On Fri, 2004-07-09 at 23:00, disciple wrote: > When I do lsmod, the nic driver shows up (3c59x). eth0 section missing > when I do ifconfig. > When I do .... # ifconfig eth0 up 192.168.0.4 netmask 255.255.255.0 ... > the NIC works and eth0 section also shows when I do .... # ifconfig. > When I reboot, the settings for eth0 disappear. How do I make the > settings permanent?
Since the NIC modules is being loaded at boot, try this:
in the file "/etc/network/interfaces" put in:
auto lo eth0
iface lo inet loopback
iface eth0 inet static
address 192.168.0.4
netmask 255.255.255.0
broadcast 192.168.0.255
gateway 192.168.0.1
Now, I supposed that your default gateway was what I wrote, but change
it as needed. This config will auto config your NIC and loopback
everytime.
If your eth0 is DHCP try this for eth0 instead:
iface eth0 inet dhcp
Good luck.
--
greg, [EMAIL PROTECTED]
The technology that is
Stronger, better, faster: Linux
signature.asc
Description: This is a digitally signed message part
