hello people,
I'm using debian potato 2.2r5 on compaq proliant server with kernel 2.4.19 compiled by
hand.
all runs fine until i added a second ethernet controller to address 2 different
networks.
both controllers are Intel 100 Mb ( eepro100 as a module)
the 2 controllers are found by the kernel. eth0 already existent and the new as eth1.
my /etc/network/interfaces looks like :
iface eth0 inet static
address 192.202.193.135
netmask 255.255.255.0
network 192.202.193.0
broadcast 192.202.193.255
gateway 192.202.193.1
iface eth1 inet static
address 11.199.194.165
netmask 255.255.255.224
network 11.199.194.160
broadcast 11.199.194.192
gateway 11.199.194.161
my route table looks like :
root@myhost: route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
11.199.194.160 0.0.0.0 255.255.255.224 U 0 0 0 eth1
192.202.193.0 0.0.0.0 255.255.255.0 U 0 0 0
eth0
0.0.0.0 192.202.193.1 0.0.0.0 UG 0 0
0 eth0
0.0.0.0 11.199.194.161 0.0.0.0 UG 0 0 0
eth1
as we can see there a now 2 default gateways.
Now the problem:
When i run /etc/init.d/networking restart the config is updated and interfaces
reconfigured correctly but they stop responding ( i mean interface eth0 receives
traffic but
nothing goes outside) i did somme tests with tcpdump.
i think is cause of there are 2 def gateways and the kernel don't know on which one
he must respond !?
ifaces are setted 100 Mb/FDX and switch is in autonegociate mode.
What i need is the 2 infaces working and to address the 2 differents networks with the
right gateway.
Any idea ?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
