Bug#1068770: marked as done (linux-image-6.1.0-18-amd64: Local privilege escalation vulnerability in kernel n_gsm driver)

Mon, 15 Apr 2024 14:51:48 -0700 

Your message dated Mon, 15 Apr 2024 21:47:22 +0000
with message-id <e1rwuac-0068mz...@fasolo.debian.org>
and subject line Bug#1068770: fixed in linux 6.1.85-1
has caused the Debian Bug report #1068770,
regarding linux-image-6.1.0-18-amd64: Local privilege escalation vulnerability 
in kernel n_gsm driver
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)


-- 
1068770: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1068770
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message --- 
Package: src:linux
Version: 6.1.76-1
Severity: critical
Tags: upstream security
Justification: root security hole
X-Debbugs-Cc: lw-deb-...@greyskydesigns.com, Debian Security Team 
<t...@security.debian.org>

Dear Maintainer,

A Reddit thread[1] linked to a Github page[2] with a local root escalation 
exploit.  This exploit works on the current "bookworm" stable kernel, 
6.1.0-18-amd64.

It can be worked around by blocking the n_gsm driver:

echo 'blacklist n_gsm' | sudo tee -a /etc/modprobe.d/blacklist-gsm.conf
sudo rmmod n_gsm


[1] https://old.reddit.com/r/linux/comments/1c0i7tx/someone_found_a_kernel_0day/
[2] https://github.com/YuriiCrimson/ExploitGSM/


-- Package-specific info:
** Version:
Linux version 6.1.0-18-amd64 (debian-ker...@lists.debian.org) (gcc-12 (Debian 
12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP 
PREEMPT_DYNAMIC Debian 6.1.76-1 (2024-02-01)

** Command line:
BOOT_IMAGE=/@rootfs/boot/vmlinuz-6.1.0-18-amd64 root=UUID=403bad0f-[snip] ro 
rootflags=subvol=@rootfs panic=5

** Not tainted

** Kernel log:
[    2.783100] at24 0-0051: supply vcc not found, using dummy regulator
[    2.784137] at24 0-0051: 256 byte spd EEPROM, read-only
[    2.789726] usb 2-1.3: FTDI USB Serial Device converter now attached to 
ttyUSB1
[    2.806774] ipmi_si: IPMI System Interface driver
[    2.810971] usbcore: registered new interface driver usbhid
[    2.811095] usbhid: USB HID core driver
[    2.811363] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS
[    2.811489] ipmi_platform: ipmi_si: SMBIOS: io 0xca8 regsize 1 spacing 1 irq 0
[    2.811630] ipmi_si: Adding SMBIOS-specified kcs state machine
[    2.811813] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI
[    2.812069] ipmi_si IPI0001:00: ipmi_platform: [io  0x0ca8] regsize 1 
spacing 4 irq 0
[    2.818248] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state 
machine in favor of ACPI
[    2.818400] ipmi_si: Adding ACPI-specified kcs state machine
[    2.818581] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 
0xca8, slave address 0x20, irq 0
[    2.825415] input: American Megatrends Inc. Virtual Keyboard and Mouse as 
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/0003:046B:FF10.0001/input/input3
[    2.832623] hid-generic 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 
Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on 
usb-0000:00:1a.0-1.5.1/input0
[    2.832950] input: American Megatrends Inc. Virtual Keyboard and Mouse as 
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.1/0003:046B:FF10.0002/input/input4
[    2.834908] hid-generic 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 
Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on 
usb-0000:00:1a.0-1.5.1/input1
[    2.842988] ast 0000:0a:00.0: vgaarb: deactivate vga console
[    2.844608] Console: switching to colour dummy device 80x25
[    2.846274] ast 0000:0a:00.0: [drm] Using P2A bridge for configuration
[    2.846281] ast 0000:0a:00.0: [drm] AST 1100 detected
[    2.846293] ast 0000:0a:00.0: [drm] Using analog VGA
[    2.846303] ast 0000:0a:00.0: [drm] dram MCLK=204 Mhz type=0 bus_width=16
[    2.850155] [drm] Initialized ast 0.1.0 20120228 for 0000:0a:00.0 on minor 0
[    2.855445] fbcon: astdrmfb (fb0) is primary device
[    2.896398] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 
0x0019fd, prod_id: 0x1588, dev_id: 0x20)
[    2.956975] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms 
ovfl timer
[    2.956979] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    2.956980] RAPL PMU: hw unit of domain package 2^-16 Joules
[    2.962273] cfg80211: Loading compiled-in X.509 certificates for regulatory 
database
[    2.962515] cfg80211: Loaded X.509 cert 'b...@debian.org: 
577e021cb980e0e820821ba7b54b4961b8b4fadf'
[    2.962782] cfg80211: Loaded X.509 cert 'romain.per...@gmail.com: 
3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[    2.963083] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    2.963382] cfg80211: Loaded X.509 cert 'wens: 
61c038651aabdcf94bd0ac7ff06c7248db18c600'
[    2.964803] platform regulatory.0: firmware: direct-loading firmware 
regulatory.db
[    2.964836] platform regulatory.0: firmware: direct-loading firmware 
regulatory.db.p7s
[    2.965857] cryptd: max_cpu_qlen set to 1000
[    2.968485] Console: switching to colour frame buffer device 128x48
[    2.970095] ast 0000:0a:00.0: [drm] fb0: astdrmfb frame buffer device
[    2.985684] AVX version of gcm_enc/dec engaged.
[    2.985759] AES CTR mode by8 optimization enabled
[    3.011119] ipmi_si IPI0001:00: IPMI kcs interface initialized
[    3.015582] ipmi_ssif: IPMI SSIF Interface driver
[    3.171484] bond1: (slave enp6s0): Enslaving as a backup interface with a 
down link
[    3.190106] random: crng init done
[    3.315374] bond1: (slave enp5s0): Enslaving as a backup interface with a 
down link
[    3.377310] intel_rapl_common: Found RAPL domain package
[    3.377890] intel_rapl_common: Found RAPL domain core
[    3.378493] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[    5.683251] e1000e 0000:05:00.0 enp5s0: NIC Link is Up 1000 Mbps Full 
Duplex, Flow Control: Rx/Tx
[    5.766280] bond1: (slave enp5s0): link status definitely up, 1000 Mbps full 
duplex
[    5.766973] bond1: Warning: No 802.3ad response from the link partner for 
any adapters in the bond
[    5.767694] bond1: active interface up!
[    5.798612] IPv6: ADDRCONF(NETDEV_CHANGE): bond1: link becomes ready
[    5.800582] e1000e 0000:06:00.0 enp6s0: NIC Link is Up 1000 Mbps Full 
Duplex, Flow Control: Rx/Tx
[    5.870300] bond1: (slave enp6s0): link status definitely up, 1000 Mbps full 
duplex

** Model information
sys_vendor: empty
product_name: empty
product_version: empty
chassis_vendor: empty
chassis_version: empty
bios_vendor: American Megatrends Inc.
bios_version: V1.02
board_vendor: TYAN 
board_name: empty
board_version: empty

** Loaded modules:
xt_cgroup
intel_rapl_msr
intel_rapl_common
x86_pkg_temp_thermal
intel_powerclamp
coretemp
kvm_intel
kvm
irqbypass
ghash_clmulni_intel
sha512_ssse3
sha512_generic
sha256_ssse3
sha1_ssse3
bonding
ipmi_ssif
tls
aesni_intel
crypto_simd
cryptd
cfg80211
rapl
joydev
ast
drm_vram_helper
hid_generic
drm_ttm_helper
ttm
acpi_ipmi
intel_cstate
rfkill
at24
usbhid
iTCO_wdt
drm_kms_helper
ipmi_si
ftdi_sio
intel_uncore
evdev
pcspkr
intel_pmc_bxt
hid
iTCO_vendor_support
ipmi_devintf
watchdog
i2c_algo_bit
usbserial
ipmi_msghandler
ie31200_edac
sg
button
nfnetlink
binfmt_misc
drm
fuse
dm_mod
loop
efi_pstore
configfs
ip_tables
x_tables
autofs4
btrfs
blake2b_generic
xor
raid6_pq
zstd_compress
libcrc32c
crc32c_generic
sd_mod
t10_pi
crc64_rocksoft
crc64
crc_t10dif
crct10dif_generic
ahci
libahci
libata
ehci_pci
ehci_hcd
crct10dif_pclmul
crct10dif_common
scsi_mod
crc32_pclmul
usbcore
crc32c_intel
e1000e
i2c_i801
i2c_smbus
scsi_common
lpc_ich
usb_common

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 Processor Family 
DRAM Controller [8086:0108] (rev 09)
        Subsystem: Intel Corporation Xeon E3-1200 Processor Family DRAM 
Controller [8086:0108]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        IOMMU group: 0
        Capabilities: [e0] Vendor Specific Information: Len=0c <?>
        Kernel driver in use: ie31200_edac
        Kernel modules: ie31200_edac

