hi ya marin
from your list of .config options
-- i'd say you need to turn on the ali option in your kernel
> # CONFIG_AEC62XX_TUNING is not set
> # CONFIG_BLK_DEV_ALI15X3 is not set
> # CONFIG_WDC_ALI15X3 is not set
turn this puppy on ...
vi .config
...
CONFIG_BLK_DEV_ALI15X3=y
make ... blah..blah ..
c ya
alvin
On Thu, 17 Oct 2002, Martin Strauss wrote:
> Hi all,
>
> I've got an ASUS TUA266 mobo (ALi Alladin Pro 5 chipset, ALi M1651 North
> Bridge, ALi M1535D+ South Bridge, ALi M5229 IDE), and I can't get DMA to
> work on my drives:
>
> bruce:~# hdparm -d1 /dev/hda
>
> /dev/hda:
> setting using_dma to 1 (on)
> HDIO_SET_DMA failed: Operation not permitted
> using_dma = 0 (off)
>
> I'd really like to get this working, since:
>
> bruce:~# hdparm -t /dev/hda
>
> /dev/hda:
> Timing buffered disk reads: 64 MB in 20.52 seconds = 3.12 MB/sec
>
> I'm running:
> bruce:~# uname -a
> Linux bruce 2.4.18r20020608 #1 Sat Jun 8 20:12:45 EST 2002 i686 Pentium
> III (Coppermine) GenuineIntel GNU/Linux
>
> dmesg shows:
>
> PCI: No IRQ known for interrupt pin A of device 00:04.0.
> ALI15X3: chipset revision 196
> ALI15X3: not 100% native mode: will probe irqs later
> ALI15X3: simplex device: DMA disabled
> ide0: ALI15X3 Bus-Master DMA disabled (BIOS)
> ALI15X3: simplex device: DMA disabled
> ide1: ALI15X3 Bus-Master DMA disabled (BIOS)
> keyboard: Timeout - AT keyboard not present?(ed)
> keyboard: Timeout - AT keyboard not present?(f4)
> hda: QUANTUM FIREBALLP LM30, ATA DISK drive
> hdb: Pioneer DVD-ROM ATAPIModel DVD-105S 012, ATAPI CD/DVD-ROM drive
> hdc: SONY CD-RW CRX140E, ATAPI CD/DVD-ROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
>
> and the IDE part of my kernel config is:
> #
> # ATA/IDE/MFM/RLL support
> #
> CONFIG_IDE=y
>
> #
> # IDE, ATA and ATAPI Block devices
> #
> CONFIG_BLK_DEV_IDE=y
>
> #
> # Please see Documentation/ide.txt for help/info on IDE drives
> #
> # CONFIG_BLK_DEV_HD_IDE is not set
> # CONFIG_BLK_DEV_HD is not set
> CONFIG_BLK_DEV_IDEDISK=y
> CONFIG_IDEDISK_MULTI_MODE=y
> # CONFIG_BLK_DEV_IDEDISK_VENDOR is not set
> # CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set
> # CONFIG_BLK_DEV_IDEDISK_IBM is not set
> # CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set
> # CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set
> # CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set
> # CONFIG_BLK_DEV_IDEDISK_WD is not set
> # CONFIG_BLK_DEV_COMMERIAL is not set
> # CONFIG_BLK_DEV_TIVO is not set
> # CONFIG_BLK_DEV_IDECS is not set
> CONFIG_BLK_DEV_IDECD=y
> # CONFIG_BLK_DEV_IDETAPE is not set
> # CONFIG_BLK_DEV_IDEFLOPPY is not set
> CONFIG_BLK_DEV_IDESCSI=m
>
> #
> # IDE chipset support/bugfixes
> #
> CONFIG_BLK_DEV_CMD640=y
> # CONFIG_BLK_DEV_CMD640_ENHANCED is not set
> # CONFIG_BLK_DEV_ISAPNP is not set
> CONFIG_BLK_DEV_RZ1000=y
> CONFIG_BLK_DEV_IDEPCI=y
> CONFIG_IDEPCI_SHARE_IRQ=y
> CONFIG_BLK_DEV_IDEDMA_PCI=y
> CONFIG_BLK_DEV_ADMA=y
> # CONFIG_BLK_DEV_OFFBOARD is not set
> CONFIG_IDEDMA_PCI_AUTO=y
> CONFIG_BLK_DEV_IDEDMA=y
> # CONFIG_IDEDMA_PCI_WIP is not set
> # CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
> # CONFIG_BLK_DEV_AEC62XX is not set
> # CONFIG_AEC62XX_TUNING is not set
> # CONFIG_BLK_DEV_ALI15X3 is not set
> # CONFIG_WDC_ALI15X3 is not set
> # CONFIG_BLK_DEV_AMD74XX is not set
> # CONFIG_AMD74XX_OVERRIDE is not set
> # CONFIG_BLK_DEV_CMD64X is not set
> # CONFIG_BLK_DEV_CY82C693 is not set
> # CONFIG_BLK_DEV_CS5530 is not set
> # CONFIG_BLK_DEV_HPT34X is not set
> # CONFIG_HPT34X_AUTODMA is not set
> # CONFIG_BLK_DEV_HPT366 is not set
> # CONFIG_BLK_DEV_PIIX is not set
> # CONFIG_PIIX_TUNING is not set
> # CONFIG_BLK_DEV_NS87415 is not set
> # CONFIG_BLK_DEV_OPTI621 is not set
> # CONFIG_BLK_DEV_PDC202XX is not set
> # CONFIG_PDC202XX_BURST is not set
> # CONFIG_PDC202XX_FORCE is not set
> # CONFIG_BLK_DEV_SVWKS is not set
> # CONFIG_BLK_DEV_SIS5513 is not set
> # CONFIG_BLK_DEV_SLC90E66 is not set
> # CONFIG_BLK_DEV_TRM290 is not set
> # CONFIG_BLK_DEV_VIA82CXXX is not set
> # CONFIG_IDE_CHIPSETS is not set
> CONFIG_IDEDMA_AUTO=y
> # CONFIG_IDEDMA_IVB is not set
> # CONFIG_DMA_NONPCI is not set
> CONFIG_BLK_DEV_IDE_MODES=y
> # CONFIG_BLK_DEV_ATARAID is not set
> # CONFIG_BLK_DEV_ATARAID_PDC is not set
> # CONFIG_BLK_DEV_ATARAID_HPT is not set
>
> Thanks for your help
>
> Martin
>
> --
> pgp public key at http://ocsc.ormond.unimelb.edu.au/~mstrauss/pgp_key.asc
> or send email with subject: request key
> Key fingerprint: C1C3 0D9B 8874 2181 F9DC DCCE 22A2 ECB5 4410 5F14
>
> -----BEGIN GEEK CODE BLOCK-----
> Version: 3.1
> GCS/E/MU d? s: a--- C++++ UL+++++$ P++ L++(+++) E--- W+++ N+++ o+ K?
> w--- O- M-- V- PS+++ PE Y++ PGP+++ t- 5- X- R+++ !tv b++++ DI+++
> D+(+++) G++++ e* h++ r% y+
> ------END GEEK CODE BLOCK------
>
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
