Hi Hanasaki, > I would not assume that the settings are the same. > > Run 'make menuconfig' and check > > Be sure of the following are compiled into the kernel: > ext2, ext3, reiserfs > ide & scsi support for your ide/scsi chips/boards Well, as I am trying this for three weeks now and tried more than thirty different kernels. I am not going to follow this path.
My question is: How can I get the settings for the kernel shipped with woody (24.18-bf). It works. And I can start from there. Or .. Would it help to go to a newer version than woody? Would it have xfree 4.2 and acpi already built in? > > How are you getting to a shell to check /var/log <which is a directory > not a file???> to look for messages if the kernel panics and halts? > Because I kept the standard kernel and added it to lilo. So I am able to resurrect the system, but obviously without the features I need (acpi). > If you need more specific help, provide more specifics on your process > and StepByStep results. > I did this a couple of times. See other postings. As I am very much suspecting the procedures to be the source of trouble (why else should not even one of my roll your own kernels work) I will go into the details again. apt-get remove kernel-source-2.4.18 kernel-package rm -rf /usr/src/linux rm -rf /usr/src/kernel-source-2.4.18.tar.bz2 rm -rf /lib/modules/2.4.18 apt-get install kernel-source-2.4.18 kernel-package cd /usr/src tar xvjf kernel-source-2.4.18.tar.bz2 ln -s kernel-source-2.4.18.tar.bz2 linux cd linux make-kpkg clean make-kpkg -config=x --revision=sonyVaioGrx316G kernel_image dpkg -i /usr/src/kernel-image-2.4.18_sonyVaioGrx316G_i386.deb reboot Hopefully I got the steps right. ACPI patch and other necessary things have been left out since two weeks to reduce complexity. I also attached the current .config file. But this doesn't make much difference as no config has worked so far. But as this one is a clean and untouched one, we probably can start from there. The only thing I changed is: CONFIG_IDE=y CONFIG_EXT3_FS=y Any help is appreciated. Mariano On Sat, 2002-09-28 at 01:54, Hanasaki JiJi wrote: > I would not assume that the settings are the same. > > Run 'make menuconfig' and check > > Be sure of the following are compiled into the kernel: > ext2, ext3, reiserfs > ide & scsi support for your ide/scsi chips/boards > > Verify that your lilo.conf has the right settings for partitions and > kernel file from the dpkg -i yourkernel.deb > > How are you getting to a shell to check /var/log <which is a directory > not a file???> to look for messages if the kernel panics and halts? > > If you need more specific help, provide more specifics on your process > and StepByStep results. > > Mariano Kamp wrote: > > Hi, > > > > I still haven't given up yet to compile my own kernel, but I am nearly > > there. Meanhwile I removed the kernel and the kernel source packages and > > installed them again. But even from the scratch without changing > > anything I get a kernel panic from my compiled kernel. Aren't the > > default settings being supposed to be the same as the standard kernel > > shipped? The standard kernel is working though. > > > > Problem is it doesn't support acpi out of the box and afaik I need > > acpi if I don't want to burn the processor on this particular machine > > (as