Thanks to help from the list I now have 16 bitplanes. However
now I cannot use the higher resolutions anymore. Is it really
not possible with 4 mb. Here is the xdm-errors:
XFree86 Version 3.2 / X Window System
(protocol Version 11, revision 0, vendor release 6100)
Release Date: Oct 26 1996
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux [ELF]
Configured drivers:
S3: accelerated server for S3 graphics adaptors (Patchlevel 0)
s3_ViRGE
(using VT number 7)
XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "dk"
(**) Mouse: type: MouseMan, device: /dev/mouse, baudrate: 9600
(**) S3: Graphics device ID: "Primary Card"
(**) S3: Monitor ID: "Primary Monitor"
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi"
(--) S3: PCI: ViRGE rev 6, Linear FB @ 0xf4000000
(--) S3: card type: PCI
(--) S3: chipset: ViRGE rev. 61
(**) S3: chipset driver: s3_virge
(--) S3: videoram: 4096k
(--) S3: Ramdac type: s3_trio64
(--) S3: Ramdac speed: 135
(--) S3: Using Trio32/64 programmable clock (MCLK 70.000 MHz)
(--) S3: Maximum allowed dot-clock: 80.000 MHz
(--) S3: Clock for mode "1280x1024" is too high for the configured hardware.
Limit is 80.000 MHz
(--) S3: Removing mode "1280x1024" from list of valid modes.
(--) S3: Clock for mode "1152x864" is too high for the configured hardware.
Limit is 80.000 MHz
(--) S3: Removing mode "1152x864" from list of valid modes.
(--) S3: Clock for mode "1024x768" is too high for the configured hardware.
Limit is 80.000 MHz
(--) S3: Removing mode "1024x768" from list of valid modes.
(**) S3: Mode "800x600": mode clock = 50.000
(**) S3: Mode "640x480": mode clock = 31.500
(**) S3: Mode "640x400": mode clock = 25.180
(**) S3: Mode "480x300": mode clock = 29.950
(**) S3: Mode "400x300": mode clock = 25.000
(**) S3: Mode "320x240": mode clock = 15.750
(**) S3: Mode "320x200": mode clock = 12.590
(**) S3: Using 16 bpp. Color weight: 565
etc.
I have tried to read the manual more than once !
Can anyone help
Michael
--
Associate professor Michael Gajhede, Department of Chemistry,
Universitetsparken 5, Copenhagen University, 2100 Copenhagen Denmark.
tlf 45-35320280, fax 45-35320299
internet: [EMAIL PROTECTED]
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
