> Message-Id: <[EMAIL PROTECTED]>
> Comments: Authenticated sender is <[EMAIL PROTECTED]>
> From: "Fingers" <[EMAIL PROTECTED]>
> Date: Tue, 17 Dec 1996 15:58:25 +0000
> Subject: Re: ifmail for debian
> Reply-To: [EMAIL PROTECTED]
> Resent-Message-Id: <"r_iGd3.0.qp4.r9ijo"@master.debian.org>
>
> > From: Hamish Moffatt <[EMAIL PROTECTED]>
> > Subject: ifmail for debian
> > To: debian-user@lists.debian.org (debian mailing list)
> > Date: Tue, 17 Dec 1996 19:47:19 +1100 (EST)
>
> > Anyone working on an ifmail package for Debian?
> > ifmail is a fidonet mailer for Unix.
>
> Not seen anything on the ftp site, i've tried to compile ifmail
> myself on my debian box but not had much luck :(
>
> Chris.
> Sysop of Logics BBS, Hereford, UK.
I'm running ifmail and FEddi on Debian 1.2 (kernel 2.0.27).
My CONFIG for ifmail looked like this:
...............................................................
/usr/src/uucp/ifmail/CONFIG
......................... snip! ...............................
# Compile-time configuration for ifmail FidoNet mailer and gateway
COPYRIGHT = "Eugene G. Crosser, 1993-1995"
VERSION = "2.8f"
# Main configuration file. This default may be overwritten by -I key.
CONFIGFILE = "/etc/ifmail/config"
# Debug messages turned on by -x key are written here.
DEBUGFILE = "/var/log/ifmail/ifdebug"
# Procession log. Usually gets several lines for each invocation.
LOGFILE = "/var/log/ifmail/iflog"
# Use syslog() facility codes for mail gate, news gate and ifcico.
MAILLOG = LOG_LOCAL0
NEWSLOG = LOG_LOCAL0
CICOLOG = LOG_LOCAL0
# Directory where UUCP lock files reside.
LOCKDIR = "/var/lock"
# Directory from which file requests are resolved.
PUBDIR = "/var/spool/uucppublic"
# News spool directory (to check space only)
NEWSSPOOL = "/var/spool/news"
# Compile-time system-dependant options.
# This was the original first line of the Linux OPTS:
# OPTS = -DHAS_STATFS -DSTATFS_IN_VFS_H -DHAS_SETSID -DHAS_NDBM_H \
# I had to compile without -DHAS_NDBM_H
# Linux:
OPTS = -DHAS_STATFS -DSTATFS_IN_VFS_H -DHAS_SETSID \
-DDONT_HAVE_TM_GMTOFF -DHAS_TERMIOS_H -DASCII_LOCKFILES \
-DHAS_FSYNC -DHAS_IOCTL_H -DHAS_REGEX_H -DHAS_TCP \
-DFORCEINTL -DHAS_SYSLOG -DNEED_UUCPFROM -DNEED_BSY \
-DREGEX_NEED_CARET -DNEED_TRAP -DSLAVE_SENDS_NAK_TOO \
-DNEED_FORK
# for make install, where to put binaries and what owner to set
BINDIR = /usr/local/bin/ifmail
OWNER = uucp
GROUP = uucp
MODE = 0711
SMODE = 4711
INSTALL = install
RANLIB = ranlib
SHELL = /bin/sh
ECHO = echo -e
CC = gcc
YACC = bison -y
LEX = flex
AWK = awk
TAR = tar
# Linux, 386BSD, SunOS:
CFLAGS = -O2 -Wall
LDFLAGS =
# Linux
LIBS = -lgdbm
INCLUDES = -I${INCDIR}
NEEDED =
......................... snip! ...............................
This is the primary config file (runtime) to get ifcico
to dial out:
/etc/ifmail/config:
......................... snip! ...............................
logfile /var/log/ifmail/iflog
debugfile /var/log/ifmail/ifdebug
verbose 12
inbound /var/spool/uucp/fnet/inbound
listinbound /var/spool/uucp/fnet/inbound
protinbound /var/spool/uucp/fnet/inbound
outbound /var/spool/uucp/fnet/outbound
public /var/spool/uucppublic
nodelist /var/spool/uucp/fnet/nodelist/nodelist.341
ModemPort cua0:L19200
PhoneTrans 1-860- /
#
# For Jerry Schwartz:
#
# ModemReset ATL3M1S11=50&Q6+MS=10,0,9600,9600\n\r
ModemReset ATL3M1S11=50&Q6+MS=10,0,9600,14400\n\r
#
#
# For Brian:
#
# ModemReset AT&C1&D2&K3L3M1S11=50%E3&Q5+MS=11,0,9600,26400\n\r
#
# For Dumb Modem:
# ModemReset AT&C1&D2&K3L3M1S11=50%E3&Q5+MS=10,0,2400,9600\n\r
#
#
ModemDial ATDT\T\n\r
ModemHangup ATH0\n\r
ModemOK OK
ModemConnect CONNECT
ModemError BUSY
ModemError NO\sANSWER
ModemError NO\sCARRIER
ModemError NO\sDIALTONE
ModemError RING\r
ModemError ERROR
TimeoutReset 3
TimeoutConnect 70
options (time Any) NoHold
Name Tingri
Location West Hartford CT
SysOp Christopher Hafey
Phone +860 236 5400
Speed 9600
Flags MO,XA,V32B,V42B,VFC,V34
address 1:142/[EMAIL PROTECTED]
password 1:142/103.0 *******
# the asterisks aren't really asterisks in the source; they're
# the session-level password. The reason you see them as
# asterisks is that I just typed over my real password.
......................... snip! ...............................
/etc/ifmail/Areas (totally lame in my case):
......................... snip! ...............................
# Conversion of areatags to newsgroups (with distribution) and back.
# AREA newsgroup distribution
142-928 local.142-928 local
BST local.bst local
CFORSALE local.cforsale local
CLASSIFIEDS local.classifieds local
COMPUSALE local.compusale local
CT_SINGLES local.ct_singles local
CT_USER local.ct_user local
FN_SYSOP local.fn_sysop local
FOR-SALE local.for-sale local
FUNNY local.funny local
LINUX local.linux local
NESYSOP local.nesysop local
OTHERNETS local.othernets local
SYSOP142 local.sysop142 local
* junk.* local
BAD.* *
......................... snip! ...............................
I'm not yet up to speed on inbound calls; I only use ifcico
to mail packets created in FEddi.
I generally reboot to dos 15 mins before ZMH, listen on the
port until my hub polls me, and then go back to Linux after
ZMH is over. I'd very much like to get the mgetty stuff
configured for ifcico; I just haven't had the time.
Christopher W. Hafey
-------------------------------------------------------------
[EMAIL PROTECTED] | 1078 New Britain Ave Apt 217
WA1TNR since 1974 | W Hartford Ct USA 06110-2434
http://www.ntplx.net/~tingri | tel. 860-236-5400
-------------------------------------------------------------
pgp: send msg w/subject: sendkey_me pgp
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