described on linux-laptop.org). > > > > For the record .. I am using woody on a sony vaio grx316g. > > > > Btw. I also bought a null modem cabel to get the console messages from > > the kernel before the panic, but unfortunately I found out that my > > laptop has three usb, and firewire and ..., but not a serial port :-( > > Are there any other ways to see the kernel messages? I believe that the > > file system is not mounted at that point in time and probably because of > > that I don't see any relevant messages below /var/log. > > > > Cheers, > > Mariano > > > > > > > > > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > # # Automatically generated make config: don't edit # CONFIG_X86=y CONFIG_ISA=y # CONFIG_SBUS is not set CONFIG_UID16=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y # # Loadable module support # CONFIG_MODULES=y CONFIG_MODVERSIONS=y # CONFIG_KMOD is not set # # Processor type and features # CONFIG_M386=y # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MELAN is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set # CONFIG_X86_CMPXCHG is not set # CONFIG_X86_XADD is not set CONFIG_X86_L1_CACHE_SHIFT=4 CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_X86_PPRO_FENCE=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set CONFIG_MATH_EMULATION=y # CONFIG_MTRR is not set # CONFIG_SMP is not set # CONFIG_X86_UP_APIC is not set # # General setup # CONFIG_NET=y CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y # CONFIG_PCI_NAMES is not set # CONFIG_EISA is not set # CONFIG_MCA is not set # CONFIG_HOTPLUG is not set # CONFIG_PCMCIA is not set # CONFIG_HOTPLUG_PCI is not set CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_SYSCTL is not set CONFIG_KCORE_ELF=y # CONFIG_KCORE_AOUT is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_PM is not set # CONFIG_APM_IGNORE_USER_SUSPEND is not set # CONFIG_APM_DO_ENABLE is not set # CONFIG_APM_CPU_IDLE is not set # CONFIG_APM_DISPLAY_BLANK is not set # CONFIG_APM_RTC_IS_GMT is not set # CONFIG_APM_ALLOW_INTS is not set # CONFIG_APM_REAL_MODE_POWER_OFF is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # # CONFIG_PARPORT is not set # # Plug and Play configuration # # CONFIG_PNP is not set # # Block devices # CONFIG_BLK_DEV_FD=y CONFIG_BLK_DEV_XD=m # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set CONFIG_BLK_DEV_LOOP=m # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y # # Multi-device support (RAID and LVM) # # CONFIG_MD is not set # # Networking options # # CONFIG_PACKET is not set # CONFIG_NETLINK_DEV is not set # CONFIG_NETFILTER is not set # CONFIG_FILTER is not set # CONFIG_UNIX is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set # CONFIG_INET_ECN is not set # CONFIG_SYN_COOKIES is not set # CONFIG_IPV6 is not set # CONFIG_KHTTPD is not set # CONFIG_ATM is not set # CONFIG_VLAN_8021Q is not set # # # CONFIG_IPX=m # CONFIG_IPX_INTERN is not set CONFIG_ATALK=m # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_LLC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Telephony Support # # CONFIG_PHONE is not set # # ATA/IDE/MFM/RLL support # # CONFIG_IDE is not set CONFIG_IDE=y # CONFIG_BLK_DEV_IDE_MODES is not set # CONFIG_BLK_DEV_HD is not set # # SCSI support # CONFIG_SCSI=m # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=m