On Tue, 16 Nov 2004 00:46:01 -0500 Shawn McCuan <[EMAIL PROTECTED]> wrote:
Debian does show your second hard drive, look for;
> hdb: MAXTOR 6L040J2, ATA DISK drive
below.
in a shell type -> sudo fdisk /dev/hdb
and see what it states. Is this formatted for linux or windos?
> I typed in dmesg in Konsole and got the following...im not exactly
> sure what any of it means as i am fairly new to linux.
>
>
> debian:/home/shawn# dmesg
> device 00:11.1
> PCI: Sharing IRQ 11 with 00:0d.0
> PCI: Sharing IRQ 11 with 01:00.0
> Linux NET4.0 for Linux 2.4
> Based upon Swansea University Computer Society NET3.039
> Initializing RT netlink socket
> Starting kswapd
> VFS: Disk quotas vdquot_6.5.1
> devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED])
> devfs: boot_options: 0x0
> pty: 256 Unix98 ptys configured
> Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS
> MULTIPORT SHARE_IRQ SERIAL_PCI enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> ttyS01 at 0x02f8 (irq = 3) is a 16550A
> PCI: Found IRQ 11 for device 00:0d.0
> PCI: Sharing IRQ 11 with 00:11.1
> PCI: Sharing IRQ 11 with 01:00.0
> Redundant entry in serial pci_table. Please send the output of
> lspci -vv, this message (12b9,1008,12b9,00d3)
> and the manufacturer and name of serial board or modem board
> to [EMAIL PROTECTED]
> ttyS04 at port 0x9400 (irq = 11) is a 16550A
> COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co.
> <[EMAIL PROTECTED]> RAMDISK driver initialized: 16 RAM disks of 8192K size
> 1024 blocksize Initializing Cryptographic API
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP: routing cache hash table of 4096 buckets, 32Kbytes
> TCP: Hash tables configured (established 32768 bind 65536)
> Linux IP multicast router 0.06 plus PIM-SM
> RAMDISK: cramfs filesystem found at block 0
> RAMDISK: Loading 3788 blocks [1 disk] into ram disk... done.
> Freeing initrd memory: 3788k freed
> VFS: Mounted root (cramfs filesystem).
> Freeing unused kernel memory: 96k freed
> NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
> ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx ide: late registration of driver.
> PDC20265: IDE controller at PCI slot 00:06.0
> PCI: Found IRQ 5 for device 00:06.0
> PCI: Sharing IRQ 5 with 00:0c.0
> PCI: Sharing IRQ 5 with 00:11.2
> PCI: Sharing IRQ 5 with 00:11.3
> PCI: Sharing IRQ 5 with 00:11.4
> PDC20265: chipset revision 2
> PDC20265: not 100% native mode: will probe irqs later
> PDC20265: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary PCI
> Mode. PDC20265: FORCING BURST BIT 0x00->0x01 ACTIVE
> ide2: BM-DMA at 0xa000-0xa007, BIOS settings: hde:pio, hdf:pio
> ide3: BM-DMA at 0xa008-0xa00f, BIOS settings: hdg:pio, hdh:pio
> VP_IDE: IDE controller at PCI slot 00:11.1
> PCI: Found IRQ 11 for device 00:11.1
> PCI: Sharing IRQ 11 with 00:0d.0
> PCI: Sharing IRQ 11 with 01:00.0
> VP_IDE: chipset revision 6
> VP_IDE: not 100% native mode: will probe irqs later
> ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on
> pci00:11.1
> ide0: BM-DMA at 0x9000-0x9007, BIOS settings: hda:DMA, hdb:DMA
> ide1: BM-DMA at 0x9008-0x900f, BIOS settings: hdc:DMA, hdd:DMA
> hda: MAXTOR 6L040J2, ATA DISK drive
> hdb: MAXTOR 6L040J2, ATA DISK drive
> blk: queue e0825b40, I/O limit 4095Mb (mask 0xffffffff)
> blk: queue e0825c7c, I/O limit 4095Mb (mask 0xffffffff)
> hdc: TDK CDRW401240B, ATAPI CD/DVD-ROM drive
> hdd: LITEON DVD-ROM LTD163, ATAPI CD/DVD-ROM drive
> hde: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> ide2 at 0xb400-0xb407,0xb002 on irq 5
> hda: attached ide-disk driver.
