On Tue, 28 Jun 2005 15:06:12 +1200
Simon <[EMAIL PROTECTED]> wrote:
> Hi There,
>
> I have a debian sarge box with 2 network card as eth0 and eth1 (funny
> enough!).. eth0 is the default on one subnet (a single IP) and eth2 on
^^^^
Assuming 's/eth2/eth1'
>
> another (listening to multiple IPs).
>
> The problem is that i can ping eth0's IP, but not eth1's... but it
> shows up on the box as up and i can ping on the box itself...
>
> The cable works and is plugged in. :)
What is the chipset on eth1 and what driver are you using for it? (Not
saying that I have the answer, but you are more likely to get one if you
include that information.) You might also copy/paste the output of "cat
/proc/interrupts".
You may have a driver that a) is buggy b) doesn't fully support that
chipset or a faulty NIC. If you have done any troubleshooting to
eliminate any of those possibilities, that would also be helpful
information to include in your next e-mail.
HTH & HAND,
Jacob
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
