> Yes I do have multiple ethernet cards on my machine... is there a place > where I can look up error messages?
/var/log/messages, etc. Have you looked at the Multiple Ethernet HOWTO? This will be a great place to start if you haven't. Other than the usual IRQ & I/O conflict suggestions and running any DOS-based NIC diagnostic software, I can't offer a lot of help with multiple NIC's because I've never had occasion to do it under Linux. Maybe someone else can offer more help. Later, Kevn Traas > On Wed, 21 May 1997, Kevin Traas wrote: > > > > When I plug an RJ45 cable into my NE2000 card I get the following error > > > over and over again until I remove the cable - "eth1: Command unit > > > stopped, status 4040, restarting." Has anyone else seen this, and were > > > you able to fix it? Scott. > > > > Do you have multiple ethernet cards in your machine? I'm no expert on > > this, but the first thing that caught my eye is the "eth1" device name. > > The first ethernet device is always "eth0" - AFAIK.... I can't provide any > > help on the rest of the message.... > > > > Do you have any way to test the NE2K card under <shudder> DOS? i.e. do you > > have any diagnostics software available? > > > > Send the output of "ifconfig". > > > > Later, > > > > Kevin Traas > > Systems Analyst > > Edmondson Roper CA > > http://www.eroper.bc.ca > > -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
