On Mon, 26 Jul 2004, Justinas wrote:
> Hi there!
>
> My dmesg output: hdd: command error: status=0x51 { DriveReady SeekComplete
> Error } hdd: command error: error=0x54; /dev/hdd is my sony cd-rom.
> Does anybody faced such a problem?
it means your cdrom is talking at ata-33 speeds and your
disks are talking at ata-100 or ata-133 and your cdrom ( hdd ) keeps
asking everybody to slow down so it can catch up to the ide commands being
issued
- move the cdrom/dvd to an ide cable all by itself ..
- one drive per ide cable .. or you will be transfering data at
the spped of the slowest device on the cable
if hdd was a hard disks... you're disk is probably dying...
c ya
alvin
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
