Package: wnpp
Severity: wishlist
Owner: Carsten Schoenert <c.schoen...@t-online.de>
* Package name : ponyprog
Version : 3.0.0~rc0
Upstream Author : Claudio Lanconelli <claudiolancone...@gmail.com>
Eduard Kalinowski <eduard_kalinow...@yahoo.de>
* URL : https://github.com/lancos/ponyprog
* License : GPL-2+, LGPL-2.1
Programming Lang: C++,
Description : Serial device programmer
PonyProg is a serial device programmer software with a user friendly
GUI framework available for Windows and Linux. Its purpose is reading
and writing every serial device. With PonyProg and SI-Prog you can
program Wafercard for SAT, eeprom within GSM, TV or CAR-RADIO.
Furthermore it can be used as a low cost starter kit for PIC and AVR.
.
PonyProg supports AVR, SPI eeprom, AVR micro, 12C bus 8bit eeprom, PIC
16 micro, PIC 12 micro, AT89S micro and SDE2506 eeprom family chips.
.
You can open any HEX, e2p, mot, csm, rom, eep, bin files and burn them
to uC or PIC. You can even backup the old program on the chip using
Ponyprog. Ponyprog enables the user to write, verify and erase data on
the microchip.
.
Set fuse bits and locks using PonyProg. You can save any HEX file to
BIN file or eep file,BIN file to HEX file or MOT file and vice versa so
you can use Ponyprog as converter too. PonyProg offers serial or
parallel port programming for uC's. You can even change polarity of
control lines without touching the wires using I/O port setup.
.
Using Ponyprog together with generic USB2serial adapters is currently
not possible! There are plans by upstream to use libusb to add such
functionality.
This package will be maintained within the Debian Electronics team.
Co-maintainers are welcome!
Regards
Carsten
