On Wed, Jun 08, 2005 at 10:16:41PM +0200 or thereabouts, mess-mate wrote:
> Steve A <[EMAIL PROTECTED]> wrote:
> | Greetings.
> |
> | I upgraded my Sarge box to a new 2.4.27 kernel yesterday. When I ran lilo
> | afterwards I'm presented with the following warning;
> |
> | Warning: '/proc/partitions' does not match '/dev' directory structure.
> Name
> | change: '/dev/ide/host0/bus1/target0/lun0/disc' -> '/dev/hdc' Warning:
> The
| boot sector and map file are on different disks.
> | Added Linux *
> | Added LinuxOLD
> |
> | Here is my hard disk layout;
> |
> | Filesystem Size Used Avail Use% Mounted on
> | /dev/hdc1 2.0G 848M 1.1G 46% /
> | tmpfs 94M 4.0K 94M 1% /dev/shm
> | /dev/hda3 4.8G 562M 4.0G 13% /var
> | /dev/hda2 9.2G 893M 7.9G 11% /home
> |
> | I not sure how to fix this, so help would be appreciated. Am I right in
> assuming
> | this box won't reboot with Lilo in this condition ?
> |
> I think so :)
> Check your /etc/lilo.conf to boot your new kernel.
> boot=/dev/hda ??? your MBR
I'm a little confused. How does one determine what partition their /boot is on ?
Here is my directory structure in /boot (It looks to me that my boot is root
?);
But according to Lilo.conf it's different:
(Relevant Lilo.conf line);
boot=/dev/hda
# Specifies the device that should be mounted as root. (`/')
#
root=/dev/hdc1
(boot directory listing);
:/boot# ls -ls
total 11704
224 -rw-r--r-- 1 root root 224124 Mar 4 2004 System.map-2.2.20-idepci
540 -rw-r--r-- 1 root root 548511 Apr 14 2004 System.map-2.4.25-1-386
536 -rw-r--r-- 1 root root 542191 May 16 04:38 System.map-2.4.27-2-386
4 -rw-r--r-- 1 root root 512 Mar 4 2004 boot.0300
0 lrwxrwxrwx 1 root root 11 Mar 4 2004 boot.b -> boot-menu.b
308 -rw-r--r-- 1 root root 308326 May 30 21:31 coffee.bmp
4 -rw-r--r-- 1 root root 3888 Mar 4 2004 config-2.2.20-idepci
44 -rw-r--r-- 1 root root 44109 Apr 14 2004 config-2.4.25-1-386
44 -rw-r--r-- 1 root root 44853 May 16 03:46 config-2.4.27-2-386
0 lrwxrwxrwx 1 root root 13 Jun 24 2004 debian.bmp -> /boot/sid.bmp
156 -rw-r--r-- 1 root root 153720 May 30 21:31 debianlilo.bmp
3756 -rw-r--r-- 1 root root 3842048 May 23 2004 initrd.img-2.4.25-1-386
3712 -rw-r--r-- 1 root root 3796992 Jun 7 01:18 initrd.img-2.4.27-2-386
72 -rw------- 1 root root 69120 Jun 8 15:18 map
24 -rw-r--r-- 1 root root 23662 May 30 21:31 sarge.bmp
24 -rw-r--r-- 1 root root 24116 May 30 21:31 sid.bmp
656 -rw-r--r-- 1 root root 665509 Mar 4 2004 vmlinuz-2.2.20-idepci
796 -rw-r--r-- 1 root root 808860 Apr 14 2004 vmlinuz-2.4.25-1-386
804 -rw-r--r-- 1 root root 816590 May 16 04:38 vmlinuz-2.4.27-2-386
> image=/boot/vmlinuz-2.4.27-2-686
> # or without the /boot if a link is set in /
> label=Deb-2.4.27
> root=/dev/hdc1 # your /
> initrd=/boot/initrd.img-2.4.27-2-686
> append="hdx=ide-scsi" # change the x to yours
> read-only
My present LILO.conf doesn't have the append line, like your example. Is it
necessary to include your depend line ? If you wouldn't mind explaning what this
Stanza does.
Thanks for your time.
--
Steve A.
-----------------------------------------------
Friday Jun 10 2005 10:45:01 EDT
-----------------------------------------------
One of the disadvantages of having children is that they eventually get old
enough to give you presents they make at school.
-- Robert Byrne
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
