On Tue, 19 Nov 2002, Burkhard Ritter wrote:
> spass:/home/buri# hdparm -i /dev/hdb
>
> /dev/hdb:
>
> Model=Maxtor 6Y060L0, FwRev=YAR41VW0, SerialNo=Y2R7JV6E
> Config={ Fixed }
> RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
> BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
> CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=120103200
> IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
> PIO modes: pio0 pio1 pio2 pio3 pio4
> DMA modes: mdma0 mdma1 *mdma2 udma0 udma1 udma2 udma3 udma4 udma5 udma6
> AdvancedPM=yes: disabled (255) WriteCache=enabled
> Drive Supports : ataATA-1 ATA-2 ATA-3 ATA-4 ATA-5 ATA-6 ATA-7
>From the LBAsects = 120103200, that tells me at least something sees it
as a 60 gig drive(512byte * 120103200 ~= 60 gig)
When you partitioned it, did cfdisk/fdisk only show a 17 gig partition?
run dmesg, and look for a line somewhat similar to the last one of these,
it should say 60xxx MB or something
hda: QUANTUM FIREBALLP KX13.6, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 26771672 sectors (13707 MB) w/418KiB Cache, CHS=1666/255/63, UDMA(33)
Mike
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