> hda: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=77557/16/63,
> UDMA(100) hdb: attached ide-disk driver.
> hdb: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=77557/16/63,
> UDMA(100) Partition check:
> /dev/ide/host0/bus0/target0/lun0: [PTBL] [4866/255/63] p1 p2 < p5 >
> /dev/ide/host0/bus0/target1/lun0: [PTBL] [4866/255/63] p1
> Journalled Block Device driver loaded
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> Adding Swap: 1550232k swap-space (priority -1)
> EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
> Real Time Clock Driver v1.10f
> hdc: attached ide-cdrom driver.
> hdc: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
> Uniform CD-ROM driver Revision: 3.12
> hdd: attached ide-cdrom driver.
> hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
> irda_init()
> Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002)
> PCI: Found IRQ 5 for device 00:0c.0
> PCI: Sharing IRQ 5 with 00:06.0
> PCI: Sharing IRQ 5 with 00:11.2
> PCI: Sharing IRQ 5 with 00:11.3
> PCI: Sharing IRQ 5 with 00:11.4
> tulip0: MII transceiver #1 config 1000 status 786d advertising 05e1.
> eth0: ADMtek Comet rev 17 at 0x9800, 00:04:5A:55:F8:A9, IRQ 5.
> SCSI subsystem driver Revision: 1.00
> hde: attached ide-scsi driver.
> scsi0 : SCSI host adapter emulation for IDE ATAPI devices
> Vendor: IOMEGA Model: ZIP 100 Rev: 23.D
> Type: Direct-Access ANSI SCSI revision: 00
> cmpci: version $Revision: 6.16 $ time 06:26:44 Sep 3 2004
> PCI: Found IRQ 10 for device 00:05.0
> cmpci: found CM8738 adapter at io 0xb800 irq 10
> cmpci: chip version = 055
> usb.c: registered new driver usbdevfs
> usb.c: registered new driver hub
> usb-uhci.c: $Revision: 1.275 $ time 06:26:46 Sep 3 2004
> usb-uhci.c: High bandwidth mode enabled
> PCI: Found IRQ 5 for device 00:11.2
> PCI: Sharing IRQ 5 with 00:06.0
> PCI: Sharing IRQ 5 with 00:0c.0
> PCI: Sharing IRQ 5 with 00:11.3
> PCI: Sharing IRQ 5 with 00:11.4
> usb-uhci.c: USB UHCI at I/O 0x8800, IRQ 5
> usb-uhci.c: Detected 2 ports
> usb.c: new USB bus registered, assigned bus number 1
> hub.c: USB hub found
> hub.c: 2 ports detected
> PCI: Found IRQ 5 for device 00:11.3
> PCI: Sharing IRQ 5 with 00:06.0
> PCI: Sharing IRQ 5 with 00:0c.0
> PCI: Sharing IRQ 5 with 00:11.2
> PCI: Sharing IRQ 5 with 00:11.4
> usb-uhci.c: USB UHCI at I/O 0x8400, IRQ 5
> usb-uhci.c: Detected 2 ports
> usb.c: new USB bus registered, assigned bus number 2
> hub.c: USB hub found
> hub.c: 2 ports detected
> PCI: Found IRQ 5 for device 00:11.4
> PCI: Sharing IRQ 5 with 00:06.0
> PCI: Sharing IRQ 5 with 00:0c.0
> PCI: Sharing IRQ 5 with 00:11.2
> PCI: Sharing IRQ 5 with 00:11.3
> usb-uhci.c: USB UHCI at I/O 0x8000, IRQ 5
> usb-uhci.c: Detected 2 ports
> usb.c: new USB bus registered, assigned bus number 3
> hub.c: USB hub found
> hub.c: 2 ports detected
> usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
> irda_init()
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x1001
> eth0: Setting full-duplex based on MII#1 link partner capability of
> 41e1. spurious 8259A interrupt: IRQ7.
