Hi
>From an earlier post ... I am having problems getting my
pci parallel port card to work.
I am trying to use a plip connection over it.
output of lsmod
Module Size Used by Tainted: P
plip 10760 0 (unused)
parport_pc 14980 1
parport 24576 1 [plip parport_pc]
r128 82840 1
slip 7904 2 (autoclean)
ppp_deflate 39040 0 (unused)
ppp_generic 14088 0 [ppp_deflate]
slhc 4352 1 [slip ppp_generic]
rtc 5368 0 (autoclean)
Contents of my /etc/modutils/parport file
options parport_pc io=0x378,0x278 irq=auto,auto
options lp parport=0
options plip parport=1
When the box boots I can see where the BIOS sees the onboard parallel
port at 0x378
There is a section of PCI devices I can see a communication device using
IRQ 10 as well as my two ethernet cards...
Paritial Contents of /proc/pci file
Bus 2, device 2, function 0:
Communication controller: PCI device 9710:9805 (rev 1).
IRQ 10.
Master Capable. Latency=32.
I/O at 0xac00 [0xac07].
I/O at 0xa800 [0xa807].
I/O at 0xa400 [0xa407].
I/O at 0xa000 [0xa007].
I/O at 0x9c00 [0x9c07].
I/O at 0x9800 [0x980f].
Bus 2, device 3, function 0:
Ethernet controller: Intel Corp. 82557 [Ethernet Pro 100] (rev 12).
IRQ 11.
Master Capable. Latency=32. Min Gnt=8.Max Lat=56.
Non-prefetchable 32 bit memory at 0xefeff000 [0xefefffff].
I/O at 0x9400 [0x943f].
Non-prefetchable 32 bit memory at 0xefec0000 [0xefedffff].
Bus 2, device 4, function 0:
Ethernet controller: Intel Corp. 82557 [Ethernet Pro 100] (#2) (rev 12).
IRQ 9.
Master Capable. Latency=32. Min Gnt=8.Max Lat=56.
Non-prefetchable 32 bit memory at 0xefefe000 [0xefefefff].
I/O at 0x9000 [0x903f].
Non-prefetchable 32 bit memory at 0xefea0000 [0xefebffff].
Is the address wrong in the /etc/modutils/parport file?
What is the long string of addresses listed....
I/O at 0xac00 [0xac07].
I/O at 0xa800 [0xa807].
I/O at 0xa400 [0xa407].
I/O at 0xa000 [0xa007].
I/O at 0x9c00 [0x9c07].
I/O at 0x9800 [0x980f].
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
