Detected scsi CD-ROM sr0 at scsi0, channel 0, id 5, lun 0
> > kernel: scsi : detected 1 SCSI cdrom 2 SCSI disks total.
> > kernel: SCSI device sda: hdwr sector= 512 bytes. Sectors= 4110000 [2006
> > MB] [2.0 GB]
> > kernel: SCSI device sdb: hdwr sector= 512 bytes. Sectors= 4110000 [2006
> > MB] [2.0 GB]
> > 
> > 
> > If I read these messages correctly, my CDROM should be /dev/sr0
> > 
> > I pop-in a CD and do the following -
> > 
> > # mount -t umsdos /dev/sr0 /cdrom
> > mount: the kernel does not recogonize /dev/sr0 as a block device
> >     (maybe `insmod driver'?)
> > 
> > # mount -t iso9660 /dev/sr0 /cdrom
> > mount: the kernel does not recogonize /dev/sr0 as a block device
> >     (maybe `insmod driver'?)
> > 
> > 
> > My kernel has umsdos, iso9660, SCSI CD-ROM support compiled in.
> > 
> > # ls -l /dev/sr0
> > brw-r--r--   1 root     root      22,   0 Jul 24 17:46 /dev/sr0
> > 
> > 
> > 
> > My machine is a Compaq DeskPro XL 6200.
> > 
> > How could I get my CD-ROM to work?
> > 
> > Also, has anybody got the MSS Sound to work on a Compaq DeskPro XL?
> > 
> > Thaths
> > -- 
> >      "Expiry date June Nineteen Eighty Nin-Two Thousand Twelve."
> >                       -- Homer J Simpson
> > Sudhakar C13n                                       (650) 937-2354 (O)
> > International Websites Engineer                     (415) 940-1896 (H)
> >                  http://people.netscape.com/thaths/
> > 
> > 
> > --
> > TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
> > [EMAIL PROTECTED] . 
> > Trouble?  e-mail to [EMAIL PROTECTED] .
> > 
> 
> 
> --
> TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
> [EMAIL PROTECTED] . 
> Trouble?  e-mail to [EMAIL PROTECTED] .
> 


--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] . 
Trouble?  e-mail to [EMAIL PROTECTED] .

Reply via email to