Control: tags -1 + patch Here is a patch to fix it.
diff --git a/debian/linuxcnc-uspace-dev.install b/debian/linuxcnc-uspace-dev.install index b7f6d14..199dae9 100644 --- a/debian/linuxcnc-uspace-dev.install +++ b/debian/linuxcnc-uspace-dev.install @@ -5,5 +5,3 @@ usr/lib/liblinuxcnc.a usr/lib/*.so usr/share/linuxcnc/Makefile.modinc usr/share/linuxcnc/mesa_modbus.c.tmpl -usr/share/man/man1/halcompile.1 -usr/share/man/man3 diff --git a/debian/linuxcnc-uspace-dev.manpages b/debian/linuxcnc-uspace-dev.manpages new file mode 100644 index 0000000..1186966 --- /dev/null +++ b/debian/linuxcnc-uspace-dev.manpages @@ -0,0 +1 @@ +usr/share/man/man3/* diff --git a/debian/linuxcnc-uspace.install b/debian/linuxcnc-uspace.install index acd44f5..55afb46 100644 --- a/debian/linuxcnc-uspace.install +++ b/debian/linuxcnc-uspace.install @@ -144,112 +144,6 @@ usr/share/linuxcnc/touchy.glade usr/share/locale -#usr/share/man/man1/5axisgui.1 -#usr/share/man/man1/axis.1 -#usr/share/man/man1/axis-remote.1 -#usr/share/man/man1/debuglevel.1 -#usr/share/man/man1/elbpcom.1 -#usr/share/man/man1/gladevcp.1 -#usr/share/man/man1/gladevcp_demo.1 -#usr/share/man/man1/gmoccapy.1 -#usr/share/man/man1/gremlin_view.1 -#usr/share/man/man1/gs2_vfd.1 -#usr/share/man/man1/gscreen.1 -#usr/share/man/man1/halcmd.1 -#usr/share/man/man1/halcmd_twopass.1 -#usr/share/man/man1/hal-histogram.1 -#usr/share/man/man1/hal_input.1 -#usr/share/man/man1/hal_manualtoolchange.1 -#usr/share/man/man1/halmeter.1 -#usr/share/man/man1/hal_parport.1 -#usr/share/man/man1/halreport.1 -#usr/share/man/man1/halrmt.1 -#usr/share/man/man1/halrun.1 -#usr/share/man/man1/halsampler.1 -#usr/share/man/man1/halscope.1 -#usr/share/man/man1/halshow.1 -#usr/share/man/man1/halstreamer.1 -#usr/share/man/man1/haltcl.1 -#usr/share/man/man1/halui.1 -#usr/share/man/man1/hbmgui.1 -#usr/share/man/man1/hexagui.1 -#usr/share/man/man1/hy_gt_vfd.1 -#usr/share/man/man1/hy_vfd.1 -#usr/share/man/man1/image-to-gcode.1 -#usr/share/man/man1/inivar.1 -#usr/share/man/man1/io.1 -#usr/share/man/man1/iocontrol.1 -#usr/share/man/man1/iov2.1 -#usr/share/man/man1/latency-histogram.1 -#usr/share/man/man1/latency-plot.1 -#usr/share/man/man1/latency-test.1 -#usr/share/man/man1/lineardelta.1 -#usr/share/man/man1/linuxcnc.1 -#usr/share/man/man1/linuxcnc_info.1 -#usr/share/man/man1/linuxcnclcd.1 -#usr/share/man/man1/linuxcncmkdesktop.1 -#usr/share/man/man1/linuxcnc_module_helper.1 -#usr/share/man/man1/linuxcncrsh.1 -#usr/share/man/man1/linuxcncsvr.1 -#usr/share/man/man1/linuxcnctop.1 -##usr/share/man/man1/linuxcnc_var.1 -#usr/share/man/man1/maho600gui.1 -#usr/share/man/man1/max5gui.1 -#usr/share/man/man1/mb2hal.1 -#usr/share/man/man1/mdi.1 -#usr/share/man/man1/mdro.1 -#usr/share/man/man1/milltask.1 -#usr/share/man/man1/mitsub_vfd.1 -#usr/share/man/man1/monitor-xhc-hb04.1 -#usr/share/man/man1/motion-logger.1 -#usr/share/man/man1/moveoff_gui.1 -#usr/share/man/man1/mqtt-publisher.1 -#usr/share/man/man1/ngcgui.1 -#usr/share/man/man1/panelui.1 -#usr/share/man/man1/pi500_vfd.1 -#usr/share/man/man1/pmx485.1 -#usr/share/man/man1/pmx485-test.1 -#usr/share/man/man1/pncconf.1 -#usr/share/man/man1/puma560gui.1 -#usr/share/man/man1/pumagui.1 -#usr/share/man/man1/pyngcgui.1 -#usr/share/man/man1/pyui.1 -#usr/share/man/man1/pyvcp.1 -#usr/share/man/man1/pyvcp_demo.1 -#usr/share/man/man1/qtplasmac-cfg2prefs.1 -#usr/share/man/man1/qtplasmac-materials.1 -#usr/share/man/man1/qtplasmac-plasmac2qt.1 -#usr/share/man/man1/qtplasmac-setup.1 -#usr/share/man/man1/qtvcp.1 -#usr/share/man/man1/rotarydelta.1 -#usr/share/man/man1/rs274.1 -#usr/share/man/man1/rtapi_app.1 -#usr/share/man/man1/scaragui.1 -#usr/share/man/man1/schedrmt.1 -#usr/share/man/man1/scorbot-er-3.1 -#usr/share/man/man1/sendkeys.1 -#usr/share/man/man1/shuttle.1 -#usr/share/man/man1/sim_pin.1 -#usr/share/man/man1/sim-torch.1 -#usr/share/man/man1/simulate_probe.1 -#usr/share/man/man1/stepconf.1 -#usr/share/man/man1/svd-ps_vfd.1 -#usr/share/man/man1/teach-in.1 -#usr/share/man/man1/thermistor.1 -#usr/share/man/man1/tooledit.1 -#usr/share/man/man1/touchy.1 -#usr/share/man/man1/update_ini.1 -#usr/share/man/man1/vfdb_vfd.1 -#usr/share/man/man1/vfs11_vfd.1 -#usr/share/man/man1/wj200_vfd.1 -#usr/share/man/man1/xhc-hb04.1 -#usr/share/man/man1/xhc-hb04-accels.1 -#usr/share/man/man1/xhc-whb04b-6.1 -#usr/share/man/man1/xyzac-trt-gui.1 -#usr/share/man/man1/xyzbc-trt-gui.1 - -#usr/share/man/man9 - usr/share/qtvcp src/emc/usr_intf/axis/etc usr/share/doc/linuxcnc-uspace/axis diff --git a/debian/linuxcnc-uspace.manpages b/debian/linuxcnc-uspace.manpages index 61c7f01..7ffb473 100644 --- a/debian/linuxcnc-uspace.manpages +++ b/debian/linuxcnc-uspace.manpages @@ -1,3 +1,2 @@ usr/share/man/man1/* -usr/share/man/man3/* usr/share/man/man9/* -- Happy hacking Petter Reinholdtsen
