In your email to me, Peter Yarych, you wrote: > Hello all > I just installed Debian 1.1 today and it refuses to see my modem > during the boot-up process /dev/cuaX = no such device > I'm new to linux, but not that new... > I have been running RH for a few months. > I ran setserial /dev/cua1 and it returned the correct values > BTW, usr 33.6 pnp ( but jumpers r set to com2 or cua1) > under redhat I had no problems using it, for my ppp connection > I tried minicom out to see if I could get the modem to dial with no luck > I've spent about 3-4 hours looking in the doc's that I can find on the web > and as of yet had no luck. > I hope this isn't on the FAQ list.. or if it is plz send it to me :)
in /etc/modules, either uncomment the line #auto by removing the #, or add the line serial and reboot. This will add the serial module, and you should be all set. Tim -- (work) [EMAIL PROTECTED] / (home) [EMAIL PROTECTED] - http://www.buoy.com/~tps "I have abandonded my search for the Truth, and now am looking for a good fantasy..." Ashleigh Brilliant ** Disclaimer: My views/comments/beliefs, as strange as they are, are my own.**