CONFIG_SD_EXTRA_DEVS=40 CONFIG_CHR_DEV_ST=m # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_SR_EXTRA_DEVS=2 CONFIG_CHR_DEV_SG=m # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_DEBUG_QUEUES is not set CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set CONFIG_SCSI_7000FASST=m # CONFIG_SCSI_ACARD is not set CONFIG_SCSI_AHA152X=m CONFIG_SCSI_AHA1542=m CONFIG_SCSI_AHA1740=m # CONFIG_SCSI_AACRAID is not set CONFIG_SCSI_AIC7XXX=m CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 CONFIG_AIC7XXX_RESET_DELAY_MS=15000 # CONFIG_AIC7XXX_BUILD_FIRMWARE is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_DPT_I2O is not set CONFIG_SCSI_ADVANSYS=m CONFIG_SCSI_IN2000=m CONFIG_SCSI_AM53C974=m # CONFIG_SCSI_MEGARAID is not set CONFIG_SCSI_BUSLOGIC=m # CONFIG_SCSI_OMIT_FLASHPOINT is not set # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set CONFIG_SCSI_DTC3280=m CONFIG_SCSI_EATA=m # CONFIG_SCSI_EATA_TAGGED_QUEUE is not set # CONFIG_SCSI_EATA_LINKED_COMMANDS is not set CONFIG_SCSI_EATA_MAX_TAGS=16 CONFIG_SCSI_EATA_DMA=m CONFIG_SCSI_EATA_PIO=m CONFIG_SCSI_FUTURE_DOMAIN=m # CONFIG_SCSI_GDTH is not set CONFIG_SCSI_GENERIC_NCR5380=m # CONFIG_SCSI_GENERIC_NCR53C400 is not set CONFIG_SCSI_G_NCR5380_PORT=y # CONFIG_SCSI_G_NCR5380_MEM is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set CONFIG_SCSI_NCR53C406A=m CONFIG_SCSI_NCR53C7xx=m # CONFIG_SCSI_NCR53C7xx_sync is not set CONFIG_SCSI_NCR53C7xx_FAST=y CONFIG_SCSI_NCR53C7xx_DISCONNECT=y # CONFIG_SCSI_SYM53C8XX_2 is not set CONFIG_SCSI_NCR53C8XX=m # CONFIG_SCSI_SYM53C8XX is not set CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8 CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 CONFIG_SCSI_NCR53C8XX_SYNC=20 # CONFIG_SCSI_NCR53C8XX_PROFILE is not set # CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set # CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set CONFIG_SCSI_PAS16=m # CONFIG_SCSI_PCI2000 is not set # CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_PSI240I is not set CONFIG_SCSI_QLOGIC_FAS=m CONFIG_SCSI_QLOGIC_ISP=m # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_SEAGATE=m # CONFIG_SCSI_SIM710 is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC390T is not set CONFIG_SCSI_T128=m CONFIG_SCSI_U14_34F=m # CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set CONFIG_SCSI_U14_34F_MAX_TAGS=8 CONFIG_SCSI_ULTRASTOR=m # CONFIG_SCSI_DEBUG is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # CONFIG_FUSION_BOOT is not set # CONFIG_FUSION_ISENSE is not set # CONFIG_FUSION_CTL is not set # CONFIG_FUSION_LAN is not set # # IEEE 1394 (FireWire) support (EXPERIMENTAL) # # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set # # Network device support # CONFIG_NETDEVICES=y # # ARCnet devices # CONFIG_ARCNET=m # CONFIG_ARCNET_1201 is not set CONFIG_ARCNET_1051=m # CONFIG_ARCNET_RAW is not set # CONFIG_ARCNET_COM90xx is not set # CONFIG_ARCNET_COM90xxIO is not set # CONFIG_ARCNET_RIM_I is not set # CONFIG_ARCNET_COM20020 is not set # # Appletalk devices # # CONFIG_APPLETALK is not set # CONFIG_LTPC is not set # CONFIG_COPS is not set # CONFIG_IPDDP is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_EQUALIZER=m # CONFIG_TUN is not set # CONFIG_ETHERTAP is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set CONFIG_NET_VENDOR_3COM=y CONFIG_EL1=m CONFIG_EL2=m