Hello Guys,
I have something to go up automatically an interface OSA from Guest Lan
Hipersocket, in Debian on System z.
I changed /etc/network/interfaces and put the IP configuration of the new
interface (hsi0). It also created the file
/etc/sysconfig/hardware/config-ccw-0.0.0800 with the addresses of the
device and interface name.
Ex:
CCWGROUP_CHANS=(0.0.0800 0.0.0801 0.0.0802)
INTERFACE_NAME=(hsi0)
When I give lsqeth command, the device appears, but no device name:
Device name :
---------------------------------------------
card_type : HiperSockets
cdev0 : 0.0.0800
cdev1 : 0.0.0801
cdev2 : 0.0.0802
chpid : 00
online : 0
portname : no portname required
portno : 0
route4 : no
route6 : no
checksumming : sw checksumming
state : DOWN
priority_queueing : always queue 2
fake_ll : 0
fake_broadcast : 0
buffer_count : 16
add_hhlen : 0
layer2 : 0
large_send : no
I tried to search for something on the interface that already "up"
automatically, but did not find anything significant. I wonder if anyone
has solved this problem.
I know I can put a clause in the pre-up /etc/network/interfaces and a
script with "echo 1> /sys/devices/qeth/0.0.0800/online", but I would like
to know if there is one less way to do this craft.
Thanks,
Best Regards,
Fernando Gieseler
___________________________________
Technical Sales Specialist for System z
- Linux and z/VM -
IBM Brasil
fone: +55-51-2131-5848
cel: +55-51-9988-8177
fax: +55-51-2131-5875
ITN: 5 759-5848
T/L: 859-5848
[EMAIL PROTECTED]