00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core 
Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal 
decode])
        Subsystem: Intel Corporation Xeon E3-1200/2nd Generation Core Processor 
Family PCI Express Root Port [8086:0101]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 25
        IOMMU group: 1
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: [disabled] [16-bit]
        Memory behind bridge: [disabled] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [88] Subsystem: Intel Corporation Xeon E3-1200/2nd 
Generation Core Processor Family PCI Express Root Port [8086:0101]
        Capabilities: [80] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee00218  Data: 0000
        Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0
                        ExtTag- RBE+
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- 
TransPend-
                LnkCap: Port #2, Speed 5GT/s, Width x8, ASPM L0s L1, Exit 
Latency L0s <1us, L1 <4us
                        ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x0
                        TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
Surprise-
                        Slot #0, PowerLimit 0W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- 
Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- 
Interlock-
                        Changed: MRL- PresDet- LinkState-
                RootCap: CRSVisible-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ 
CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis- 
NROPrPrP- LTR+
                         10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- 
EETLPPrefix-
                         EmergencyPowerReduction Not Supported, 
EmergencyPowerReductionInit-
                         FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- 
ARIFwd-
                         AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 
10BitTagReq- OBFF Disabled, ARIFwd-
                         AtomicOpsCtl: ReqEn- EgressBlck-
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                         Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB 
preshoot
                LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- 
EqualizationPhase1-
                         EqualizationPhase2- EqualizationPhase3- 
LinkEqualizationRequest-
                         Retimer- 2Retimers- CrosslinkRes: unsupported
        Capabilities: [100 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
                        Status: NegoPending+ InProgress-
        Capabilities: [140 v1] Root Complex Link
                Desc:   PortNumber=02 ComponentID=01 EltType=Config
                Link0:  Desc:   TargetPort=00 TargetComponent=01 AssocRCRB- 
LinkType=MemMapped LinkValid+
                        Addr:   00000000fed19000
        Kernel driver in use: pcieport

00:01.1 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core 
Processor Family PCI Express Root Port [8086:0105] (rev 09) (prog-if 00 [Normal 
decode])
        Subsystem: Intel Corporation Xeon E3-1200/2nd Generation Core Processor 
Family PCI Express Root Port [8086:0105]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 26
        IOMMU group: 1
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: [disabled] [16-bit]
        Memory behind bridge: [disabled] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [88] Subsystem: Intel Corporation Xeon E3-1200/2nd 
Generation Core Processor Family PCI Express Root Port [8086:0105]
        Capabilities: [80] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee00238  Data: 0000
        Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0
                        ExtTag- RBE+
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- 
TransPend-
                LnkCap: Port #3, Speed 5GT/s, Width x8, ASPM L0s L1, Exit 
Latency L0s <1us, L1 <4us
                        ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled+ CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x0
                        TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
Surprise-
                        Slot #0, PowerLimit 0W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- 
Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- 
Interlock-
                        Changed: MRL- PresDet- LinkState-
                RootCap: CRSVisible-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ 
CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis- 
NROPrPrP- LTR+
                         10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- 
EETLPPrefix-
                         EmergencyPowerReduction Not Supported, 
EmergencyPowerReductionInit-
                         FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- 
ARIFwd-
                         AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 
10BitTagReq- OBFF Disabled, ARIFwd-
                         AtomicOpsCtl: ReqEn- EgressBlck-
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                         Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB 
preshoot
                LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- 
EqualizationPhase1-
                         EqualizationPhase2- EqualizationPhase3- 
LinkEqualizationRequest-
                         Retimer- 2Retimers- CrosslinkRes: unsupported
        Capabilities: [100 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
                        Status: NegoPending+ InProgress-
        Capabilities: [140 v1] Root Complex Link
                Desc:   PortNumber=03 ComponentID=01 EltType=Config
                Link0:  Desc:   TargetPort=00 TargetComponent=01 AssocRCRB- 
LinkType=MemMapped LinkValid+
                        Addr:   00000000fed19000
        Kernel driver in use: pcieport

00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset 
Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI])
        Subsystem: Intel Corporation 6 Series/C200 Series Chipset Family USB 
Enhanced Host Controller [8086:1c2d]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        IOMMU group: 2
        Region 0: Memory at fbd03000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Debug port: BAR=1 offset=00a0
        Capabilities: [98] PCI Advanced Features
                AFCap: TP+ FLR+
                AFCtrl: FLR-
                AFStatus: TP-
        Kernel driver in use: ehci-pci
        Kernel modules: ehci_pci

00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset 
Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode])
        Subsystem: Intel Corporation 6 Series/C200 Series Chipset Family PCI 
Express Root Port 1 [8086:1c10]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 27
        IOMMU group: 3
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: e000-efff [size=4K] [16-bit]
        Memory behind bridge: fbc00000-fbcfffff [size=1M] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0
                        ExtTag- RBE+
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ 
TransPend-
                LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Exit 
Latency L0s <512ns, L1 <4us
                        ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1
                        TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
Surprise-
                        Slot #0, PowerLimit 10W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- 
Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ 
Interlock-
                        Changed: MRL- PresDet- LinkState+
                RootCap: CRSVisible-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ 
CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Range BC, TimeoutDis+ NROPrPrP- 
LTR-
                         10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- 
EETLPPrefix-
                         EmergencyPowerReduction Not Supported, 
EmergencyPowerReductionInit-
                         FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- 
ARIFwd-
                         AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 
10BitTagReq- OBFF Disabled, ARIFwd-
                         AtomicOpsCtl: ReqEn- EgressBlck-
                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                         Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB 
preshoot
                LnkSta2: Current De-emphasis Level: -3.5dB, 
EqualizationComplete- EqualizationPhase1-
                         EqualizationPhase2- EqualizationPhase3- 
LinkEqualizationRequest-
                         Retimer- 2Retimers- CrosslinkRes: unsupported
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee00278  Data: 0000
        Capabilities: [90] Subsystem: Intel Corporation 6 Series/C200 Series 
Chipset Family PCI Express Root Port 1 [8086:1c10]
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset 
Family PCI Express Root Port 2 [8086:1c12] (rev b5) (prog-if 00 [Normal decode])
        Subsystem: Intel Corporation 6 Series/C200 Series Chipset Family PCI 
Express Root Port 2 [8086:1c12]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 28
        IOMMU group: 4
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        I/O behind bridge: d000-dfff [size=4K] [16-bit]
        Memory behind bridge: fbb00000-fbbfffff [size=1M] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0
                        ExtTag- RBE+
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ 
TransPend-
                LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Exit 
Latency L0s <512ns, L1 <4us
                        ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1
                        TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
Surprise-
                        Slot #1, PowerLimit 10W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- 
Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ 
Interlock-
                        Changed: MRL- PresDet- LinkState+
                RootCap: CRSVisible-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ 
CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Range BC, TimeoutDis+ NROPrPrP- 
LTR-
                         10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- 
EETLPPrefix-
                         EmergencyPowerReduction Not Supported, 
EmergencyPowerReductionInit-
                         FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- 
ARIFwd-
                         AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 
10BitTagReq- OBFF Disabled, ARIFwd-
                         AtomicOpsCtl: ReqEn- EgressBlck-
                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                         Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB 
preshoot
                LnkSta2: Current De-emphasis Level: -3.5dB, 
EqualizationComplete- EqualizationPhase1-
                         EqualizationPhase2- EqualizationPhase3- 
LinkEqualizationRequest-
                         Retimer- 2Retimers- CrosslinkRes: unsupported
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee00298  Data: 0000
        Capabilities: [90] Subsystem: Intel Corporation 6 Series/C200 Series 
Chipset Family PCI Express Root Port 2 [8086:1c12]
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset 
Family PCI Express Root Port 3 [8086:1c14] (rev b5) (prog-if 00 [Normal decode])
        Subsystem: Intel Corporation 6 Series/C200 Series Chipset Family PCI 
Express Root Port 3 [8086:1c14]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin C routed to IRQ 29
        IOMMU group: 5
        Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
        I/O behind bridge: c000-cfff [size=4K] [16-bit]
        Memory behind bridge: fba00000-fbafffff [size=1M] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0
                        ExtTag- RBE+
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ 
TransPend-
                LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Exit 
Latency L0s <512ns, L1 <4us
                        ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1
                        TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
Surprise-
                        Slot #2, PowerLimit 10W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- 
Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ 
Interlock-
                        Changed: MRL- PresDet- LinkState+
                RootCap: CRSVisible-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ 
CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Range BC, TimeoutDis+ NROPrPrP- 
LTR-
                         10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- 
EETLPPrefix-
                         EmergencyPowerReduction Not Supported, 
EmergencyPowerReductionInit-
                         FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- 
ARIFwd-
                         AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 
10BitTagReq- OBFF Disabled, ARIFwd-
                         AtomicOpsCtl: ReqEn- EgressBlck-
                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                         Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB 
preshoot
                LnkSta2: Current De-emphasis Level: -3.5dB, 
EqualizationComplete- EqualizationPhase1-
                         EqualizationPhase2- EqualizationPhase3- 
LinkEqualizationRequest-
                         Retimer- 2Retimers- CrosslinkRes: unsupported
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee002d8  Data: 0000
        Capabilities: [90] Subsystem: Intel Corporation 6 Series/C200 Series 
Chipset Family PCI Express Root Port 3 [8086:1c14]
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset 
Family PCI Express Root Port 4 [8086:1c16] (rev b5) (prog-if 00 [Normal decode])
        Subsystem: Intel Corporation 6 Series/C200 Series Chipset Family PCI 
Express Root Port 4 [8086:1c16]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin D routed to IRQ 30
        IOMMU group: 6
        Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
        I/O behind bridge: b000-bfff [size=4K] [16-bit]
        Memory behind bridge: fb900000-fb9fffff [size=1M] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0
                        ExtTag- RBE+
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ 
TransPend-
                LnkCap: Port #4, Speed 5GT/s, Width x1, ASPM L0s L1, Exit 
Latency L0s <512ns, L1 <4us
                        ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1
                        TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
Surprise-
                        Slot #3, PowerLimit 10W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- 
Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ 
Interlock-
                        Changed: MRL- PresDet- LinkState+
                RootCap: CRSVisible-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ 
CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Range BC, TimeoutDis+ NROPrPrP- 
LTR-
                         10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- 
EETLPPrefix-
                         EmergencyPowerReduction Not Supported, 
EmergencyPowerReductionInit-
                         FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- 
ARIFwd-
                         AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 
10BitTagReq- OBFF Disabled, ARIFwd-
                         AtomicOpsCtl: ReqEn- EgressBlck-
                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                         Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB 
preshoot
                LnkSta2: Current De-emphasis Level: -3.5dB, 
EqualizationComplete- EqualizationPhase1-
                         EqualizationPhase2- EqualizationPhase3- 
LinkEqualizationRequest-
                         Retimer- 2Retimers- CrosslinkRes: unsupported
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee00318  Data: 0000
        Capabilities: [90] Subsystem: Intel Corporation 6 Series/C200 Series 
Chipset Family PCI Express Root Port 4 [8086:1c16]
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset 
Family PCI Express Root Port 5 [8086:1c18] (rev b5) (prog-if 00 [Normal decode])
        Subsystem: Intel Corporation 6 Series/C200 Series Chipset Family PCI 
Express Root Port 5 [8086:1c18]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 31
        IOMMU group: 7
        Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
        I/O behind bridge: [disabled] [16-bit]
        Memory behind bridge: [disabled] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0
                        ExtTag- RBE+
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ 
TransPend-
                LnkCap: Port #5, Speed 5GT/s, Width x1, ASPM L0s L1, Exit 
Latency L0s <1us, L1 <4us
                        ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x0
                        TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
Surprise-
                        Slot #4, PowerLimit 10W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- 
Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- 
Interlock-
                        Changed: MRL- PresDet- LinkState-
                RootCap: CRSVisible-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ 
CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Range BC, TimeoutDis+ NROPrPrP- 
LTR-
                         10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- 
EETLPPrefix-
                         EmergencyPowerReduction Not Supported, 
EmergencyPowerReductionInit-
                         FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- 
ARIFwd-
                         AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 
10BitTagReq- OBFF Disabled, ARIFwd-
                         AtomicOpsCtl: ReqEn- EgressBlck-
                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                         Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB 
preshoot
                LnkSta2: Current De-emphasis Level: -3.5dB, 
EqualizationComplete- EqualizationPhase1-
                         EqualizationPhase2- EqualizationPhase3- 
LinkEqualizationRequest-
                         Retimer- 2Retimers- CrosslinkRes: unsupported
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee00338  Data: 0000
        Capabilities: [90] Subsystem: Intel Corporation 6 Series/C200 Series 
Chipset Family PCI Express Root Port 5 [8086:1c18]
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: pcieport

