Using 2.6.7; I still try to get cdrdao into burning .bin and .cue The writer is okay (xcdroast works; from user accounts as well); but cdrdao segfaults whenever it is called:
cdrdao write --device 0,0,0 Monty_SD2.cue Cdrdao version 1.1.9 - (C) Andreas Mueller <[EMAIL PROTECTED]> SCSI interface library - (C) Joerg Schilling Paranoia DAE library - (C) Monty Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables. Using libscg version 'schily-0.8' 0,0,0: HL-DT-ST RW/DVD GCC-4241N Rev: A101 Using driver: Generic SCSI-3/MMC - Version 2.0 (options 0x0000) WARNING: Unit not ready, still trying... WARNING: Unit not ready, still trying... Burning entire 74 mins disc. Starting write at speed 4... Pausing 10 seconds - hit CTRL-C to abort. Process can be aborted with QUIT signal (usually CTRL-\). Turning BURN-Proof on Executing power calibration... Power calibration successful. Segmentation fault Always reproducible. 28 Dec 2003 someone suggested to use cdrecord with -dao instead; but also this fails me: cdrecord dev=0,0,0 -dao -useinfo cuefile=Monty_SD2.cue Cdrecord-Clone 2.01a29 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord and thus may have bugs that are not present in the original version. Please send bug reports and support requests to <[EMAIL PROTECTED]>. The original author should not be bothered with problems of this version. scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 3.5.31 Using libscg version 'schily-0.8'. Device type : Removable CD-ROM Version : 2 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identifikation : 'RW/DVD GCC-4241N' Revision : 'A101' Device seems to be: Generic mmc2 DVD-ROM. Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Starting to write CD/DVD at speed 4 in real SAO mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 FF FF FF 6A 00 00 1B 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 63504 cmd finished after 0.103s timeout 200s write track pad data: error after 0 bytes BFree: 1605 K BSize: 1605 K cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 00 00 00 00 1B 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 63504 cmd finished after 0.103s timeout 200s write track data: error after 0 bytes cdrecord: A write error occured. cdrecord: Please properly read the error message above. Any hint welcome, Uwe -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
