On 14 Nov 1996 [EMAIL PROTECTED] wrote:
>
> A friend is trying to convert to Debian from Slakware. He's using
> buzz-fixed off an Info Magic cdrom, and can't get the installation
> boot disk to recognize his cdu31a.
>
> At the lilo prompt, he's type
> linux cdu31a=0x230,0
>
> This lilo parameter worked fine under slakware.
>
> Any suggestions?
>
This gave me the hardest time of installation too and i lost two days
being without a reasonably working system trying to find this out and
reinstalling numerous times until Bruce gave me the right advice:
Try:
modprobe cdu31a cdu31a_port=0x340 cdu31a_irq=5
If you use "modconf" (the module configuration menu) use the arguments
cdu31a_port=0x340 cdu31a_irq=5
Adapt as needed.
It's all stated in the kernel documentation included with the sources
which are not present upon the stage of the base system installation. And
the information *present* during installation time is somewhat misleading
because the old scheme of passing parameters to LILO doesn't work with the
new 2.0.xx kernels. This should be revised in the setup configuration. Or
is it already for "Debian-1.2" release?
P. *8^)
--
Paul Seelig [EMAIL PROTECTED]
African Music Archive - Institute for Ethnology and Africa Studies
Johannes Gutenberg-University - Forum 6 - 55099 Mainz/Germany
Our AMA Homepage in the WWW at http://www.uni-mainz.de/~bender/
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
