# $Id: pnpdump.c,v 1.21 1999/12/09 22:28:33 fox Exp $
# Release isapnptools-1.21 (library isapnptools-1.21)
# 
# This is free software, see the sources for details.
# This software has NO WARRANTY, use at your OWN RISK
# 
# For details of the output file format, see isapnp.conf(5)
# 
# For latest information and FAQ on isapnp and pnpdump see:
# http://www.roestock.demon.co.uk/isapnptools/
# 
# Compiler flags:  -DREALTIME -DNEEDSETSCHEDULER -DABORT_ONRESERR
# (for   library:  -DREALTIME -DNEEDSETSCHEDULER -DABORT_ONRESERR)
# 
# Trying port address 0273
# Board 1 has serial identifier a8 00 53 95 ca 60 00 d0 41

# (DEBUG)
(READPORT 0x0273)
(ISOLATE PRESERVE)
(IDENTIFY *)
(VERBOSITY 2)
(CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING

# Card 1: (serial identifier a8 00 53 95 ca 60 00 d0 41)
# Vendor Id PNP0060, Serial Number 5477834, checksum 0xA8.
# Version 1.0, Vendor version 1.0
# ANSI string -->NE2000 PLUG & PLAY ETHERNET CARD<--
#
# Logical device id @@@9519
#     Device supports I/O range check register
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE PNP0060/5477834 (LD 0
#     Compatible device id PNP80d6
#     Logical device decodes 10 bit IO address lines
#         Minimum IO base address 0x0200
#         Maximum IO base address 0x03e0
#         IO base alignment 32 bytes
#         Number of IO addresses required: 32
# (IO 0 (SIZE 32) (BASE 0x0200) (CHECK))
#     IRQ 3, 4, 5, 9, 10, 11, 12 or 15.
#         High true, edge sensitive interrupt
# (INT 0 (IRQ 3 (MODE +E)))
 (NAME "PNP0060/5477834[0]{NE2000 PLUG & PLAY ETHERNET CARD}")
# (ACT Y)
))
# End tag... Checksum 0x00 (OK)

# Returns all cards to the "Wait for Key" state
(WAITFORKEY)
