I have installed an Asus ISDNLink 128k card (it says on the box
P-IN100-ST-D, and on the card 80-TA200S106-1) in my debian box. I've
done modconf and added isdn and hisax (I'm using the 2.2.20 kernel). I
installed isapnptools and have tried to use pnpdump to see what the io
and irq parameters should be, but the card doesn't show up in the list
(nothing does). /proc/pci shows a number of cards, including:
Bus 0, device 8, function 0:
Network controller: Unknown vendor Unknown device (rev 0).
Vendor id=675. Device id=1702.
Medium devsel. IRQ 10.
Non-prefetchable 32 bit memory at 0xffbde000 [0xffbde000].
I/O at 0xf400 [0xf401].
Could this be the ISDNLink card? When I try insmod manually with these
parameters I get:
# insmod hisax type=12 io=0xf400 irq=10
Using /lib/modules/2.2.20/misc/hisax.o
/lib/modules/2.2.20/misc/hisax.o: init_module: Device or
resource busy
Hint: insmod errors can be caused by incorrect module
parameters, including
invalid IO or IRQ parameters
I'm trying to follow the instructions in /usr/share/doc/isdnutils/HOWTO,
in the "ISDN ppp daemon, or: internet connection" section. I'm trying
to do Step 1, but I don't think it's working right yet. It would be
nice if Step 1 included instructions on how to check that it is
recognized correctly.
I did also try "insmod hisax" without any parameters, which didn't give
me any errors, but isdnctrl reports "Can't open /dev/isdnctrl or
/dev/isdn/isdnctrl: No such device" and ls -l /dev/isdnctrl
/dev/isdnctrl0 shows:
lrwxrwxrwx 1 root root 9 Oct 21 12:10
/dev/isdnctrl -> isdnctrl0
crw-rw---- 1 root dialout 45, 64 Oct 21 12:10
/dev/isdnctrl0
Which looks right as far as I can tell.
Help! Thanks!
--
Randy Orrison
Keswick Computer Services
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
