Thanks for the repsonse, here's my details: http://members.rogers.com/npollock1/sysinfo.txt
Neal. ----- Original Message ----- From: "nate" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, September 26, 2002 2:46 PM Subject: Re: eth0 problem after kernal package upgrade > Neal Pollock said: > > i recently upgraded my kernel from 2.2.20 to 2.4.18 using a kernel image > > via dselect. Unfortunately when I boot the new kernel i cannot establish > > an internet connection. Am I correct in assuming that i need to to > > check: > > > > a) eth0 is properly configured > > b) dhcpclient obtained an IP > > > > inorder to troubleshoot this problem. i thought the new kernel would run > > all my old services and leave my system configuration untouched. what's > > happening? > > do you have an eth0 interface? maybe the new kernel doesn't have a working > driver for your NIC(unlikely but it is possible). what kind of NIC? > > 2.2.x to 2.4.x is a MASSIVE upgrade so it's not unusual to have such a > problem IMO. > > so questions: > > what NIC chipset > what driver are you using > whats the output of 'lsmod' > whats the output of 'ifconfig -a' > whats the output of 'route -n' > whats the output of 'dmesg' > > preferrably if you can post this on a website and post a link to > the site rather then email everything that would be best, save some > people some bandwidth. > > nate > > > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
