I just tried a new Sarge install here at my job this time. Now I'm having a different problem. The installer seems to "execute?" dhcp connections alright, at least on the initial cd install (it for instance, gets the domain name correct in the guess for that value, and ifconfig gives an ip address of 172.24.134.214, and it sticks three nameserver ipaddrs in resolv.conf, and I can ping all of these), but when I reboot to engage in the network installation activity, and it gets to the dhcp section, it fails as follows:
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 7 and there are some ten of those with varying intervals until it finally gives up with: No DHCP OFFERS received No working leases in persistent database Exiting. Failed to bring up eth1. and I end up with no network. Perhaps this is a simple problem, but I'm not seeing what it is. The net-dead system has the same resolver stuff, but ifconfig doesn't show a normal ipv4 address (no ip address at all, just a hw one). I can ifconfig the eth1, but it no longer sees anything outside. This behavior is completely consistent, so it certainly makes me WANT to blame it on the install, and not on the LAN here, but who knows. Maybe the install makes some assumptions about open security that the production configuration does not. At any rate,...Help! Please of course. Sincerely, Xeno xc -- Pride before justice equals destabilization. Power before truth equals destruction. Profit before environment equals doom. Xeno Campanoli, [EMAIL PROTECTED], http://www.eskimo.com/~xeno -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