00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset 
Family PCI Express Root Port 6 [8086:1c1a] (rev b5) (prog-if 00 [Normal decode])
        Subsystem: Intel Corporation 6 Series/C200 Series Chipset Family PCI 
Express Root Port 6 [8086:1c1a]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 32
        IOMMU group: 8
        Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
        I/O behind bridge: [disabled] [16-bit]
        Memory behind bridge: [disabled] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0
                        ExtTag- RBE+
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ 
TransPend-
                LnkCap: Port #6, Speed 5GT/s, Width x1, ASPM L0s L1, Exit 
Latency L0s <1us, L1 <4us
                        ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x0
                        TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
Surprise-
                        Slot #5, PowerLimit 10W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- 
Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- 
Interlock-
                        Changed: MRL- PresDet- LinkState-
                RootCap: CRSVisible-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ 
CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Range BC, TimeoutDis+ NROPrPrP- 
LTR-
                         10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- 
EETLPPrefix-
                         EmergencyPowerReduction Not Supported, 
EmergencyPowerReductionInit-
                         FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- 
ARIFwd-
                         AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 
10BitTagReq- OBFF Disabled, ARIFwd-
                         AtomicOpsCtl: ReqEn- EgressBlck-
                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                         Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB 
preshoot
                LnkSta2: Current De-emphasis Level: -3.5dB, 
EqualizationComplete- EqualizationPhase1-
                         EqualizationPhase2- EqualizationPhase3- 
LinkEqualizationRequest-
                         Retimer- 2Retimers- CrosslinkRes: unsupported
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee00358  Data: 0000
        Capabilities: [90] Subsystem: Intel Corporation 6 Series/C200 Series 
Chipset Family PCI Express Root Port 6 [8086:1c1a]
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: pcieport

00:1c.6 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset 
Family PCI Express Root Port 7 [8086:1c1c] (rev b5) (prog-if 00 [Normal decode])
        Subsystem: Intel Corporation 6 Series/C200 Series Chipset Family PCI 
Express Root Port 7 [8086:1c1c]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin C routed to IRQ 33
        IOMMU group: 9
        Bus: primary=00, secondary=09, subordinate=0a, sec-latency=0
        I/O behind bridge: a000-afff [size=4K] [16-bit]
        Memory behind bridge: fb000000-fb8fffff [size=9M] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0
                        ExtTag- RBE+
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ 
TransPend-
                LnkCap: Port #7, Speed 5GT/s, Width x1, ASPM L0s L1, Exit 
Latency L0s <512ns, L1 <4us
                        ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1
                        TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
Surprise-
                        Slot #6, PowerLimit 10W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- 
Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ 
Interlock-
                        Changed: MRL- PresDet- LinkState+
                RootCap: CRSVisible-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ 
CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Range BC, TimeoutDis+ NROPrPrP- 
LTR-
                         10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- 
EETLPPrefix-
                         EmergencyPowerReduction Not Supported, 
EmergencyPowerReductionInit-
                         FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- 
ARIFwd-
                         AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 
10BitTagReq- OBFF Disabled, ARIFwd-
                         AtomicOpsCtl: ReqEn- EgressBlck-
                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                         Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB 
preshoot
                LnkSta2: Current De-emphasis Level: -3.5dB, 
EqualizationComplete- EqualizationPhase1-
                         EqualizationPhase2- EqualizationPhase3- 
LinkEqualizationRequest-
                         Retimer- 2Retimers- CrosslinkRes: unsupported
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee00378  Data: 0000
        Capabilities: [90] Subsystem: Intel Corporation 6 Series/C200 Series 
Chipset Family PCI Express Root Port 7 [8086:1c1c]
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset 
Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI])
        Subsystem: Intel Corporation 6 Series/C200 Series Chipset Family USB 
Enhanced Host Controller [8086:1c26]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        IOMMU group: 10
        Region 0: Memory at fbd02000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Debug port: BAR=1 offset=00a0
        Capabilities: [98] PCI Advanced Features
                AFCap: TP+ FLR+
                AFCtrl: FLR-
                AFStatus: TP-
        Kernel driver in use: ehci-pci
        Kernel modules: ehci_pci

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 
a5) (prog-if 01 [Subtractive decode])
        Subsystem: Intel Corporation 82801 PCI Bridge [8086:244e]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        IOMMU group: 11
        Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=32
        I/O behind bridge: [disabled] [16-bit]
        Memory behind bridge: [disabled] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [50] Subsystem: Intel Corporation 82801 PCI Bridge 
[8086:244e]

00:1f.0 ISA bridge [0601]: Intel Corporation C204 Chipset LPC Controller 
[8086:1c54] (rev 05)
        Subsystem: Intel Corporation C204 Chipset LPC Controller [8086:1c54]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        IOMMU group: 12
        Capabilities: [e0] Vendor Specific Information: Len=0c <?>
        Kernel driver in use: lpc_ich
        Kernel modules: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset 
Family 6 port Desktop SATA AHCI Controller [8086:1c02] (rev 05) (prog-if 01 
[AHCI 1.0])
        Subsystem: Intel Corporation 6 Series/C200 Series Chipset Family 6 port 
Desktop SATA AHCI Controller [8086:1c02]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 37
        IOMMU group: 12
        Region 0: I/O ports at f070 [size=8]
        Region 1: I/O ports at f060 [size=4]
        Region 2: I/O ports at f050 [size=8]
        Region 3: I/O ports at f040 [size=4]
        Region 4: I/O ports at f020 [size=32]
        Region 5: Memory at fbd01000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee003f8  Data: 0000
        Capabilities: [70] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot+,D3cold-)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
        Capabilities: [b0] PCI Advanced Features
                AFCap: TP+ FLR+
                AFCtrl: FLR-
                AFStatus: TP-
        Kernel driver in use: ahci
        Kernel modules: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family 
SMBus Controller [8086:1c22] (rev 05)
        Subsystem: Intel Corporation 6 Series/C200 Series Chipset Family SMBus 
Controller [8086:1c22]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin C routed to IRQ 18
        IOMMU group: 12
        Region 0: Memory at fbd00000 (64-bit, non-prefetchable) [size=256]
        Region 4: I/O ports at f000 [size=32]
        Kernel driver in use: i801_smbus
        Kernel modules: i2c_i801

03:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network 
Connection [8086:10d3]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        IOMMU group: 13
        Region 0: Memory at fbc00000 (32-bit, non-prefetchable) [size=128K]
        Region 2: I/O ports at e000 [size=32]
        Region 3: Memory at fbc20000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [c8] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
        Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [e0] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, 
L1 <64us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- 
SlotPowerLimit 0W
                DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ 
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM not supported
                        ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1
                        TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        Capabilities: [a0] MSI-X: Enable+ Count=5 Masked-
                Vector table: BAR=3 offset=00000000
                PBA: BAR=3 offset=00002000
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- 
AdvNonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- 
AdvNonFatalErr+
                AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- 
ECRCChkCap- ECRCChkEn-
                        MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
                HeaderLog: 00000000 00000000 00000000 00000000
        Kernel driver in use: e1000e
        Kernel modules: e1000e

04:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network 
Connection [8086:10d3]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 17
        IOMMU group: 14
        Region 0: Memory at fbb00000 (32-bit, non-prefetchable) [size=128K]
        Region 2: I/O ports at d000 [size=32]
        Region 3: Memory at fbb20000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [c8] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
        Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [e0] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, 
L1 <64us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- 
SlotPowerLimit 0W
                DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ 
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM not supported
                        ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1
                        TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        Capabilities: [a0] MSI-X: Enable+ Count=5 Masked-
                Vector table: BAR=3 offset=00000000
                PBA: BAR=3 offset=00002000
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- 
AdvNonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- 
AdvNonFatalErr+
                AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- 
ECRCChkCap- ECRCChkEn-
                        MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
                HeaderLog: 00000000 00000000 00000000 00000000
        Kernel driver in use: e1000e
        Kernel modules: e1000e

05:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network 
Connection [8086:10d3]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 18
        IOMMU group: 15
        Region 0: Memory at fba00000 (32-bit, non-prefetchable) [size=128K]
        Region 2: I/O ports at c000 [size=32]
        Region 3: Memory at fba20000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [c8] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
        Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [e0] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, 
L1 <64us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- 
SlotPowerLimit 0W
                DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ 
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM not supported
                        ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1
                        TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        Capabilities: [a0] MSI-X: Enable+ Count=5 Masked-
                Vector table: BAR=3 offset=00000000
                PBA: BAR=3 offset=00002000
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- 
AdvNonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- 
AdvNonFatalErr+
                AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- 
ECRCChkCap- ECRCChkEn-
                        MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
                HeaderLog: 00000000 00000000 00000000 00000000
        Kernel driver in use: e1000e
        Kernel modules: e1000e

06:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network 
Connection [8086:10d3]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 19
        IOMMU group: 16
        Region 0: Memory at fb900000 (32-bit, non-prefetchable) [size=128K]
        Region 2: I/O ports at b000 [size=32]
        Region 3: Memory at fb920000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [c8] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
        Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [e0] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, 
L1 <64us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- 
SlotPowerLimit 0W
                DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ 
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM not supported
                        ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1
                        TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        Capabilities: [a0] MSI-X: Enable+ Count=5 Masked-
                Vector table: BAR=3 offset=00000000
                PBA: BAR=3 offset=00002000
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- 
AdvNonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- 
AdvNonFatalErr+
                AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- 
ECRCChkCap- ECRCChkEn-
                        MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
                HeaderLog: 00000000 00000000 00000000 00000000
        Kernel driver in use: e1000e
        Kernel modules: e1000e

09:00.0 PCI bridge [0604]: ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge 
[1a03:1150] (rev 02) (prog-if 00 [Normal decode])
        Subsystem: ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge [1a03:1150]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 18
        IOMMU group: 17
        Bus: primary=09, secondary=0a, subordinate=0a, sec-latency=32
        I/O behind bridge: a000-afff [size=4K] [16-bit]
        Memory behind bridge: fb000000-fb8fffff [size=9M] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
        Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [78] Power Management version 3
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [80] Express (v1) PCI-Express to PCI/PCI-X Bridge, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ SlotPowerLimit 
10W
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ BrConfRtry-
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ 
TransPend-
                LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit 
Latency L0s <256ns, L1 <2us
                        ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1
                        TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        Capabilities: [a4] Subsystem: ASPEED Technology, Inc. AST1150 
PCI-to-PCI Bridge [1a03:1150]
        Capabilities: [100 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=01
                        Status: NegoPending- InProgress-

0a:00.0 VGA compatible controller [0300]: ASPEED Technology, Inc. ASPEED 
Graphics Family [1a03:2000] (rev 10) (prog-if 00 [VGA controller])
        Subsystem: ASPEED Technology, Inc. ASPEED Graphics Family [1a03:2000]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 18
        IOMMU group: 17
        Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=8M]
        Region 1: Memory at fb800000 (32-bit, non-prefetchable) [size=128K]
        Region 2: I/O ports at a000 [size=128]
        Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
        Capabilities: [40] Power Management version 3
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: ast
        Kernel modules: ast


** USB devices:
Bus 002 Device 005: ID 0403:6001 Future Technology Devices International, Ltd 
FT232 Serial (UART) IC
Bus 002 Device 004: ID 0403:6001 Future Technology Devices International, Ltd 
FT232 Serial (UART) IC
Bus 002 Device 003: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 046b:ff10 American Megatrends, Inc. Virtual Keyboard and 
Mouse
Bus 001 Device 003: ID 046b:ff01 American Megatrends, Inc. Generic Hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 12.5
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable-security'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 6.1.0-18-amd64 (SMP w/8 CPU threads; PREEMPT)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-6.1.0-18-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.142
ii  kmod                                    30+20221128-1
ii  linux-base                              4.9

Versions of packages linux-image-6.1.0-18-amd64 recommends:
ii  apparmor             3.0.8-3
ii  firmware-linux-free  20200122-1

Versions of packages linux-image-6.1.0-18-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.06-13+deb12u1
pn  linux-doc-6.1           <none>

Versions of packages linux-image-6.1.0-18-amd64 is related to:
pn  firmware-amd-graphics     <none>
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
pn  firmware-linux-nonfree    <none>
pn  firmware-misc-nonfree     <none>
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
pn  firmware-realtek          <none>
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information

--- End Message ---
--- Begin Message --- 
Source: linux
Source-Version: 6.1.85-1
Done: Salvatore Bonaccorso <car...@debian.org>

We believe that the bug you reported is fixed in the latest version of
linux, which is due to be installed in the Debian FTP archive.

A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 1068...@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Salvatore Bonaccorso <car...@debian.org> (supplier of updated linux package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmas...@ftp-master.debian.org)


