ian said:
> Section "InputDevice"
> Identifier "Configured Mouse"
> Driver "mouse"
> Option "CorePointer"
> Option "Device" "/dev/psaux"
> Option "Protocol" "PS/2"
> Option "Emulate3Buttons" "true"
> Option "ZAxisMapping" "4 5"
> EndSection
do you have a PS2 mouse connected to /dev/psaux?
> Section "InputDevice"
> Identifier "Generic Mouse"
> Driver "mouse"
> Option "SendCoreEvents" "true"
> Option "Device" "/dev/input/mice" Option
> "Protocol" "ImPS/2"
> Option "Emulate3Buttons" "true"
> Option "ZAxisMapping" "4 5"
> EndSection
Is there a particular reason you have 2 pointers setup? just
curious, I do this on my laptops and on my main desktop because
my KVM is erratic in supporting wheel mice ..
> Section "Device"
> Identifier "NV AGP"
> Driver "nv"
> # BusID "PCI:0:13:0"
> Option "UseFBDev" "true"
I would delete the line that has UseFBDev
> EndSection
> Section "Monitor"
> Identifier "Generic Monitor"
> HorizSync 28-48
> VertRefresh 43-72
> Option "DPMS"
You using a 15" monitor?
> EndSection
> Section "Screen"
> Identifier "Screen AGP"
> Device "NV AGP"
> Monitor "Generic Monitor"
> DefaultDepth 24
> SubSection "Display"
> Depth 1
> Modes "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 4
> Modes "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 8
> Modes "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 15
> Modes "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 16
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 24
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> EndSection
> Section "ServerLayout"
> Identifier "AGP"
> Screen "Screen AGP"
> InputDevice "Generic Keyboard"
> InputDevice "Configured Mouse"
> InputDevice "Generic Mouse"
not sure if this needs updating or not but for my dual mouse
setup I have:
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen 1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Mouse2" "SendCoreEvents"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
> EndSection
> Section "DRI"
> Mode 0666
> EndSection
I don't have this line in my XF86Config-4 either(I use a nvidia
geforce3).
I posted my config here:
http://portal.aphroland.org/~aphro/XF86Config-4
(note I am using the nvidia driver not the nv driver) and my
configuration is for my 19/20" monitors. And despite the
dual-head configuration I am not using that configuration(it
doesn't work for me for some reason, the driver only detects
one of my monitors).
nate
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
