On Thu, 31 Jul 2003 04:40:11 +0200, alexander schmidt wrote: > hallo, > > beim versuch den kernel-patch-freeswan fuer woody kernel-source-2.2.20 > einzuspielen habe ich schwierigkeiten (mache ich einen fehler!?) Wieso verwendest du keinen 2.4 kernel? Ich habe mit einem 2.4.21 Kernel keine Probleme mit einer Gr��e von 1,4 Mb. > > > minimalsysstem installiert > apt-get upgrade (sources.lists <--> woody > http://channel.debian.de/faq/ch-dpkgundco.html#s-sources) > apt-get install kernel-source-2.2.20 gcc kernel-package libncurses5-dev > kernel-patch-freeswan bin86 > tar jxvf kernel-source-2.2.20.tar.bz2 > ln -s kernel-source-2.2.20 linux > cd linux > make-kpkg clean > export PATCH_THE_KERNEL=YES > make-kpkg --config=menuconfig --added-patches=freeswan --revision=cu > stom.1.0 kernel_image modules_image > > sobald menuconfig geladen ist benutze ich > Load alternate Configuration File, dann /boot/config-2.2.20 und > speichern. > > > ich frage mich wieso das system zu gross ist? wenn dies der > einzigste fehler ist? Versuche, einige Optionen als Modul zu kompilieren. > > > > weiss jemand rat > gruesse alex > > > ...{standard input}:555: Warning: using `%eax' instead of `%ax' due > to `l' suffix > {standard input}:555: Warning: using `%eax' instead of `%ax' due to `l' > suffix > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -c -o signal.o signal.c > {standard input}: Assembler messages: > {standard input}:1178: Warning: using `%edx' instead of `%dx' due to `l' > suffix > {standard input}:1189: Warning: using `%edx' instead of `%dx' due to `l' > suffix > cc -D__KERNEL__ -I/usr/src/linux/include -D__ASSEMBLY__ -D__SMP__ -tradition > al -c entry.S -o entry.o > /tmp/ccThIalZ.s: Assembler messages: > /tmp/ccThIalZ.s:1810: Warning: using `%edx' instead of `%dx' due to `l' > suffix > /tmp/ccThIalZ.s:1810: Warning: using `%edx' instead of `%dx' due to `l' > suffix > /tmp/ccThIalZ.s:1850: Warning: using `%edx' instead of `%dx' due to `l' > suffix > /tmp/ccThIalZ.s:1850: Warning: using `%edx' instead of `%dx' due to `l' > suffix > /tmp/ccThIalZ.s:1948: Warning: using `%ecx' instead of `%cx' due to `l' > suffix > /tmp/ccThIalZ.s:1957: Warning: using `%edx' instead of `%dx' due to `l' > suffix > /tmp/ccThIalZ.s:1958: Warning: using `%edx' instead of `%dx' due to `l' > suffix > /tmp/ccThIalZ.s:1971: Warning: using `%edx' instead of `%dx' due to `l' > suffix > /tmp/ccThIalZ.s:1971: Warning: using `%edx' instead of `%dx' due to `l' > suffix > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -c -o traps.o traps.c > {standard input}: Assembler messages: > {standard input}:1492: Warning: using `%bx' instead of `%ebx' due to `w' > suffix > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -c -o irq.o irq.c > {standard input}: Assembler messages: > {standard input}:974: Warning: using `%edx' instead of `%dx' due to `l' > suffix > {standard input}:975: Warning: using `%edx' instead of `%dx' due to `l' > suffix > {standard input}:2114: Warning: using `%edx' instead of `%dx' due to `l' > suffix > {standard input}:2115: Warning: using `%edx' instead of `%dx' due to `l' > suffix > {standard input}:2134: Warning: using `%edx' instead of `%dx' due to `l' > suffix > {standard input}:2135: Warning: using `%edx' instead of `%dx' due to `l' > suffix > {standard input}:2154: Warning: using `%edx' instead of `%dx' due to `l' > suffix > {standard input}:2155: Warning: using `%edx' instead of `%dx' due to `l' > suffix > {standard input}:2174: Warning: using `%edx' instead of `%dx' due to `l' > suffix > {standard input}:2175: Warning: using `%edx' instead of `%dx' due to `l' > suffix > {standard input}:2194: Warning: using `%edx' instead of `%dx' due to `l' > suffix > {standard input}:2195: Warning: using `%edx' instead of `%dx' due to `l' > suffix > {standard input}:2214: Warning: using `%edx' instead of `%dx' due to `l' > suffix > {standard input}:2215: Warning: using `%edx' instead of `%dx' due to `l' > suffix > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -c -o vm86.o vm86.c > {standard input}: Assembler messages: > {standard input}:719: Warning: using `%eax' instead of `%ax' due to `l' > suffix > {standard input}:719: Warning: using `%eax' instead of `%ax' due to `l' > suffix > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -c -o ptrace.o ptrace.c > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -c -o ioport.o ioport.c > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -c -o ldt.o ldt.c > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -c -o setup.o setup.c > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -c -o time.o time.c > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -c -o sys_i386.o sys_i386.c > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -c -o bluesmoke.o bluesmoke.c > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -c -o bios32.o bios32.c > {standard input}: Assembler messages: > {standard input}:1118: Warning: indirect lcall without `*' > {standard input}:1203: Warning: indirect lcall without `*' > {standard input}:1284: Warning: indirect lcall without `*' > {standard input}:1321: Warning: indirect lcall without `*' > {standard input}:1350: Warning: indirect lcall without `*' > {standard input}:1379: Warning: indirect lcall without `*' > {standard input}:1408: Warning: indirect lcall without `*' > {standard input}:1436: Warning: indirect lcall without `*' > {standard input}:1464: Warning: indirect lcall without `*' > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -c -o mca.o mca.c > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -c -o smp.o smp.c > cc -D__KERNEL__ -I/usr/src/linux/include -D__ASSEMBLY__ -D__SMP__ -tradition > al -c trampoline.S -o trampoline.o > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -c -o io_apic.o io_apic.c > rm -f kernel.o > ld -m elf_i386 -r -o kernel.o i386_ksyms.o dmi_scan.o mtrr.o apm.o > process.o signal.o entry.o traps.o irq.o vm86.o ptrace.o ioport.o ldt.o > setup.o time.o sys_i386.o bluesmoke.o bios32.o mca.o smp.o trampoline.o > io_apic.o > cc -D__KERNEL__ -I/usr/src/linux/include -D__ASSEMBLY__ -D__SMP__ -tradition > al -c head.S -o head.o > /tmp/ccg7E50I.s: Assembler messages: > /tmp/ccg7E50I.s:1852: Warning: using `%eax' instead of `%ax' due to `l' > suffix > /tmp/ccg7E50I.s:1853: Warning: using `%eax' instead of `%ax' due to `l' > suffix > /tmp/ccg7E50I.s:1854: Warning: using `%eax' instead of `%ax' due to `l' > suffix > /tmp/ccg7E50I.s:1855: Warning: using `%eax' instead of `%ax' due to `l' > suffix > /tmp/ccg7E50I.s:2046: Warning: using `%eax' instead of `%ax' due to `l' > suffix > /tmp/ccg7E50I.s:2047: Warning: using `%eax' instead of `%ax' due to `l' > suffix > /tmp/ccg7E50I.s:2048: Warning: using `%eax' instead of `%ax' due to `l' > suffix > /tmp/ccg7E50I.s:2049: Warning: using `%eax' instead of `%ax' due to `l' > suffix > /tmp/ccg7E50I.s:2129: Warning: using `%eax' instead of `%ax' due to `l' > suffix > /tmp/ccg7E50I.s:2130: Warning: using `%eax' instead of `%ax' due to `l' > suffix > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -c -o init_task.o init_task.c > make[2]: Leaving directory `/usr/src/kernel-source-2.2.20/arch/i386/kernel' > make -C arch/i386/mm > make[2]: Entering directory `/usr/src/kernel-source-2.2.20/arch/i386/mm' > make all_targets > make[3]: Entering directory `/usr/src/kernel-source-2.2.20/arch/i386/mm' > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -c -o init.o init.c > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -c -o fault.o fault.c > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -c -o ioremap.o ioremap.c > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -c -o extable.o extable.c > rm -f mm.o > ld -m elf_i386 -r -o mm.o init.o fault.o ioremap.o extable.o > make[3]: Leaving directory `/usr/src/kernel-source-2.2.20/arch/i386/mm' > make[2]: Leaving directory `/usr/src/kernel-source-2.2.20/arch/i386/mm' > make -C arch/i386/lib > make[2]: Entering directory `/usr/src/kernel-source-2.2.20/arch/i386/lib' > make all_targets > make[3]: Entering directory `/usr/src/kernel-source-2.2.20/arch/i386/lib' > cc -D__KERNEL__ -I/usr/src/linux/include -D__ASSEMBLY__ -D__SMP__ -c > checksum.S -o checksum.o > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -c -o old-checksum.o > old-checksum.c > cc -D__KERNEL__ -I/usr/src/linux/include -D__ASSEMBLY__ -D__SMP__ -c > semaphore.S -o semaphore.o > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -c -o delay.o delay.c > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -c -o usercopy.o usercopy.c > cc -D__KERNEL__ -I/usr/src/linux/include -D__ASSEMBLY__ -D__SMP__ -c > getuser.S -o getuser.o > cc -D__KERNEL__ -I/usr/src/linux/include -D__ASSEMBLY__ -D__SMP__ -c > putuser.S -o putuser.o > rm -f lib.a > ar rcs lib.a checksum.o old-checksum.o semaphore.o delay.o usercopy.o > getuser.o putuser.o > make[3]: Leaving directory `/usr/src/kernel-source-2.2.20/arch/i386/lib' > make[2]: Leaving directory `/usr/src/kernel-source-2.2.20/arch/i386/lib' > make -C arch/i386/math-emu > make[2]: Entering directory > `/usr/src/kernel-source-2.2.20/arch/i386/math-emu' > make all_targets > make[3]: Entering directory > `/usr/src/kernel-source-2.2.20/arch/i386/math-emu' > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -DPARANOID -fno-builtin -DPARAN > OID -fno-builtin -c -o fpu_entry.o fpu_entry.c > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -DPARANOID -fno-builtin -DPARAN > OID -fno-builtin -c -o errors.o errors.c > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -DPARANOID -fno-builtin -DPARAN > OID -fno-builtin -c -o fpu_arith.o fpu_arith.c > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -DPARANOID -fno-builtin -DPARAN > OID -fno-builtin -c -o fpu_aux.o fpu_aux.c > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -DPARANOID -fno-builtin -DPARAN > OID -fno-builtin -c -o fpu_etc.o fpu_etc.c > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -DPARANOID -fno-builtin -DPARAN > OID -fno-builtin -c -o fpu_tags.o fpu_tags.c > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -DPARANOID -fno-builtin -DPARAN > OID -fno-builtin -c -o fpu_trig.o fpu_trig.c > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -DPARANOID -fno-builtin -DPARAN > OID -fno-builtin -c -o load_store.o load_store.c > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -DPARANOID -fno-builtin -DPARAN > OID -fno-builtin -c -o get_address.o get_address.c > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -DPARANOID -fno-builtin -DPARAN > OID -fno-builtin -c -o poly_atan.o poly_atan.c > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -DPARANOID -fno-builtin -DPARAN > OID -fno-builtin -c -o poly_l2.o poly_l2.c > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -DPARANOID -fno-builtin -DPARAN > OID -fno-builtin -c -o poly_2xm1.o poly_2xm1.c > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -DPARANOID -fno-builtin -DPARAN > OID -fno-builtin -c -o poly_sin.o poly_sin.c > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -DPARANOID -fno-builtin -DPARAN > OID -fno-builtin -c -o poly_tan.o poly_tan.c > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -DPARANOID -fno-builtin -DPARAN > OID -fno-builtin -c -o reg_add_sub.o reg_add_sub.c > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -DPARANOID -fno-builtin -DPARAN > OID -fno-builtin -c -o reg_compare.o reg_compare.c > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -DPARANOID -fno-builtin -DPARAN > OID -fno-builtin -c -o reg_constant.o reg_constant.c > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -DPARANOID -fno-builtin -DPARAN > OID -fno-builtin -c -o reg_convert.o reg_convert.c > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -DPARANOID -fno-builtin -DPARAN > OID -fno-builtin -c -o reg_ld_str.o reg_ld_str.c > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -DPARANOID -fno-builtin -DPARAN > OID -fno-builtin -c -o reg_divide.o reg_divide.c > cc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomi > t-frame-pointer -fno-strict-aliasing -D__SMP__ -pipe -fno-strength-reduce -m > preferred-stack-boundary=2 -m386 -DCPU=386 -DPARANOID -fno-builtin -DPARAN > OID -fno-builtin -c -o reg_mul.o reg_mul.c > cc -D__KERNEL__ -I/usr/src/linux/include -D__ASSEMBLY__ -DPARANOID -c > reg_u_add.S > cc -D__KERNEL__ -I/usr/src/linux/include -D__ASSEMBLY__ -DPARANOID -c > reg_u_div.S > cc -D__KERNEL__ -I/usr/src/linux/include -D__ASSEMBLY__ -DPARANOID -c > reg_u_mul.S > cc -D__KERNEL__ -I/usr/src/linux/include -D__ASSEMBLY__ -DPARANOID -c > reg_u_sub.S > cc -D__KERNEL__ -I/usr/src/linux/include -D__ASSEMBLY__ -DPARANOID -c > div_small.S > cc -D__KERNEL__ -I/usr/src/linux/include -D__ASSEMBLY__ -DPARANOID -c > reg_norm.S > cc -D__KERNEL__ -I/usr/src/linux/include -D__ASSEMBLY__ -DPARANOID -c > reg_round.S > cc -D__KERNEL__ -I/usr/src/linux/include -D__ASSEMBLY__ -DPARANOID -c > wm_shrx.S > cc -D__KERNEL__ -I/usr/src/linux/include -D__ASSEMBLY__ -DPARANOID -c > wm_sqrt.S > cc -D__KERNEL__ -I/usr/src/linux/include -D__ASSEMBLY__ -DPARANOID -c > div_Xsig.S > cc -D__KERNEL__ -I/usr/src/linux/include -D__ASSEMBLY__ -DPARANOID -c > polynom_Xsig.S > cc -D__KERNEL__ -I/usr/src/linux/include -D__ASSEMBLY__ -DPARANOID -c > round_Xsig.S > cc -D__KERNEL__ -I/usr/src/linux/include -D__ASSEMBLY__ -DPARANOID -c > shr_Xsig.S > cc -D__KERNEL__ -I/usr/src/linux/include -D__ASSEMBLY__ -DPARANOID -c > mul_Xsig.S > rm -f math.a > ar rcs math.a fpu_entry.o errors.o fpu_arith.o fpu_aux.o fpu_etc.o > fpu_tags.o fpu_trig.o load_store.o get_address.o poly_atan.o poly_l2.o > poly_2xm1.o poly_sin.o poly_tan.o reg_add_sub.o reg_compare.o reg_constant.o > reg_convert.o reg_ld_str.o reg_divide.o reg_mul.o reg_u_add.o reg_u_div.o > reg_u_mul.o reg_u_sub.o div_small.o reg_norm.o reg_round.o wm_shrx.o > wm_sqrt.o div_Xsig.o polynom_Xsig.o round_Xsig.o shr_Xsig.o mul_Xsig.o > make[3]: Leaving directory > `/usr/src/kernel-source-2.2.20/arch/i386/math-emu' > make[2]: Leaving directory > `/usr/src/kernel-source-2.2.20/arch/i386/math-emu' > cc -D__KERNEL__ -I/usr/src/linux/include -E -C -P -I/usr/src/linux/include - > imacros /usr/src/linux/include/asm-i386/page_offset.h -Ui386 > arch/i386/vmlinux.lds.S >arch/i386/vmlinux.lds > ld -m elf_i386 -T /usr/src/linux/arch/i386/vmlinux.lds -e stext > arch/i386/kernel/head.o arch/i386/kernel/init_task.o init/main.o > init/version.o \ > --start-group \ > arch/i386/kernel/kernel.o arch/i386/mm/mm.o kernel/kernel.o mm/mm.o > fs/fs.o ipc/ipc.o \ > fs/filesystems.a \ > net/network.a \ > drivers/block/block.a drivers/char/char.o drivers/misc/misc.a > drivers/net/net.a drivers/scsi/scsi.a drivers/cdrom/cdrom.a > drivers/pci/pci.a drivers/net/fc/fc.a drivers/pnp/pnp.a > drivers/video/video.a drivers/net/hamradio/hamradio.a > arch/i386/math-emu/math.a \ > /usr/src/linux/arch/i386/lib/lib.a /usr/src/linux/lib/lib.a > /usr/src/linux/arch/i386/lib/lib.a \ > --end-group \ > -o vmlinux > nm vmlinux | grep -v '\(compiled\)\|\(\.o$\)\|\( [aU] > \)\|\(\.\.ng$\)\|\(LASH[RL]DI\)' | sort > System.map > make[2]: Entering directory `/usr/src/kernel-source-2.2.20/arch/i386/boot' > cc -D__KERNEL__ -I/usr/src/linux/include -E -D__BIG_KERNEL__ -traditional -D > SVGA_MODE=NORMAL_VGA bootsect.S -o bbootsect.s > as86 -0 -a -o bbootsect.o bbootsect.s > ld86 -0 -s -o bbootsect bbootsect.o > cc -D__KERNEL__ -I/usr/src/linux/include -E -D__BIG_KERNEL__ -traditional -D > SVGA_MODE=NORMAL_VGA setup.S -o bsetup.s > as86 -0 -a -o bsetup.o bsetup.s > 01720 > | can be used for heap purposes. > 01720 > | can be used for heap purposes. > ld86 -0 -s -o bsetup bsetup.o > make[3]: Entering directory > `/usr/src/kernel-source-2.2.20/arch/i386/boot/compressed' > tmppiggy=_tmp_$$piggy; \ > rm -f $tmppiggy $tmppiggy.gz $tmppiggy.lnk; \ > objcopy -O binary -R .note -R .comment -S /usr/src/linux/vmlinux $tmppiggy; > \ > gzip -f -9 < $tmppiggy > $tmppiggy.gz; \ > echo "SECTIONS { .data : { input_len = .; LONG(input_data_end - input_data) > input_data = .; *(.data) input_data_end = .; }}" > $tmppiggy.lnk; \ > ld -m elf_i386 -m elf_i386 -r -o piggy.o -b binary $tmppiggy.gz -b > elf32-i386 -T $tmppiggy.lnk; \ > rm -f $tmppiggy $tmppiggy.gz $tmppiggy.lnk > cc -D__KERNEL__ -I/usr/src/linux/include -D__SMP__ -traditional -c head.S > /tmp/ccu8ZSKP.s: Assembler messages: > /tmp/ccu8ZSKP.s:109: Warning: using `%eax' instead of `%ax' due to `l' > suffix > /tmp/ccu8ZSKP.s:110: Warning: using `%eax' instead of `%ax' due to `l' > suffix > /tmp/ccu8ZSKP.s:111: Warning: using `%eax' instead of `%ax' due to `l' > suffix > /tmp/ccu8ZSKP.s:112: Warning: using `%eax' instead of `%ax' due to `l' > suffix > cc -D__KERNEL__ -I/usr/src/linux/include -O2 -DSTDC_HEADERS -c -o misc.o > misc.c > ld -m elf_i386 -Ttext 0x100000 -e startup_32 -o bvmlinux head.o misc.o > piggy.o > make[3]: Leaving directory > `/usr/src/kernel-source-2.2.20/arch/i386/boot/compressed' > gcc -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -o tools/build > tools/build.c -I/usr/src/linux/include > objcopy -O binary -R .note -R .comment -S compressed/bvmlinux > compressed/bvmlinux.out > tools/build -b bbootsect bsetup compressed/bvmlinux.out CURRENT > bzImage > Root device is (8, 3) > Boot sector 512 bytes. > Setup is 3656 bytes. > System is 1094 kB > System is too big. Try using modules. > make[2]: *** [bzImage] Error 1 > make[2]: Leaving directory `/usr/src/kernel-source-2.2.20/arch/i386/boot' > make[1]: *** [bzImage] Error 2 > make[1]: Leaving directory `/usr/src/kernel-source-2.2.20' > make: *** [stamp-build] Error 2 > debian:/usr/src/linux#
-- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)