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

Format: 1.8
Date: Thu, 11 Apr 2024 23:17:03 +0200
Source: linux
Architecture: source
Version: 6.1.85-1
Distribution: bookworm-security
Urgency: high
Maintainer: Debian Kernel Team <debian-ker...@lists.debian.org>
Changed-By: Salvatore Bonaccorso <car...@debian.org>
Closes: 1065320 1068675 1068770
Changes:
 linux (6.1.85-1) bookworm-security; urgency=high
 .
   * New upstream stable update:
     https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.83
     - md: fix data corruption for raid456 when reshape restart while grow up
     - md/raid10: prevent soft lockup while flush writes
     - io_uring/unix: drop usage of io_uring socket
     - io_uring: drop any code related to SCM_RIGHTS
     - nfsd: allow nfsd_file_get to sanely handle a NULL pointer
     - nfsd: don't open-code clear_and_wake_up_bit
     - nfsd: NFSD_FILE_KEY_INODE only needs to find GC'ed entries
     - nfsd: simplify test_bit return in NFSD_FILE_KEY_FULL comparator
     - nfsd: don't kill nfsd_files because of lease break error
     - nfsd: add some comments to nfsd_file_do_acquire
     - nfsd: don't take/put an extra reference when putting a file
     - nfsd: update comment over __nfsd_file_cache_purge
     - nfsd: allow reaping files still under writeback
     - NFSD: Convert filecache to rhltable
     - nfsd: simplify the delayed disposal list code
     - NFSD: Fix problem of COMMIT and NFS4ERR_DELAY in infinite loop
     - NFSD: Add an nfsd4_encode_nfstime4() helper
     - nfsd: Fix creation time serialization order
     - [arm64] media: rkisp1: Fix IRQ handling due to shared interrupts
     - perf/arm-cmn: Workaround AmpereOneX errata AC04_MESH_1 (incorrect child
       count)
     - ASoC: rt5645: Make LattePanda board DMI match more precise
     - [x86] ASoC: amd: yc: Fix non-functional mic on Lenovo 82UU
     - [x86] xen: Add some null pointer checking to smp.c
     - [mips*] Clear Cause.BD in instruction_pointer_set
     - HID: multitouch: Add required quirk for Synaptics 0xcddc device
     - gen_compile_commands: fix invalid escape sequence warning
     - [arm64] sve: Lower the maximum allocation for the SVE ptrace regset
     - soc: microchip: Fix POLARFIRE_SOC_SYS_CTRL input prompt
     - RDMA/mlx5: Fix fortify source warning while accessing Eth segment
     - RDMA/mlx5: Relax DEVX access upon modify commands
     - [x86] mm: Move is_vsyscall_vaddr() into asm/vsyscall.h
     - [x86] mm: Disallow vsyscall page read for copy_from_kernel_nofault()
     - net/iucv: fix the allocation size of iucv_path_table array
     - block: sed-opal: handle empty atoms when parsing response
     - dm-verity, dm-crypt: align "struct bvec_iter" correctly
     - [arm64] dts: Fix dtc interrupt_provider warnings
     - btrfs: fix data races when accessing the reserved amount of block 
reserves
     - btrfs: fix data race at btrfs_use_block_rsv() when accessing block 
reserve
     - net: smsc95xx: add support for SYS TEC USB-SPEmodule1
     - wifi: mac80211: only call drv_sta_rc_update for uploaded stations
     - [x86] ASoC: amd: yc: Add Lenovo ThinkBook 21J0 into DMI quirk table
     - scsi: mpt3sas: Prevent sending diag_reset when the controller is ready
     - ALSA: hda/realtek - ALC285 reduce pop noise from Headphone port
     - drm/amdgpu: Enable gpu reset for S3 abort cases on Raven series
     - [x86] ASoC: amd: yc: Fix non-functional mic on Lenovo 21J2
     - Bluetooth: mgmt: Fix limited discoverable off timeout
     - firewire: core: use long bus reset on gap count error
     - [arm64] tegra: Set the correct PHY mode for MGBE
     - [x86] ASoC: Intel: bytcr_rt5640: Add an extra entry for the Chuwi Vi8
       tablet
     - Input: gpio_keys_polled - suppress deferred probe error for gpio
     - [x86] ASoC: wm8962: Enable oscillator if selecting WM8962_FLL_OSC
     - [x86] ASoC: wm8962: Enable both SPKOUTR_ENA and SPKOUTL_ENA in mono mode
     - [x86] ASoC: wm8962: Fix up incorrect error message in wm8962_set_fll
     - do_sys_name_to_handle(): use kzalloc() to fix kernel-infoleak
     - fs: Fix rw_hint validation
     - [s390x] dasd: add autoquiesce feature
     - [s390x] dasd: Use dev_*() for device log messages
     - [s390x] dasd: fix double module refcount decrement
     - rcu/exp: Fix RCU expedited parallel grace period kworker allocation
       failure recovery
     - rcu/exp: Handle RCU expedited grace period kworker allocation failure
     - nbd: null check for nla_nest_start
     - fs/select: rework stack allocation hack for clang
     - md: Don't clear MD_CLOSING when the raid is about to stop
     - lib/cmdline: Fix an invalid format specifier in an assertion msg
     - lib: memcpy_kunit: Fix an invalid format specifier in an assertion msg
     - time: test: Fix incorrect format specifier
     - rtc: test: Fix invalid format specifier.
     - io_uring/net: unify how recvmsg and sendmsg copy in the msghdr
     - io_uring/net: move receive multishot out of the generic msghdr path
     - io_uring/net: fix overflow check in io_recvmsg_mshot_prep()
     - [x86] resctrl: Implement new mba_MBps throttling heuristic
     - [x86] sme: Fix memory encryption setting if enabled by default and not
       overridden
     - timekeeping: Fix cross-timestamp interpolation on counter wrap
     - timekeeping: Fix cross-timestamp interpolation corner case decision
     - timekeeping: Fix cross-timestamp interpolation for non-x86
     - sched/fair: Take the scheduling domain into account in select_idle_smt()
     - sched/fair: Take the scheduling domain into account in select_idle_core()
     - wifi: b43: Stop/wake correct queue in DMA Tx path when QoS is disabled
     - wifi: b43: Stop/wake correct queue in PIO Tx path when QoS is disabled
     - wifi: b43: Stop correct queue in DMA worker when QoS is disabled
     - wifi: b43: Disable QoS for bcm4331
     - wifi: wilc1000: fix declarations ordering
     - wifi: wilc1000: fix RCU usage in connect path
     - wifi: rtl8xxxu: add cancel_work_sync() for c2hcmd_work
     - wifi: wilc1000: do not realloc workqueue everytime an interface is added
     - wifi: wilc1000: fix multi-vif management when deleting a vif
     - wifi: mwifiex: debugfs: Drop unnecessary error check for
       debugfs_create_dir()
     - cpufreq: brcmstb-avs-cpufreq: add check for cpufreq_cpu_get's return 
value
     - cpufreq: Explicitly include correct DT includes
     - cpufreq: mediatek-hw: Wait for CPU supplies before probing
     - sock_diag: annotate data-races around sock_diag_handlers[family]
     - inet_diag: annotate data-races around inet_diag_table[]
     - bpftool: Silence build warning about calloc()
     - libbpf: Apply map_set_def_max_entries() for inner_maps on creation
     - af_unix: Annotate data-race of gc_in_progress in wait_for_unix_gc().
     - cpufreq: mediatek-hw: Don't error out if supply is not found
     - libbpf: Fix faccessat() usage on Android
     - pmdomain: qcom: rpmhpd: Drop SA8540P gfx.lvl
     - [arm64] dts: imx8mm-kontron: Disable pullups for I2C signals on OSM-S
       i.MX8MM
     - [arm64] dts: imx8mm-kontron: Disable pullups for I2C signals on SL/BL
       i.MX8MM
     - [arm64] dts: imx8mm-kontron: Disable pullups for onboard UART signals on
       BL OSM-S board
     - [arm64] dts: imx8mm-kontron: Disable pullups for onboard UART signals on
       BL board
     - [arm64] dts: imx8mm-kontron: Disable pull resistors for SD card signals 
on
       BL OSM-S board
     - [arm64] dts: imx8mm-kontron: Disable pull resistors for SD card signals 
on
       BL board
     - [arm64] dts: imx8mm-kontron: Fix interrupt for RTC on OSM-S i.MX8MM 
module
     - libbpf: Add missing LIBBPF_API annotation to libbpf_set_memlock_rlim API
     - wifi: ath9k: delay all of ath9k_wmi_event_tasklet() until init is 
complete
     - wifi: iwlwifi: mvm: report beacon protection failures
     - wifi: iwlwifi: dbg-tlv: ensure NUL termination
     - wifi: iwlwifi: fix EWRD table validity check
     - gpio: vf610: allow disabling the vf610 driver
     - [arm64] dts: imx8mm-venice-gw71xx: fix USB OTG VBUS
     - net: blackhole_dev: fix build warning for ethh set but not used
     - wifi: ath11k: initialize rx_mcs_80 and rx_mcs_160 before use
     - wifi: libertas: fix some memleaks in lbs_allocate_cmd_buffer()
     - wifi: wfx: fix memory leak when starting AP
     - printk: Disable passing console lock owner completely during panic()
     - pwm: sti: Fix capture for st,pwm-num-chan < st,capture-num-chan
     - tools/resolve_btfids: Refactor set sorting with types from btf_ids.h
     - tools/resolve_btfids: Fix cross-compilation to non-host endianness
     - wifi: iwlwifi: mvm: don't set replay counters to 0xff
     - [s390x] pai: fix attr_event_free upper limit for pai device drivers
     - [s390x] vdso: drop '-fPIC' from LDFLAGS
     - ipv6: mcast: remove one synchronize_net() barrier in ipv6_mc_down()
     - [arm64] dts: mt8183: kukui: Split out keyboard node and describe
       detachables
     - [arm64] dts: mt8183: Move CrosEC base detection node to kukui-based DTs
     - [arm64] dts: mediatek: mt7986: add "#reset-cells" to infracfg
     - [arm64] dts: mediatek: mt8192-asurada: Remove CrosEC base detection node
     - [arm64] dts: mediatek: mt8192: fix vencoder clock name
     - [arm64] dts: mediatek: mt7622: add missing "device_type" to memory nodes
     - bpf: Mark bpf_spin_{lock,unlock}() helpers with notrace correctly
     - wifi: wilc1000: prevent use-after-free on vif when cleaning up all
       interfaces
     - ACPI: processor_idle: Fix memory leak in acpi_processor_power_exit()
     - bus: tegra-aconnect: Update dependency to ARCH_TEGRA
     - [amd64] iommu/amd: Mark interrupt as managed
     - wifi: brcmsmac: avoid function pointer casts
     - [arm64] dts: qcom: sdm845-db845c: correct PCIe wake-gpios
     - [arm64] dts: qcom: sm8150: use 'gpios' suffix for PCI GPIOs
     - [arm64] dts: qcom: sm8150: correct PCIe wake-gpios