> cdrom: open failed.
> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
> [drm] Initialized radeon 1.7.0 20020828 on minor 0
> [drm:radeon_unlock] *ERROR* Process 16396 using kernel context 0
> hdd: packet command error: status=0x51 { DriveReady SeekComplete Error
> } hdd: packet command error: error=0x30
> ATAPI device hdd:
> Error: Medium error -- (Sense key=0x03)
> (reserved error code) -- (asc=0x02, ascq=0x00)
> The failed "Read CD" packet command was:
> "be 04 00 00 1a 8e 00 00 01 f8 00 00 "
> cdrom: open failed.
> hdd: command error: status=0x51 { DriveReady SeekComplete Error }
> hdd: command error: error=0x54
> end_request: I/O error, dev 16:40 (hdd), sector 64
> isofs_read_super: bread failed, dev=16:40, iso_blknum=16, block=32
> cdrom: open failed.
> hdd: command error: status=0x51 { DriveReady SeekComplete Error }
> hdd: command error: error=0x54
> end_request: I/O error, dev 16:40 (hdd), sector 64
> isofs_read_super: bread failed, dev=16:40, iso_blknum=16, block=32
> hdd: packet command error: status=0x51 { DriveReady SeekComplete Error
> } hdd: packet command error: error=0x30
> ATAPI device hdd:
> Error: Medium error -- (Sense key=0x03)
> (reserved error code) -- (asc=0x02, ascq=0x00)
> The failed "Read CD" packet command was:
> "be 04 00 00 1a 8e 00 00 01 f8 00 00 "
> hdd: packet command error: status=0x51 { DriveReady SeekComplete Error
> } hdd: packet command error: error=0x30
> ATAPI device hdd:
> Error: Medium error -- (Sense key=0x03)
> (reserved error code) -- (asc=0x02, ascq=0x00)
> The failed "Read CD" packet command was:
> "be 04 00 00 52 e7 00 00 01 f8 00 00 "
> hdd: packet command error: status=0x51 { DriveReady SeekComplete Error
> } hdd: packet command error: error=0x30
> ATAPI device hdd:
> Error: Medium error -- (Sense key=0x03)
> (reserved error code) -- (asc=0x02, ascq=0x00)
> The failed "Read CD" packet command was:
> "be 04 00 00 0f 19 00 00 08 f8 00 00 "
> hdd: packet command error: status=0x51 { DriveReady SeekComplete Error
> } hdd: packet command error: error=0x30
> ATAPI device hdd:
> Error: Medium error -- (Sense key=0x03)
> (reserved error code) -- (asc=0x02, ascq=0x00)
> The failed "Read CD" packet command was:
> "be 04 00 00 15 c8 00 00 08 f8 00 00 "
> hdd: packet command error: status=0x51 { DriveReady SeekComplete Error
> } hdd: packet command error: error=0x30
> ATAPI device hdd:
> Error: Medium error -- (Sense key=0x03)
> (reserved error code) -- (asc=0x02, ascq=0x00)
> The failed "Read CD" packet command was:
> "be 04 00 00 48 2b 00 00 08 f8 00 00 "
> hdd: packet command error: status=0x51 { DriveReady SeekComplete Error
> } hdd: packet command error: error=0x30
> ATAPI device hdd:
> Error: Medium error -- (Sense key=0x03)
> (reserved error code) -- (asc=0x02, ascq=0x00)
> The failed "Read CD" packet command was:
> "be 04 00 00 1a 8e 00 00 01 f8 00 00 "
> hdd: packet command error: status=0x51 { DriveReady SeekComplete Error
> } hdd: packet command error: error=0x30
> ATAPI device hdd:
> Error: Medium error -- (Sense key=0x03)
> (reserved error code) -- (asc=0x02, ascq=0x00)
> The failed "Read CD" packet command was:
