I need some help to get my printer working. Yes, I've read the CUPS Administration manual and searched Google. Either the answers aren't there or I'm not smart enough to see it.
I'm running Debian 3.1 and kernel 2.6.10 on an DEC Alpha SX164 with an HP Officejet 720 attached to the parallel port. I'm using cups with the following printing packages installed:
cupsys 1.1.22-6 cupsys-bsd 1.1.22-6 cupsys-client 1.1.22-6 libcupsimage2 1.1.22-6 libcupsys2-gnutls10 1.1.22-6 libgnomecups1.0-1 0.1.13-1 foomatic-db 20041203-1 foomatic-db-engine 3.0.2-2 foomatic-db-hpijs 1.5-20041013-1 foomatic-filters 3.0.2-3 foomatic-filters-ppds 20041013-1 hpijs 1.7.1-2
Here's the .config info
CONFIG_PARPORT=y CONFIG_PARPORT_PC=y CONFIG_PARPORT_PC_CML1=y # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_OTHER is not set CONFIG_PARPORT_1284=y CONFIG_PRINTER=y
From my /var/log/dmesg:
parport0: PC-style at 0x3bc [PCSPP] parport0: Printer, Hewlett-Packard OfficeJet Series 700 lp: driver loaded but no devices found lp0: using parport0 (polling).
Output from cat /proc/ioports:
0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-0080 : rtc 00a0-00bf : pic2 00c0-00df : dma2 0170-0177 : ide1 01f0-01f7 : ide0 0213-0213 : ISAPnP 0220-022f : SoundBlaster 02f8-02ff : serial 0330-0331 : MPU401 UART 0376-0376 : ide1 0388-0389 : OPL2/3 (left) 038a-038b : OPL2/3 (right) 03bc-03be : parport0 03c0-03df : vga+ 03e8-03ef : serial 03f6-03f6 : ide0 03f8-03ff : serial 0620-0623 : Emu8000-1 0a20-0a23 : Emu8000-2 0a79-0a79 : isapnp write 0e20-0e23 : Emu8000-3 8000-807f : 0000:00:05.0 8000-807f : 0000:00:05.0 8080-808f : 0000:00:08.1 8080-8087 : ide0 8088-808f : ide1
Output from cat /proc/devices:
Character devices: 1 mem 2 pty 3 ttyp 4 /dev/vc/0 4 tty 4 ttyS 5 /dev/tty 5 /dev/console 5 /dev/ptmx 6 lp 7 vcs 10 misc 13 input 14 sound 108 ppp 116 alsa 128 ptm 136 pts
Block devices: 2 fd 3 ide0 22 ide1
From cat /proc/sys/dev/parport/parport0/autoprobe:
CLASS:PRINTER; MODEL:OfficeJet Series 700; MANUFACTURER:Hewlett-Packard; COMMAND SET:MLC,PCL,PML;
I have selected yes to raw printing and option 3 (parallel) when running dpkg-reconfigure cupsys.
The lpinfo -v command shows nothing. Consequently, CUPS Web admin is unable to detect any devices.
Is there's something I'm missing?
Jim
-- -- Jim Woodruff < [EMAIL PROTECTED] >
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