     - powercap: dtpm_cpu: Fix error check against freq_qos_add_request()
     - net: ena: Remove ena_select_queue
     - [arm64] dts: mt8195-cherry-tomato: change watchdog reset boot flow
     - firmware: arm_scmi: Fix double free in SMC transport cleanup path
     - wifi: wilc1000: revert reset line logic flip
     - net: mctp: copy skb ext data when fragmenting
     - pstore: inode: Convert mutex usage to guard(mutex)
     - pstore: inode: Only d_invalidate() is needed
     - [arm64] dts: allwinner: h6: Add RX DMA channel for SPDIF
     - ACPI: resource: Add Infinity laptops to irq1_edge_low_force_override
     - ACPI: resource: Do IRQ override on Lunnen Ground laptops
     - ACPI: resource: Add MAIBENBEN X577 to irq1_edge_low_force_override
     - ACPI: scan: Fix device check notification handling
     - [x86] relocs: Ignore relocations in .notes section (CVE-2024-26816)
     - SUNRPC: fix some memleaks in gssx_dec_option_array
     - mmc: wmt-sdmmc: remove an incorrect release_mem_region() call in the
       .remove function
     - ACPI: CPPC: enable AMD CPPC V2 support for family 17h processors
     - wifi: rtw88: 8821c: Fix beacon loss and disconnect
     - wifi: rtw88: 8821c: Fix false alarm count
     - PCI: Make pci_dev_is_disconnected() helper public for other drivers
     - [amd64] iommu/vt-d: Don't issue ATS Invalidation request when device is
       disconnected
     - igb: Fix missing time sync events
     - Bluetooth: Remove HCI_POWER_OFF_TIMEOUT
     - Bluetooth: mgmt: Remove leftover queuing of power_off work
     - Bluetooth: Remove superfluous call to hci_conn_check_pending()
     - Bluetooth: hci_qca: don't use IS_ERR_OR_NULL() with gpiod_get_optional()
     - Bluetooth: Cancel sync command before suspend and power off
     - Bluetooth: hci_sync: Only allow hci_cmd_sync_queue if running
     - Bluetooth: hci_conn: Consolidate code for aborting connections
     - Bluetooth: hci_core: Cancel request on command timeout
     - Bluetooth: hci_sync: Fix overwriting request callback
     - Bluetooth: hci_core: Fix possible buffer overflow
     - Bluetooth: af_bluetooth: Fix deadlock
     - Bluetooth: fix use-after-free in accessing skb after sending it
     - [s390x] cache: prevent rebuild of shared_cpu_list
     - bpf: Fix DEVMAP_HASH overflow check on 32-bit arches
     - bpf: Fix hashtab overflow check on 32-bit arches
     - bpf: Fix stackmap overflow check on 32-bit arches
     - [amd64] iommu/vt-d: Retrieve IOMMU perfmon capability information
     - ipv6: fib6_rules: flush route cache when rule is changed
     - net: ip_tunnel: make sure to pull inner header in ip_tunnel_rcv()
     - net: phy: fix phy_get_internal_delay accessing an empty array
     - [arm64] net: hns3: fix wrong judgment condition issue
     - [arm64] net: hns3: fix kernel crash when 1588 is received on HIP08 
devices
     - [arm64] net: hns3: fix port duplex configure error in IMP reset
     - Bluetooth: MGMT: Fix always using HCI_MAX_AD_LENGTH
     - Bluetooth: hci_core: Fix missing instances using HCI_MAX_AD_LENGTH
     - Bluetooth: Fix eir name length
     - net: phy: dp83822: Fix RGMII TX delay configuration
     - OPP: debugfs: Fix warning around icc_get_name()
     - tcp: fix incorrect parameter validation in the do_tcp_getsockopt()
       function
     - ipmr: fix incorrect parameter validation in the ip_mroute_getsockopt()
       function
     - l2tp: fix incorrect parameter validation in the pppol2tp_getsockopt()
       function
     - udp: fix incorrect parameter validation in the udp_lib_getsockopt()
       function
     - net: kcm: fix incorrect parameter validation in the kcm_getsockopt)
       function
     - nfp: flower: handle acti_netdevs allocation failure
     - bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes()
     - dm raid: fix false positive for requeue needed during reshape
     - dm: call the resume method on internal suspend
     - [arm64,armhf] drm/tegra: dsi: Add missing check for 
of_find_device_by_node
     - [arm64,armhf] drm/tegra: dpaux: Fix PM disable depth imbalance in
       tegra_dpaux_probe
     - [arm64,armhf] drm/tegra: dsi: Make use of the helper function
       dev_err_probe()
     - [arm64,armhf] drm/tegra: dsi: Fix some error handling paths in
       tegra_dsi_probe()
     - [arm64,armhf] drm/tegra: dsi: Fix missing pm_runtime_disable() in the
       error handling path of tegra_dsi_probe()
     - [arm64,armhf] drm/tegra: hdmi: Convert to 
devm_platform_ioremap_resource()
     - [arm64,armhf] drm/tegra: hdmi: Fix some error handling paths in
       tegra_hdmi_probe()
     - [arm64,armhf] drm/tegra: rgb: Fix some error handling paths in
       tegra_dc_rgb_probe()
     - [arm64,armhf] drm/tegra: rgb: Fix missing clk_put() in the error handling
       paths of tegra_dc_rgb_probe()
     - [arm64,armhf] drm/tegra: output: Fix missing i2c_put_adapter() in the
       error handling paths of tegra_output_probe()
     - drm: Don't treat 0 as -1 in drm_fixp2int_ceil
     - drm/vmwgfx: fix a memleak in vmw_gmrid_man_get_node
     - drm/panel-edp: use put_sync in unprepare
     - drm/lima: fix a memleak in lima_heap_alloc
     - [x86] ASoC: amd: acp: Add missing error handling in sof-mach
     - dmaengine: tegra210-adma: Update dependency to ARCH_TEGRA
     - media: tc358743: register v4l2 async device only after successful setup
     - PCI/DPC: Print all TLP Prefixes, not just the first
     - perf record: Fix possible incorrect free in record__switch_output()
     - HID: lenovo: Add middleclick_workaround sysfs knob for cptkbd
     - drm/amd/display: Fix a potential buffer overflow in
       'dp_dsc_clock_en_read()'
     - drm/amd/display: Fix potential NULL pointer dereferences in
       'dcn10_set_output_transfer_func()'
     - pinctrl: renesas: r8a779g0: Add Audio SSI pins, groups, and functions
     - pinctrl: renesas: r8a779g0: Add missing SCIF_CLK2 pin group/function
     - clk: samsung: exynos850: Propagate SPI IPCLK rate change
     - perf evsel: Fix duplicate initialization of data->id in
       evsel__parse_sample()
     - clk: meson: Add missing clocks to axg_clk_regmaps
     - media: em28xx: annotate unchecked call to media_device_register()
     - media: v4l2-tpg: fix some memleaks in tpg_alloc
     - media: v4l2-mem2mem: fix a memleak in v4l2_m2m_register_entity
     - media: edia: dvbdev: fix a use-after-free
     - clk: qcom: reset: Commonize the de/assert functions
     - clk: qcom: reset: Ensure write completion on reset de/assertion
     - quota: simplify drop_dquot_ref()
     - quota: Fix potential NULL pointer dereference
     - quota: Fix rcu annotations of inode dquot pointers
     - PCI: switchtec: Fix an error handling path in switchtec_pci_probe()
     - crypto: xilinx - call finalize with bh disabled
     - perf thread_map: Free strlist on normal path in
       thread_map__new_by_tid_str()
     - [arm64] drm/msm/dpu: fix the programming of INTF_CFG2_DATA_HCTL_EN
     - [arm64] drm/msm/dpu: Only enable DSC_MODE_MULTIPLEX if dsc_merge is
       enabled
     - drm/radeon/ni: Fix wrong firmware size logging in ni_init_microcode()
     - ALSA: seq: fix function cast warnings
     - perf stat: Avoid metric-only segv
     - [arm64,armhf] ASoC: meson: aiu: fix function pointer type mismatch
     - [arm64,armhf] ASoC: meson: t9015: fix function pointer type mismatch
     - [powerpc*] Force inlining of arch_vmap_p{u/m}d_supported()
     - [x86] ASoC: SOF: Introduce container struct for SOF firmware
     - [x86] ASoC: SOF: Add some bounds checking to firmware data
     - NTB: EPF: fix possible memory leak in pci_vntb_probe()
     - NTB: fix possible name leak in ntb_register_device()
     - media: cedrus: h265: Associate mv col buffers with buffer
     - media: cedrus: h265: Fix configuring bitstream size
     - media: sun8i-di: Fix coefficient writes
     - media: sun8i-di: Fix power on/off sequences
     - media: sun8i-di: Fix chroma difference threshold
     - media: imx: csc/scaler: fix v4l2_ctrl_handler memory leak
     - media: go7007: add check of return value of go7007_read_addr()
     - media: pvrusb2: remove redundant NULL check
     - media: pvrusb2: fix pvr2_stream_callback casts
     - clk: qcom: dispcc-sdm845: Adjust internal GDSC wait times
     - PCI: Mark 3ware-9650SE Root Port Extended Tags as broken
     - clk: hisilicon: hi3519: Release the correct number of gates in
       hi3519_clk_unregister()
     - clk: hisilicon: hi3559a: Fix an erroneous devm_kfree()
     - [arm64,armhf] drm/tegra: put drm_gem_object ref on error in
       tegra_fb_create
     - mfd: syscon: Call of_node_put() only when of_parse_phandle() takes a ref
     - mfd: altera-sysmgr: Call of_node_put() only when of_parse_phandle() takes
       a ref
     - crypto: jitter - fix CRYPTO_JITTERENTROPY help text
     - drm/tidss: Fix initial plane zpos values
     - drm/tidss: Fix sync-lost issue with two displays
     - mtd: maps: physmap-core: fix flash size larger than 32-bit
     - mtd: rawnand: lpc32xx_mlc: fix irq handler prototype
     - [arm64,armhf] ASoC: meson: axg-tdm-interface: fix mclk setup without
       mclk-fs
     - [arm64,armhf] ASoC: meson: axg-tdm-interface: add frame rate constraint
     - HID: amd_sfh: Update HPD sensor structure elements
     - HID: amd_sfh: Avoid disabling the interrupt
     - drm/amdgpu: Fix missing break in ATOM_ARG_IMM Case of atom_get_src_int()
     - media: pvrusb2: fix uaf in pvr2_context_set_notify
     - media: dvb-frontends: avoid stack overflow warnings with clang
     - media: go7007: fix a memleak in go7007_load_encoder
     - media: ttpci: fix two memleaks in budget_av_attach
     - media: mediatek: vcodec: avoid -Wcast-function-type-strict warning
     - gpio: nomadik: fix offset bug in nmk_pmx_set()
     - [powerpc*] pseries: Fix potential memleak in papr_get_attr()
     - [powerpc*] hv-gpci: Fix the H_GET_PERF_COUNTER_INFO hcall return value
       checks