> "be 04 00 00 52 e7 00 00 01 f8 00 00 "
> hdd: packet command error: status=0x51 { DriveReady SeekComplete Error
> } hdd: packet command error: error=0x30
> ATAPI device hdd:
> Error: Medium error -- (Sense key=0x03)
> (reserved error code) -- (asc=0x02, ascq=0x00)
> The failed "Read CD" packet command was:
> "be 04 00 00 92 89 00 00 01 f8 00 00 "
> hdd: irq timeout: status=0xd0 { Busy }
> hdd: irq timeout: error=0x00
> hdd: DMA disabled
> hdd: ATAPI reset complete
> hdd: packet command error: status=0x51 { DriveReady SeekComplete Error
> } hdd: packet command error: error=0x30
> ATAPI device hdd:
> Error: Medium error -- (Sense key=0x03)
> (reserved error code) -- (asc=0x02, ascq=0x00)
> The failed "Read CD" packet command was:
> "be 04 00 00 8d 2f 00 00 08 f8 00 00 "
> hdd: packet command error: status=0x51 { DriveReady SeekComplete Error
> } hdd: packet command error: error=0x30
> ATAPI device hdd:
> Error: Medium error -- (Sense key=0x03)
> (reserved error code) -- (asc=0x02, ascq=0x00)
> The failed "Read CD" packet command was:
> "be 04 00 00 8d 2f 00 00 08 f8 00 00 "
> hdd: packet command error: status=0x51 { DriveReady SeekComplete Error
> } hdd: packet command error: error=0x30
> ATAPI device hdd:
> Error: Medium error -- (Sense key=0x03)
> (reserved error code) -- (asc=0x02, ascq=0x00)
> The failed "Read CD" packet command was:
> "be 04 00 00 a7 a0 00 00 08 f8 00 00 "
> hdd: packet command error: status=0x51 { DriveReady SeekComplete Error
> } hdd: packet command error: error=0x30
> ATAPI device hdd:
> Error: Medium error -- (Sense key=0x03)
> (reserved error code) -- (asc=0x02, ascq=0x00)
> The failed "Read CD" packet command was:
> "be 04 00 00 1a 8e 00 00 01 f8 00 00 "
> hdd: packet command error: status=0x51 { DriveReady SeekComplete Error
> } hdd: packet command error: error=0x30
> ATAPI device hdd:
> Error: Medium error -- (Sense key=0x03)
> (reserved error code) -- (asc=0x02, ascq=0x00)
> The failed "Read CD" packet command was:
> "be 04 00 00 e7 39 00 00 08 f8 00 00 "
> hdd: packet command error: status=0x51 { DriveReady SeekComplete Error
> } hdd: packet command error: error=0x30
> ATAPI device hdd:
> Error: Medium error -- (Sense key=0x03)
> (reserved error code) -- (asc=0x02, ascq=0x00)
> The failed "Read CD" packet command was:
> "be 04 00 00 e7 39 00 00 08 f8 00 00 "
> hdd: packet command error: status=0x51 { DriveReady SeekComplete Error
> } hdd: packet command error: error=0x30
> ATAPI device hdd:
> Error: Medium error -- (Sense key=0x03)
> (reserved error code) -- (asc=0x02, ascq=0x00)
> The failed "Read CD" packet command was:
> "be 04 00 01 1f 9b 00 00 06 f8 00 00 "
> hdd: packet command error: status=0x51 { DriveReady SeekComplete Error
> } hdd: packet command error: error=0x30
> ATAPI device hdd:
> Error: Medium error -- (Sense key=0x03)
> (reserved error code) -- (asc=0x02, ascq=0x00)
> The failed "Read CD" packet command was:
> "be 04 00 01 1f 9b 00 00 06 f8 00 00 "
> hdd: packet command error: status=0x51 { DriveReady SeekComplete Error
> } hdd: packet command error: error=0x30
> ATAPI device hdd:
> Error: Medium error -- (Sense key=0x03)
