Stephan A. Suerken <[EMAIL PROTECTED]> (Fri Sep 29 15:21:56 2006): > Joshua Rodman <[EMAIL PROTECTED]> (Sun Sep 10 14:06:46 2006):
(...) >> Symptoms: >> >> uae-x brings up the configuration screen without problem. When the >> system is "unpaused", the classic amiga grey screens begin to appear, >> but then instead of completing and shifting to the rom-controlled boot >> screen, the screen goes black, the "power light" flashes, and the amiga >> system restarts. >> >> Running any older version of uae, or a self built uae from rdrummond >> sources does not produce this problem. > > (...) I have retested that it works perfectly fine on my amd64/etch system (w/ both kick 1.3 and 2.1). I have also done some new tests on (two different) i386 systems, and they actually do not boot both Kickstart I possesss. I.e. neither 1.3 nor 2.1, albeit the symptons are somewhat different than described by Joshua -- the screen just stays "the classic amiga grey screen". uae's output is the same as w/ an successfull kickstart boot: Found 0 joystick(s) Testing the RDTSC instruction ... done. Calibrating delay loop.. ok - 181.07 BogoMIPS Found 0 joystick(s) No disk in drive 0. Building CPU table for configuration: 68020 1866 CPU functions Building CPU function table (2 0). Using 24 bit visual, 32 bits per pixel Using normal image buffer. Using PAL timing Any helpful information on this issue is welcome ;). MfG, Stephan -- Stephan A Suerken <[EMAIL PROTECTED]> -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