     - [arm64] drm/msm/dpu: add division of drm_display_mode's hskew parameter
     - modules: wait do_free_init correctly
     - powerpc/embedded6xx: Fix no previous prototype for avr_uart_send() etc.
     - leds: aw2013: Unlock mutex before destroying it
     - leds: sgm3140: Add missing timer cleanup and flash gpio control
     - backlight: lm3630a: Initialize backlight_properties on init
     - backlight: lm3630a: Don't set bl->props.brightness in get_brightness
     - backlight: da9052: Fully initialize backlight_properties during probe
     - backlight: lm3639: Fully initialize backlight_properties during probe
     - backlight: lp8788: Fully initialize backlight_properties during probe
     - clk: Fix clk_core_get NULL dereference
     - clk: zynq: Prevent null pointer dereference caused by kmalloc failure
     - ALSA: hda/realtek: fix ALC285 issues on HP Envy x360 laptops
     - ALSA: usb-audio: Stop parsing channels bits when all channels are found.
     - RDMA/irdma: Allow accurate reporting on QP max send/recv WR
     - RDMA/irdma: Remove duplicate assignment
     - RDMA/srpt: Do not register event handler until srpt device is fully setup
     - f2fs: reduce stack memory cost by using bitfield in struct f2fs_io_info
     - f2fs: compress: fix to guarantee persisting compressed blocks by CP
     - f2fs: compress: fix to cover normal cluster write with cp_rwsem
     - f2fs: compress: fix to check unreleased compressed cluster
     - f2fs: simplify __allocate_data_block
     - f2fs: delete obsolete FI_FIRST_BLOCK_WRITTEN
     - f2fs: delete obsolete FI_DROP_CACHE
     - f2fs: introduce get_dnode_addr() to clean up codes
     - f2fs: update blkaddr in __set_data_blkaddr() for cleanup
     - f2fs: compress: fix to avoid inconsistence bewteen i_blocks and dnode
     - f2fs: compress: fix to cover f2fs_disable_compressed_file() w/ i_sem
     - f2fs: fix to avoid potential panic during recovery
     - scsi: csiostor: Avoid function pointer casts
     - [arm64] RDMA/hns: Fix mis-modifying default congestion control algorithm
     - RDMA/device: Fix a race between mad_client and cm_client init
     - RDMA/rtrs-clt: Check strnlen return len in sysfs mpath_policy_store()
     - scsi: bfa: Fix function pointer type mismatch for hcb_qe->cbfn
     - f2fs: compress: fix to check zstd compress level correctly in mount 
option
     - net: sunrpc: Fix an off by one in rpc_sockaddr2uaddr()
     - NFSv4.2: fix nfs4_listxattr kernel BUG at mm/usercopy.c:102
     - NFSv4.2: fix listxattr maximum XDR buffer size
     - f2fs: compress: fix to check compress flag w/ .i_sem lock
     - f2fs: check number of blocks in a current section
     - watchdog: stm32_iwdg: initialize default timeout
     - f2fs: ro: compress: fix to avoid caching unaligned extent
     - NFS: Fix an off by one in root_nfs_cat()
     - f2fs: convert to use sbi directly
     - f2fs: compress: relocate some judgments in f2fs_reserve_compress_blocks
     - f2fs: compress: fix reserve_cblocks counting error when out of space
     - [x86] perf/x86/amd/core: Avoid register reset when CPU is dead
     - afs: Revert "afs: Hide silly-rename files from userspace"
     - nfs: fix panic when nfs4_ff_layout_prepare_ds() fails
     - io_uring/net: correct the type of variable
     - comedi: comedi_test: Prevent timers rescheduling during deletion
     - [armhf] remoteproc: stm32: use correct format strings on 64-bit
     - [armhf] remoteproc: stm32: Fix incorrect type in assignment for va
     - [armhf] remoteproc: stm32: Fix incorrect type assignment returned by
       stm32_rproc_get_loaded_rsc_tablef
     - usb: phy: generic: Get the vbus supply
     - tty: vt: fix 20 vs 0x20 typo in EScsiignore
     - serial: max310x: fix syntax error in IRQ error message
     - tty: serial: samsung: fix tx_empty() to return TIOCSER_TEMT
     - [arm64] dts: broadcom: bcmbca: bcm4908: drop invalid switch cells
     - hwtracing: hisi_ptt: Move type check to the beginning of
       hisi_ptt_pmu_event_init()
     - rtc: mt6397: select IRQ_DOMAIN instead of depending on it
     - serial: 8250_exar: Don't remove GPIO device on suspend
     - staging: greybus: fix get_channel_from_mode() failure path
     - usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin
     - nouveau: reset the bo resource bus info after an eviction
     - tcp: Fix NEW_SYN_RECV handling in inet_twsk_purge()
     - rds: tcp: Fix use-after-free of net in reqsk_timer_handler().
     - [s390x] vtime: fix average steal time calculation
     - net/sched: taprio: proper TCA_TAPRIO_TC_ENTRY_INDEX check 
(CVE-2024-26815)
     - soc: fsl: dpio: fix kcalloc() argument order
     - tcp: Fix refcnt handling in __inet_hash_connect().
     - hsr: Fix uninit-value access in hsr_get_node()
     - nvme: only set reserved_tags in nvme_alloc_io_tag_set for fabrics
       controllers
     - nvme: add the Apple shared tag workaround to nvme_alloc_io_tag_set
     - nvme: fix reconnection fail due to reserved tag allocation
     - net: mediatek: mtk_eth_soc: clear MAC_MCR_FORCE_LINK only when MAC is up
     - net: ethernet: mtk_eth_soc: fix PPE hanging issue
     - packet: annotate data-races around ignore_outgoing
     - net: veth: do not manipulate GRO when using XDP
     - net: dsa: mt7530: prevent possible incorrect XTAL frequency selection
     - drm: Fix drm_fixp2int_round() making it add 0.5
     - vdpa_sim: reset must not run
     - vdpa/mlx5: Allow CVQ size changes
     - wireguard: receive: annotate data-race around receiving_counter.counter
     - rds: introduce acquire/release ordering in acquire/release_in_xmit()
     - hsr: Handle failures in module init
     - ipv4: raw: Fix sending packets from raw sockets via IPsec tunnels
     - net: phy: fix phy_read_poll_timeout argument type in genphy_loopback
     - dm-integrity: fix a memory leak when rechecking the data
     - net/bnx2x: Prevent access to a freed page in page_pool
     - netfilter: nft_set_pipapo: release elements in clone only from destroy
       path (CVE-2024-26809)
     - netfilter: nf_tables: do not compare internal table flags on updates
     - rcu: add a helper to report consolidated flavor QS
     - net: report RCU QS on threaded NAPI repolling
     - bpf: report RCU QS in cpumap kthread
     - net: dsa: mt7530: fix link-local frames that ingress vlan filtering ports
     - net: dsa: mt7530: fix handling of all link-local frames
     - spi: spi-mt65xx: Fix NULL pointer access in interrupt handler
     - dm: address indent/space issues
     - dm io: Support IO priority
     - dm-integrity: align the outgoing bio in integrity_recheck
     - [armhf] remoteproc: stm32: fix incorrect optional pointers
     https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.84
     - [x86] cpu: Support AMD Automatic IBRS
     - [x86] bugs: Use sysfs_emit()
     - [x86] KVM: x86: Update KVM-only leaf handling to allow for 100% KVM-only
       leafs
     - [x86] KVM: x86: Advertise CPUID.(EAX=7,ECX=2):EDX[5:0] to userspace
     - [x86] KVM: x86: Use a switch statement and macros in 
__feature_translate()
     - timers: Update kernel-doc for various functions
     - timers: Use del_timer_sync() even on UP
     - timers: Rename del_timer_sync() to timer_delete_sync()
     - wifi: brcmfmac: Fix use-after-free bug in brcmf_cfg80211_detach
     - media: staging: ipu3-imgu: Set fields before media_entity_pads_init()
     - [arm64] dts: qcom: sc7280: Add additional MSI interrupts
     - [arm64,armhf] remoteproc: virtio: Fix wdg cannot recovery remote 
processor
     - [arm64] clk: qcom: gcc-sdm845: Add soft dependency on rpmhpd
     - [armhf] arm: dts: marvell: Fix maxium->maxim typo in brownstone dts
     - drm/vmwgfx: Fix possible null pointer derefence with invalid contexts
     - serial: max310x: fix NULL pointer dereference in I2C instantiation
     - pci_iounmap(): Fix MMIO mapping leak
     - media: xc4000: Fix atomicity violation in xc4000_get_frequency
     - media: mc: Add local pad to pipeline regardless of the link state
     - media: mc: Fix flags handling when creating pad links
     - media: mc: Add num_links flag to media_pad
     - media: mc: Rename pad variable to clarify intent
     - media: mc: Expand MUST_CONNECT flag to always require an enabled link
     - KVM: Always flush async #PF workqueue when vCPU is being destroyed
     - [x86] cpufreq: amd-pstate: Fix min_perf assignment in
       amd_pstate_adjust_perf()
     - [powerpc*] smp: Adjust nr_cpu_ids to cover all threads of a core
     - [powerpc*] smp: Increase nr_cpu_ids to include the boot CPU
     - [x86] crypto: qat - fix double free during reset
     - [x86] crypto: qat - resolve race condition during AER recovery
     - ext4: correct best extent lstart adjustment logic
     - block: Clear zone limits for a non-zoned stacked queue
     - bounds: support non-power-of-two CONFIG_NR_CPUS
     - fat: fix uninitialized field in nostale filehandles
     - ubifs: Set page uptodate in the correct place
     - ubi: Check for too small LEB size in VTBL code
     - ubi: correct the calculation of fastmap size
     - md/raid5: fix atomicity violation in raid5_cache_count
     - cpufreq: Limit resolving a frequency to policy min/max
     - PM: suspend: Set mem_sleep_current during kernel command line setup
     - usb: xhci: Add error handling in xhci_map_urb_for_dma
     - [powerpc*] fsl: Fix mfpmr build errors with newer binutils
     - USB: serial: ftdi_sio: add support for GMC Z216C Adapter IR-USB
     - USB: serial: add device ID for VeriFone adapter
     - USB: serial: cp210x: add ID for MGP Instruments PDS100
     - USB: serial: option: add MeiG Smart SLM320 product
     - [x86] KVM: x86/xen: inject vCPU upcall vector when local APIC is enabled
     - USB: serial: cp210x: add pid/vid for TDK NC0110013M and MM0110113M
     - PM: sleep: wakeirq: fix wake irq warning in system suspend
     - mmc: tmio: avoid concurrent runs of mmc_request_done()