> (reserved error code) -- (asc=0x02, ascq=0x00)
> The failed "Read CD" packet command was:
> "be 04 00 01 96 c6 00 00 02 f8 00 00 "
> hdd: packet command error: status=0x51 { DriveReady SeekComplete Error
> } hdd: packet command error: error=0x30
> ATAPI device hdd:
> Error: Medium error -- (Sense key=0x03)
> (reserved error code) -- (asc=0x02, ascq=0x00)
> The failed "Read CD" packet command was:
> "be 04 00 01 c0 c8 00 00 08 f8 00 00 "
> hdd: packet command error: status=0x51 { DriveReady SeekComplete Error
> } hdd: packet command error: error=0x30
> ATAPI device hdd:
> Error: Medium error -- (Sense key=0x03)
> (reserved error code) -- (asc=0x02, ascq=0x00)
> The failed "Read CD" packet command was:
> "be 04 00 01 c8 1b 00 00 08 f8 00 00 "
> hdd: packet command error: status=0x51 { DriveReady SeekComplete Error
> } hdd: packet command error: error=0x30
> ATAPI device hdd:
> Error: Medium error -- (Sense key=0x03)
> (reserved error code) -- (asc=0x02, ascq=0x00)
> The failed "Read CD" packet command was:
> "be 04 00 00 1a 8e 00 00 01 f8 00 00 "
> hdd: packet command error: status=0x51 { DriveReady SeekComplete Error
> } hdd: packet command error: error=0x30
> ATAPI device hdd:
> Error: Medium error -- (Sense key=0x03)
> (reserved error code) -- (asc=0x02, ascq=0x00)
> The failed "Read CD" packet command was:
> "be 04 00 01 dd 85 00 00 04 f8 00 00 "
> hdd: packet command error: status=0x51 { DriveReady SeekComplete Error
> } hdd: packet command error: error=0x30
> ATAPI device hdd:
> Error: Medium error -- (Sense key=0x03)
> (reserved error code) -- (asc=0x02, ascq=0x00)
> The failed "Read CD" packet command was:
> "be 04 00 02 1b a2 00 00 06 f8 00 00 "
> hdd: packet command error: status=0x51 { DriveReady SeekComplete Error
> } hdd: packet command error: error=0x30
> ATAPI device hdd:
> Error: Medium error -- (Sense key=0x03)
> (reserved error code) -- (asc=0x02, ascq=0x00)
> The failed "Read CD" packet command was:
> "be 04 00 00 1a 8e 00 00 01 f8 00 00 "
> hdd: packet command error: status=0x51 { DriveReady SeekComplete Error
> } hdd: packet command error: error=0x30
> ATAPI device hdd:
> Error: Medium error -- (Sense key=0x03)
> (reserved error code) -- (asc=0x02, ascq=0x00)
> The failed "Read CD" packet command was:
> "be 04 00 00 52 e7 00 00 01 f8 00 00 "
>
>
>
> Rodney D. Myers wrote:
>
> >On Tue, 16 Nov 2004 00:25:36 -0500
> >Shawn McCuan <[EMAIL PROTECTED]> wrote:
> >
> >
> >
> >>Yet another question from me. I have two maxtor hardrives, but,
> >debian>isnt even showing that I have a second hard drive. I want to
> >format>the second hardrive to EXT3 so its compatible with the OS,
> >but, if its>not showing up anywhere that I can see, what should I do?
> >>
> >>Thanks;
> >>Shawn McCuan
> >>A linux newbie...
> >>
> >>
> >
> >What does dmesg show?
> >
> >
> >
>
>
--
Rodney D. Myers <[EMAIL PROTECTED]>
Registered Linux User #96112
ICQ#: AIM#: YAHOO:
18002350 mailman452 mailman42_5
They that can give up essential liberty to obtain a
little temporary safety deserve neither liberty nor safety.
Ben Franklin - 1759
pgpUiy91ofUf9.pgp
Description: PGP signature