CONFIG_ELPLUS=m CONFIG_EL16=m CONFIG_EL3=m # CONFIG_3C515 is not set CONFIG_VORTEX=m CONFIG_LANCE=y CONFIG_NET_VENDOR_SMC=y CONFIG_WD80x3=m CONFIG_ULTRA=m CONFIG_SMC9194=m # CONFIG_NET_VENDOR_RACAL is not set CONFIG_AT1700=m CONFIG_DEPCA=m CONFIG_HP100=m CONFIG_NET_ISA=y CONFIG_E2100=m CONFIG_EWRK3=m CONFIG_EEXPRESS=m CONFIG_EEXPRESS_PRO=m CONFIG_HPLAN_PLUS=m CONFIG_HPLAN=m # CONFIG_LP486E is not set CONFIG_ETH16I=m CONFIG_NE2000=m # CONFIG_NET_PCI is not set CONFIG_NET_POCKET=y CONFIG_ATP=y CONFIG_DE600=m CONFIG_DE620=m # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_SK98LIN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set # CONFIG_PPP_ASYNC is not set # CONFIG_PPP_SYNC_TTY is not set # CONFIG_PPP_DEFLATE is not set # CONFIG_PPP_BSDCOMP is not set # CONFIG_PPPOE is not set CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y # CONFIG_SLIP_MODE_SLIP6 is not set # # Wireless LAN (non-hamradio) # CONFIG_NET_RADIO=y CONFIG_STRIP=m CONFIG_WAVELAN=m # CONFIG_ARLAN is not set # CONFIG_AIRONET4500 is not set # CONFIG_AIRO is not set # CONFIG_HERMES is not set # # Wireless Pcmcia cards support # # CONFIG_AIRO_CS is not set CONFIG_NET_WIRELESS=y # # Token Ring devices # CONFIG_TR=y CONFIG_IBMTR=m # CONFIG_IBMOL is not set # CONFIG_IBMLS is not set # CONFIG_TMS380TR is not set # CONFIG_SMCTR is not set # CONFIG_NET_FC is not set # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set # # Wan interfaces # # CONFIG_WAN is not set # # Amateur Radio support # # CONFIG_HAMRADIO is not set # # IrDA (infrared) support # # CONFIG_IRDA is not set # # ISDN subsystem # CONFIG_ISDN=m CONFIG_ISDN_PPP=y CONFIG_ISDN_PPP_VJ=y CONFIG_ISDN_MPP=y # CONFIG_ISDN_PPP_BSDCOMP is not set CONFIG_ISDN_AUDIO=y # CONFIG_ISDN_TTY_FAX is not set # # ISDN feature submodules # # CONFIG_ISDN_DRV_LOOP is not set # CONFIG_ISDN_DIVERSION is not set # # low-level hardware drivers # # # Passive ISDN cards # # CONFIG_ISDN_DRV_HISAX is not set # # Active ISDN cards # CONFIG_ISDN_DRV_ICN=m CONFIG_ISDN_DRV_PCBIT=m # CONFIG_ISDN_DRV_SC is not set # CONFIG_ISDN_DRV_ACT2000 is not set # CONFIG_ISDN_DRV_EICON is not set # CONFIG_ISDN_DRV_TPAM is not set # CONFIG_ISDN_CAPI is not set # CONFIG_HYSDN is not set # # Old CD-ROM drivers (not SCSI, not IDE) # CONFIG_CD_NO_IDESCSI=y CONFIG_AZTCD=m CONFIG_GSCD=m CONFIG_SBPCD=m CONFIG_MCD=m CONFIG_MCD_IRQ=11 CONFIG_MCD_BASE=300 CONFIG_MCDX=m CONFIG_OPTCD=m CONFIG_CM206=m CONFIG_SJCD=m CONFIG_ISP16_CDI=m CONFIG_CDU31A=m CONFIG_CDU535=m # # Input core support # # CONFIG_INPUT is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # # Character devices # # CONFIG_VT is not set CONFIG_SERIAL=m # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_UNIX98_PTYS is not set # # I2C support # # CONFIG_I2C is not set # # Mice # CONFIG_BUSMOUSE=m CONFIG_ATIXL_BUSMOUSE=m # CONFIG_LOGIBUSMOUSE is not set CONFIG_MS_BUSMOUSE=m CONFIG_MOUSE=y CONFIG_PSMOUSE=m CONFIG_82C710_MOUSE=y # CONFIG_PC110_PAD is not set # # Joysticks # # CONFIG_INPUT_GAMEPORT is not set # # Input core support is needed for gameports # # # Input core support is needed for joysticks # # CONFIG_QIC02_TAPE is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_INTEL_RNG is not set # CONFIG_NVRAM is not set # CONFIG_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # Ftape, the floppy tape device