Op do, 01-06-2006 te 22:29 +0200, schreef martin f krafft: > also sprach martin f krafft <[EMAIL PROTECTED]> [2006.06.01.2150 +0200]: > > Stopping RAID devices... md6 busy; md5 busy; md3 busy; md2 busy; md0 > > busy; md1 busy; failed (6 busy, 1 stopped). > > Starting RAID devices... md0 running; md1 running; md2 running; md3 > > running; md4 started (3/3); md5 running; md6 running; done (6 > > running, 1 started, 0 failed). > > > > Which do people prefer? Btw: I cannot yet log which ones have been > > stopped, there's no easy way to find out with only POSIX and without > > /usr/bin/*. > > Here's the other version: > > piper:~# /etc/init.d/mdadm-raid restart > [575] > Stopping RAID array md6...failed (busy). > Stopping RAID array md5...failed (busy). > Stopping RAID array md0...failed (busy). > Stopping RAID array md1...failed (busy). > Stopping RAID arrays...done (3 array(s) stopped). > Starting RAID array md0...done (already running). > Starting RAID array md1...done (already running). > Starting RAID array md2...failed (not enough devices). > Starting RAID array md3...done (started, degraded [2/3]). > Starting RAID array md4...done (started [3/3]). > Starting RAID array md5...done (already running). > Starting RAID array md6...done (already running). Seems ok to me. This way all boot messages look consistent.
It would be nice if the log_action_end_msg would support warnings in addition to succes and failures, so the output would clearly distinguish a degraded array from a completely succesfully started array. Greetings Arjan
signature.asc
Description: Dit berichtdeel is digitaal ondertekend
