On Sun, 05 Dec 2004 20:51:47 +0000, Antony Gelberg <[EMAIL PROTECTED]> wrote: > Andrea Vettorello wrote: > > > > On Fri, 03 Dec 2004 17:08:51 +0000, Antony Gelberg <[EMAIL PROTECTED]> > > wrote: > > > >>Hi all, > >> > >>I have just gotten a Radeon 9250, which is really just a Radeon 9200 in > >>disguise. When I try to start X, the display goes between power on / > >>off every couple of seconds or so. The analogue cable works ok, but I > >>resent having to use it as DVI is much better. > >> > >>I'm running unstable, and 2.6.9. I take the liberty of attaching my > >>XF86Config-4. Any ideas? The same config works fine if I replace the > >>card with my old Radeon 9000 Pro. I actually have two of the 9200 cards > >>and neither works. > >> > > > > > > On your X config there's only a video mode present, 1600x1200, don't > > know if with the value in the horizontal and vertical range can works. > > I would add 1280x1024 and 800x600. > > It works fine with my Radeon 9000 Pro card, so I know that 1600x1200 > works at those refresh / sync values. >
I should have checked the model, it's a huge LCD monitor so the frequency are right... =) > > It's not clear, for me at least =), if you are using the DVI output. > > Usually you find DVI support on LCD monitors... > > I'm trying to use the DVI, but it only works with analogue. > Ok, never done myself so better if you google about it, but to use the DVI output i think you need to specify in your XF86Config-4 to use the secondary output (0000:01:00.1) instead of the primary (0000:01:00.0) or using the DDC option of X (and maybe you need the read-edid package) if your monitor is DDC capable. Someone correct me if i'm wrong. Andrea -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
