Hello,
Just got my OmniFlash Uno reader for Sony memsticks. Doesn't work and
scanning through the google archives didn't help me out.
'cat /proc/scsi/scsi' gives me
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: SONY Model: CD-ROM CDU5211 Rev: YYS7
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: PLEXTOR Model: CD-R PX-W2410A Rev: 1.04
Type: CD-ROM ANSI SCSI revision: 02
so the usb device is not being seen.
'lsmod' gives:
Module Size Used by Not tainted
ide-scsi 7488 0
sg 24452 0 (autoclean)
binfmt_misc 5636 1
ipt_limit 960 11 (autoclean)
ipt_state 608 13 (autoclean)
ipt_LOG 3136 11
ip_conntrack_ftp 3200 0 (unused)
iptable_mangle 2112 0 (autoclean) (unused)
iptable_nat 12660 0 (autoclean) (unused)
ip_conntrack 12684 3 (autoclean) [ipt_state ip_conntrack_ftp
iptable_nat]
iptable_filter 1728 1 (autoclean)
ip_tables 10432 8 [ipt_limit ipt_state ipt_LOG iptable_mangle
iptable_nat iptable_filter]
emu10k1 55712 1
ac97_codec 9568 0 [emu10k1]
parport_pc 25704 0 (autoclean) (unused)
lp 6912 0 (autoclean)
parport 21728 0 (autoclean) [parport_pc lp]
sound 52876 0 [emu10k1]
soundcore 3236 7 [emu10k1 sound]
eepro100 17264 1
mousedev 3776 1
keybdev 1664 0 (unused)
input 3072 0 [mousedev keybdev]
'modprobe usb-uhci' results in:
/lib/modules/2.4.18-bf2.4/kernel/drivers/usb/usb-uhci.o: init_module: No such
device
Hint: insmod errors can be caused by incorrect module parameters, including
invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.18-bf2.4/kernel/drivers/usb/usb-uhci.o: insmod
/lib/modules/2.4.18-bf2.4/kernel/drivers/usb/usb-uhci.o failed
/lib/modules/2.4.18-bf2.4/kernel/drivers/usb/usb-uhci.o: insmod usb-uhci failed
Can anyone help me with this, please?
Joh
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