driver # CONFIG_FTAPE=m # CONFIG_ZFTAPE is not set CONFIG_FT_NR_BUFFERS=3 # CONFIG_FT_PROC_FS is not set CONFIG_FT_NORMAL_DEBUG=y # CONFIG_FT_FULL_DEBUG is not set # CONFIG_FT_NO_TRACE is not set # CONFIG_FT_NO_TRACE_AT_ALL is not set # # Hardware configuration # CONFIG_FT_STD_FDC=y # CONFIG_FT_MACH2 is not set # CONFIG_FT_PROBE_FC10 is not set # CONFIG_FT_ALT_FDC is not set CONFIG_FT_FDC_THR=8 CONFIG_FT_FDC_MAX_RATE=2000 CONFIG_FT_ALPHA_CLOCK=0 # CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_MWAVE is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # File systems # # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m # CONFIG_HFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EXT3_FS is not set CONFIG_EXT3_FS=y # CONFIG_JBD is not set CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_UMSDOS_FS=m CONFIG_VFAT_FS=m # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_TMPFS is not set # CONFIG_RAMFS is not set CONFIG_ISO9660_FS=m # CONFIG_JOLIET is not set # CONFIG_ZISOFS is not set CONFIG_MINIX_FS=y # CONFIG_VXFS_FS is not set # CONFIG_NTFS_FS is not set CONFIG_HPFS_FS=m CONFIG_PROC_FS=y # CONFIG_DEVFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_EXT2_FS=y CONFIG_SYSV_FS=m # CONFIG_UDF_FS is not set CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # # Network File Systems # # CONFIG_CODA_FS is not set # CONFIG_INTERMEZZO_FS is not set CONFIG_NFS_FS=m # CONFIG_NFS_V3 is not set # CONFIG_NFSD is not set CONFIG_SUNRPC=m CONFIG_LOCKD=m CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set CONFIG_NCP_FS=m # CONFIG_NCPFS_PACKET_SIGNING is not set # CONFIG_NCPFS_IOCTL_LOCKING is not set # CONFIG_NCPFS_STRONG is not set # CONFIG_NCPFS_NFS_NS is not set # CONFIG_NCPFS_OS2_NS is not set # CONFIG_NCPFS_SMALLDOS is not set # CONFIG_NCPFS_NLS is not set # CONFIG_NCPFS_EXTRAS is not set # CONFIG_ZISOFS_FS is not set # CONFIG_ZLIB_FS_INFLATE is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_SMB_NLS=y CONFIG_NLS=y # # Native Language Support # CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ISO8859_1 is not set # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # # Sound # CONFIG_SOUND=m # CONFIG_SOUND_BT878 is not set # CONFIG_SOUND_CMPCI is not set # CONFIG_SOUND_EMU10K1 is not set # CONFIG_SOUND_FUSION is not set # CONFIG_SOUND_CS4281 is not set # CONFIG_SOUND_ES1370 is not set # CONFIG_SOUND_ES1371 is not set # CONFIG_SOUND_ESSSOLO1 is not set # CONFIG_SOUND_MAESTRO is not set # CONFIG_SOUND_MAESTRO3 is not set # CONFIG_SOUND_ICH is not set # CONFIG_SOUND_RME96XX is not set # CONFIG_SOUND_SONICVIBES is not set # CONFIG_SOUND_TRIDENT is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set # CONFIG_SOUND_VIA82CXXX is not set # CONFIG_SOUND_OSS is not set # # USB support # # CONFIG_USB is not set # # USB Controllers # # # USB Device Class drivers # # # USB Human Interface Devices (HID) # # # Input core support is needed for USB HID # # # USB Imaging devices # # # USB Multimedia devices # # # Video4Linux support is needed for USB Multimedia device support # # # USB Network adaptors # # # USB port drivers # # # USB Serial Converter support # # # USB Miscellaneous drivers # # # Bluetooth support # # CONFIG_BLUEZ is not set # # Kernel hacking # # CONFIG_DEBUG_KER -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
