Hello,
I trying to set up a bridge, to work like a hub or switch, for
my internal network.
But when im trying initialise, i dont know why, its freezes.
I tryed to initialise it with:
/etc/init.d/networking restart
ifup -a
All these froze, so, i tryed to do it from hand, and executed:
brclt addbr br0 , and it froze too.
The enter for the bridge on my /etc/network/interfaces is it:
auto br0
iface br0 inet static
address 192.168.1.3
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.2
bridge_ports eth0 eth1
The scenary is:
Two ethernet interfaces: a 3com 3c509 ISA and a Realtek
8129 PCI
The 2.4.27-rc4 kernel compiled by me with support for
the bridge.
and Debian GNU/Linux stable
I dont have no idea how to fix it or make work, if someone
knows, please, tell me! Thanks very much for the attention!
Leonardo Marques
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
