On 13 Aug 1997, Eloy A. Paris wrote: > You should see something like this (the host adapeter should be > seen even with no SCSI devices attached to it): [ snip of big output ]
> so your dmesg output definitely shows that your kernel is not seeing > your card. I thought the card was counted as a node on the scsi chain. > Is your kernel compiled with support for your SCSI card or the right > module has been loaded? Also, I have an AHA-1510 that requires boot > parameters (IRQ and I/O addr.) to be passed to the kernel because the card > does not even have a ROM that allows the kernel to auto-detect it. > This might be your problem... Bingo, I need to take my own advice and read the how-to's more often. Tryed adding the append stuff to lilo from the howto, rebooted, and everything worked perfectly. Now I just have to see how long fed ex takes to deliver a cable from across the country to see if the rest works :-) Thanks, Brandon ----- Brandon Mitchell E-mail: [EMAIL PROTECTED] Homepage: http://www.geocities.com/SiliconValley/7877/home.html "We all know Linux is great...it does infinite loops in 5 seconds." --Linus Torvalds -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
