On Sunday 08 May 2005 20:17, Peter Klauer wrote: > auto dummy0 > iface dummyo0 inet static > address 192.168.1.10 > netmask 255.255.255.0 > network 192.168.1.0 > broadcast 192.168.1.1 > gateway 192.168.1.1
OK. You still haven't actually said what you're trying to fix: what went wrong with the install, what you want to go back and change, etc. But I'm guessing that everything's OK, except that your network isn't set up. In that case, you could try removing the above lines from /etc/network/interfaces, and replaing them with these: auto eth0 iface eth0 inet dhcp Use the command nano /etc/network/interfaces, delete the lines with control-k, and save then quit using control-x. When you've done that, run: /etc/init.d/networking restart and then try to use the internet somehow. If it doesn't work, and networking is indeed what you're REALLY trying to solve (ie, not some side issue), then you should post any steps you took, error messages you get, and what you hoped to see instead of errors. That way, we'll have a much better idea of the problem, and won't need to waste your time with guesswork. -- Lee. Please send replies to the list, not to my email address. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
