Hi Adam,
Your hard disk isn't broken, there is a problem whith the bios and
linux, probe tu disable ulra dma on bios setup.
Please tell me since it has gone to you!!
----- Original Message -----
From: Adam Bogacki <[EMAIL PROTECTED]>
Date: Thu, 17 Jun 2004 23:09:44 +1200
Subject: 'DriveReady SeekComplete Error' ?
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Thanks. I tried
rm -rf /dev/dvd
ln -s /dev/hdc /dev/dvd
... but am not having success in mounting dvd and dmesg is giving me
the output below
which I can't interpret. Can someone tell me what
'DriveReady SeekComplete Error' means ?
Adam Bogacki,
[EMAIL PROTECTED]
Tux:~# mount -t iso9660 /dev/hdc /mnt/dvd
mount: block device /dev/hdc is write-protected, mounting read-only
mount: wrong fs type, bad option, bad superblock on /dev/hdc,
or too many mounted file systems
This error message is new. Mounting a Pioneer dvd player - which plays
CD's -
and *also* mounting a CDRW should not be a problem (allowing me
to use cdrecord).
Tux:~# dmesg
<snip>
hdc: ATAPI DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
SCSI subsystem initialized
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x50
end_request: I/O error, dev hdc, sector 64
isofs_fill_super: bread failed, dev=hdc, iso_blknum=16, block=16
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x50
end_request: I/O error, dev hdc, sector 64
isofs_fill_super: bread failed, dev=hdc, iso_blknum=16, block=16
udf: registering filesystem
UDF-fs DEBUG fs/udf/lowlevel.c:57:udf_get_last_session: XA disk: no,
vol_desc_s tart=0
UDF-fs DEBUG fs/udf/super.c:1546:udf_fill_super: Multi-session=0
UDF-fs DEBUG fs/udf/super.c:534:udf_vrs: Starting at sector 16 (2048
byte secto rs)
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x50
end_request: I/O error, dev hdc, sector 64
UDF-fs DEBUG fs/udf/super.c:1282:udf_check_valid: Failed to read byte
32768. As suming open disc. Skipping validity check
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x50
end_request: I/O error, dev hdc, sector 1280796
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
--
(o_
(o_ (o_ //\
(/)_ (\)_ V_/_
Luis Pérez Meliá
