Hi there, I'm trying to get my ISDN working. I already have my card recognized in Linux, also the ISDN utilities are working. So no I want to dial in to my provider.
I checked some URL's for help on ISDN4linux: http://www.lrz-muenchen.de/~ui16lab/www/isdn/setup_e.htm http://www.wurtel.demon.nl/i4l-howto-nl.html So I did excactly what was in there: - I configured the kernal whith the following options: Code maturity level options: Prompt for development and/or incomplete code/drivers: No Section General Setup: Networking support: Yes Networking Options: TCP/IP Networking: Yes Network device support: Yes PPP support: Yes ISDN Subsystem: ISDN support: Yes Support synchronous PPP: Yes Use VJ compression with synchronous PPP: Yes Support audio via ISDN: Yes Support generic MP (RFC 1717): Yes And I selected my Teles card for support. - I used the following script for ISDN start-up: PHONE=0206241968 MYPHONE=6451085 MY_EAZ=6451085 HUPTIMEOUT=90 #read MY_HOSTNAME </etc/hostname MY_HOSTNAME=zeus IP_ADDRESS=194.178.56.21 OPTIONS_FILE=/etc/ppp/options /sbin/isdnctrl verbose 0 /sbin/isdnctrl addif ippp0 /sbin/isdnctrl pppbind ippp0 0 /sbin/isdnctrl addphone ippp0 out $PHONE /sbin/isdnctrl addphone ippp0 in $MYPHONE /sbin/isdnctrl eaz ippp0 $MY_EAZ /sbin/isdnctrl huptimeout ippp0 $HUPTIMEOUT /sbin/isdnctrl secure ippp0 on /sbin/isdnctrl l2_prot ippp0 hdlc /sbin/isdnctrl l3_prot ippp0 trans /sbin/isdnctrl encap ippp0 syncppp /sbin/ifconfig ippp0 $MY_HOSTNAME pointopoint $IP_ADDRESS metric 1 /sbin/route add default ippp0 /sbin/ipppd /dev/ippp0 file $OPTIONS_FILE & /sbin/route del default ifconfig ippp0 down - I use the following script to dialin: case $1 in on) /sbin/isdnctrl dial ippp0 sleep 5 route add default ippp0 ;; off) /sbin/isdnctrl hangup ippp0 route del default ;; *) echo -e "\a Usage: 'isdn on' or 'isdn off'" ;; esac - When I dial in, the syslog generates the following output: Aug 6 14:27:31 zeus login: ROOT LOGIN ON tty1 Aug 6 14:27:38 zeus kernel: isdn: Verbose-Level is 0 Aug 6 14:27:38 zeus syslog: Found 1 devices: /dev/ippp0, Aug 6 14:27:38 zeus pppd[381]: pppd 2.2.0 started by root, uid 0 Aug 6 14:27:38 zeus pppd[381]: init_unit: 0 Aug 6 14:27:38 zeus pppd[381]: Connect[0]: /dev/ippp0, fd: 8 Aug 6 14:27:43 zeus kernel: ippp0: dialing 0 0206241968... Aug 6 14:27:45 zeus kernel: isdn_net: ippp0 connected Aug 6 14:27:45 zeus pppd[381]: PHASE_WAIT -> PHASE_ESTABLISHED, ifunit: 0, linkunit: 0, fd: 8 Aug 6 14:27:46 zeus kernel: hscx_empty_fifo: incoming packet too large Aug 6 14:27:48 zeus last message repeated 481 times Aug 6 14:27:48 zeus kernel: ippp0: remote hangup Aug 6 14:27:48 zeus kernel: ippp0: Chargesum is 0 Aug 6 14:27:48 zeus pppd[381]: Modem hangup Aug 6 14:27:48 zeus pppd[381]: Connection terminated. Aug 6 14:27:48 zeus pppd[381]: taking down PHASE_DEAD link 0, linkunit: 0 Aug 6 14:27:48 zeus pppd[381]: link 0 closed , linkunit: 0 Aug 6 14:27:48 zeus pppd[381]: reinit_unit: 0 Aug 6 14:27:48 zeus pppd[381]: Connect[0]: /dev/ippp0, fd: 8 The hscx_empty_fifo messages are repeated very much, what is this and what can I do about it. - I think maybe my chap-secrets-file is not configured right or the options for ippd are nog configured right, who can give me some examples ?! And who knows the answer to my problem. - Anyway ISDN IS working under Windows NT with the same configuration of the IRQ (9) and port settings (0xd80h) and protocol EDSS1 Thanks in advance, Tom de Grunt The Netherlands Please mail me: [EMAIL PROTECTED] -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
