Ok,
thank you for pointing me into the right direction.
The working solution is the following entry in /etc/network/interfaces:
[...]
allow-ovs br0
iface br0 inet manual
allow-ovs [ccwdev0-encif]
iface [ccwdev0-encif]
pre-up znetconf -a [ccwdev0] -o layer2=1 -o bridge_role=primary
[...]
This way both interfaces come up as soon as I am starting open vswitch
('systemctl start openvswitch-switch').
I did not manage to set bridge_role in the post-up, since it is already
online at that point of time.
I had also no success with changes in /etc/sysconfig/scripts/
hardware/hwup-ccw-group.
Do you know if 'chzdev' will be in future s390-tools in stretch?
2017-04-25 15:10 GMT+02:00 Viktor Mihajlovski <[email protected]>:
> On 25.04.2017 13:44, Benjamin Jakob Zimmermann wrote:
> > Hello,
> > I am using debian stretch and I am trying to have openvswitch to work
> right
> > after rebooting the machine.
> >
> > So far, I manually configure the card with znetconf and then start
> > openvswitch and then manually bring up the interfaces.
> >
> > To visualize my approach, I list the commands (bridge and port had
> already
> > been added to ovs beforehand):
> > # znetconf -a [ccwdev0] -o layer2=1 -o bridge_role=primary
> > # systemctl start openvswitch-switch
> > # ip l s [ccwdev0] up
> > # ip l s br0 up
> >
> > Everything works out fine, I can now live migrate vm's via virsh.
> >
> > What options do I have to add to
> > /etc/sysconfig/hardware/config-ccw-0.0.[ccwdev0] to set the bridge_role
> > when the interface is brought up?
> >
> > Best,
> > Benjamin.
> >
> Hi,
>
> I fear there's no out-of-the box support for the bridge_role property in
> sysconfig-hardware. As a temporary circumvention you could apply the
> following change in /etc/sysconfig/scripts/hardware/hwup-ccw-group:
>
> 1. locate the line containing
> write_setting "portno" "$QETH_PORTNO'
> 2. insert the following line
> write_setting "bridge_role" "$QETH_BRIDGE_ROLE'
>
> Then you can add
> QETH_BRIDGE_ROLE=primary
> to the config file.
>
> Needless to say that this will not survive a package update. You might
> be better served by setting the property in a post-up command for the
> interface.
>
> I am not really sure whether it makes sense to add more properties to
> the sysconfig handling because in the long run persistent CCW device
> configurations should be done using chzdev, see
> https://www.ibm.com/developerworks/linux/linux390/s390-tools-1.33.0.html#
> newtools
> On the other hand, this will probably not happen for stretch :-(.
>
> --
>
> Mit freundlichen Grüßen/Kind Regards
> Viktor Mihajlovski
>
> IBM Deutschland Research & Development GmbH
> Vorsitzender des Aufsichtsrats: Martina Köderitz
> Geschäftsführung: Dirk Wittkopp
> Sitz der Gesellschaft: Böblingen
> Registergericht: Amtsgericht Stuttgart, HRB 243294
>
>