     - fuse: fix root lookup with nonzero generation
     - fuse: don't unhash root
     - usb: typec: ucsi: Clean up UCSI_CABLE_PROP macros
     - serial: Lock console when calling into driver before registration
     - btrfs: qgroup: always free reserved space for extent records
     - btrfs: fix off-by-one chunk length calculation at
       contains_pending_extent()
     - PCI/PM: Drain runtime-idle callbacks before driver removal
     - PCI/DPC: Quirk PIO log size for Intel Raptor Lake Root Ports
     - dm-raid: fix lockdep waring in "pers->hot_add_disk"
     - [powerpc*] xor_vmx: Add '-mhard-float' to CFLAGS
     - mac802154: fix llsec key resources release in mac802154_llsec_key_del
     - swap: comments get_swap_device() with usage rule
     - mm: swap: fix race between free_swap_and_cache() and swapoff()
     - mmc: core: Fix switch on gp3 partition
     - [arm64,armhf] drm/etnaviv: Restore some id values
     - landlock: Warn once if a Landlock action is requested while disabled
     - hwmon: (amc6821) add of_match table
     - ext4: fix corruption during on-line resize
     - nvmem: meson-efuse: fix function pointer type mismatch
     - slimbus: core: Remove usage of the deprecated ida_simple_xx() API
     - phy: tegra: xusb: Add API to retrieve the port number of phy
     - usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic
     - speakup: Fix 8bit characters from direct synth
     - PCI/AER: Block runtime suspend when handling errors
     - io_uring/net: correctly handle multishot recvmsg retry setup
     - nfs: fix UAF in direct writes
     - kbuild: Move -Wenum-{compare-conditional,enum-conversion} into W=1
     - [arm64] PCI: qcom: Rename qcom_pcie_config_sid_sm8250() to reflect IP
       version
     - [arm64] PCI: qcom: Enable BDF to SID translation properly
     - [amd64,arm64] PCI: hv: Fix ring buffer size calculation
     - vfio: Use GFP_KERNEL_ACCOUNT for userspace persistent allocations
     - vfio/pci: Consolidate irq cleanup on MSI/MSI-X disable
     - vfio/pci: Remove negative check on unsigned vector
     - vfio/pci: Lock external INTx masking ops (CVE-2024-26810)
     - vfio/platform: Disable virqfds on cleanup
     - ksmbd: retrieve number of blocks using vfs_getattr in
       set_file_allocation_info
     - ring-buffer: Fix waking up ring buffer readers
     - ring-buffer: Do not set shortest_full when full target is hit
     - ring-buffer: Fix resetting of shortest_full
     - ring-buffer: Fix full_waiters_pending in poll
     - ring-buffer: Use wait_event_interruptible() in ring_buffer_wait()
     - [s390x] zcrypt: fix reference counting on zcrypt card objects
     - drm/probe-helper: warn about negative .get_modes()
     - drm/panel: do not return negative error codes from drm_panel_get_modes()
     - [armhf] drm/exynos: do not return negative values from .get_modes()
     - [armhf] drm/imx/ipuv3: do not return negative values from .get_modes()
     - [arm64,armhf] drm/vc4: hdmi: do not return negative values from
       .get_modes()
     - memtest: use {READ,WRITE}_ONCE in memory scanning
     - Revert "block/mq-deadline: use correct way to throttling write requests"
     - f2fs: mark inode dirty for FI_ATOMIC_COMMITTED flag
     - f2fs: truncate page cache before clearing flags when aborting atomic 
write
     - nilfs2: fix failure to detect DAT corruption in btree and direct mappings
     - nilfs2: prevent kernel bug at submit_bh_wbc()
     - cifs: open_cached_dir(): add FILE_READ_EA to desired access
     - cpufreq: dt: always allocate zeroed cpumask
     - [amd64] x86/CPU/AMD: Update the Zenbleed microcode revisions
     - NFSD: Fix nfsd_clid_class use of __string_len() macro
     - net: hns3: tracing: fix hclgevf trace event strings
     - wireguard: netlink: check for dangling peer via is_dead instead of empty
       list
     - wireguard: netlink: access device through ctx instead of peer
     - ahci: asm1064: correct count of reported ports
     - ahci: asm1064: asm1166: don't limit reported ports
     - drm/amdgpu: amdgpu_ttm_gart_bind set gtt bound flag
     - drm/amd/display: Return the correct HDCP error code
     - drm/amd/display: Fix noise issue on HDMI AV mute
     - dm snapshot: fix lockup in dm_exception_table_exit
     - [x86] pm: Work around false positive kmemleak report in
       msr_build_context()
     - cpufreq: brcmstb-avs-cpufreq: fix up "add check for cpufreq_cpu_get's
       return value"
     - [x86] platform/x86: p2sb: On Goldmont only cache P2SB and SPI devfn BAR
       (Closes: #1065320)
     - tls: fix race between tx work scheduling and socket close 
(CVE-2024-26585)
     - netfilter: nf_tables: mark set as dead when unbinding anonymous set with
       timeout (CVE-2024-26643)
     - netfilter: nf_tables: disallow anonymous set with timeout flag
       (CVE-2024-26642)
     - netfilter: nf_tables: reject constant set with timeout
     - Drivers: hv: vmbus: Calculate ring buffer size for more efficient use of
       memory
     - init/Kconfig: lower GCC version check for -Warray-bounds
     - [x86] KVM: x86: Mark target gfn of emulated atomic instruction as dirty
     - [x86] KVM: SVM: Flush pages under kvm->lock to fix UAF in
       svm_register_enc_region()
     - tracing: Use .flush() call to wake up readers
     - drm/amdgpu/pm: Fix the error of pwm1_enable setting
     - [x86] drm/i915: Check before removing mm notifier
     - ALSA: hda/realtek - Fix headset Mic no show at resume back for Lenovo
       ALC897 platform
     - USB: usb-storage: Prevent divide-by-0 error in isd200_ata_command
     - usb: gadget: ncm: Fix handling of zero block length packets
     - usb: port: Don't try to peer unused USB ports based on location
     - tty: serial: fsl_lpuart: avoid idle preamble pending if CTS is enabled
     - misc: lis3lv02d_i2c: Fix regulators getting en-/dis-abled twice on
       suspend/resume
     - mei: me: add arrow lake point S DID
     - mei: me: add arrow lake point H DID
     - vt: fix unicode buffer corruption when deleting characters
     - fs/aio: Check IOCB_AIO_RW before the struct aio_kiocb conversion
     - ALSA: hda/realtek - Add Headset Mic supported Acer NB platform
     - ALSA: hda/realtek: fix mute/micmute LEDs for HP EliteBook
     - tee: optee: Fix kernel panic caused by incorrect error handling
     - mm, vmscan: prevent infinite loop for costly GFP_NOIO |
       __GFP_RETRY_MAYFAIL allocations
     - iio: accel: adxl367: fix DEVID read after reset
     - iio: accel: adxl367: fix I2C FIFO data register
     - i2c: i801: Avoid potential double call to gpiod_remove_lookup_table
     - drm/amd/display: handle range offsets in VRR ranges
     - [x86] efistub: Call mixed mode boot services on the firmware's stack
     - net: tls: handle backlogging of crypto requests (CVE-2024-26584)
     - [x86] ASoC: amd: yc: Revert "Fix non-functional mic on Lenovo 21J2"
     - iommu: Avoid races around default domain allocations
     - clocksource/drivers/arm_global_timer: Fix maximum prescaler value
     - entry: Respect changes to system call number by trace_sys_enter()
     - minmax: add umin(a, b) and umax(a, b)
     - swiotlb: Fix alignment checks when both allocation and DMA masks are
       present
     - iommu/dma: Force swiotlb_max_mapping_size on an untrusted device
     - printk: Update @console_may_schedule in console_trylock_spinning()
     - irqchip/renesas-rzg2l: Implement restriction when writing ISCR register
     - irqchip/renesas-rzg2l: Flush posted write in irq_eoi()
     - irqchip/renesas-rzg2l: Add macro to retrieve TITSR register offset based
       on register's index
     - irqchip/renesas-rzg2l: Rename rzg2l_tint_eoi()
     - irqchip/renesas-rzg2l: Rename rzg2l_irq_eoi()
     - irqchip/renesas-rzg2l: Prevent spurious interrupts when setting trigger
       type
     - [x86] kprobes/x86: Use copy_from_kernel_nofault() to read from unsafe
       address
     - [x86] fpu: Keep xfd_state in sync with MSR_IA32_XFD
     - pwm: img: fix pwm clock lookup
     - tty: serial: imx: Fix broken RS485
     - block: Fix page refcounts for unaligned buffers in __bio_release_pages()
     - blk-mq: release scheduler resource when request completes
     - vfio/pci: Disable auto-enable of exclusive INTx IRQ (CVE-2024-27437)
     - vfio: Introduce interface to flush virqfd inject workqueue
     - vfio/pci: Create persistent INTx handler (CVE-2024-26812)
     - vfio/platform: Create persistent IRQ handlers (CVE-2024-26813)
     - vfio/fsl-mc: Block calling interrupt handler without trigger
       (CVE-2024-26814)
     - [x86] coco: Export cc_vendor
     - [x86] coco: Get rid of accessor functions
     - [x86] Kconfig: Remove CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT
     - [x86] sev: Fix position dependent variable references in startup code
     - mm/migrate: set swap entry values of THP tail pages properly.
     - init: open /initrd.image with O_LARGEFILE
     - [x86] efistub: Add missing boot_params for mixed mode compat entry
     - btrfs: zoned: don't skip block groups with 100% zone unusable
     - btrfs: zoned: use zone aware sb location for scrub
     - wifi: mac80211: check/clear fast rx for non-4addr sta VLAN changes
     - wifi: iwlwifi: fw: don't always use FW dump trig
     - exec: Fix NOMMU linux_binprm::exec in transfer_args_to_stack()
     - hexagon: vmlinux.lds.S: handle attributes section
     - mmc: sdhci-omap: re-tuning is needed after a pm transition to support 
emmc
       HS200 mode
     - mmc: core: Initialize mmc_blk_ioc_data
     - mmc: core: Avoid negative index with array access
     - block: Do not force full zone append completion in req_bio_endio()
     - thermal: devfreq_cooling: Fix perf state when calculate dfc res_util
     - nouveau/dmem: handle kcalloc() allocation failure
     - net: ll_temac: platform_get_resource replaced by wrong function
     - drm/vmwgfx: Create debugfs ttm_resource_manager entry only if needed
     - [x86] drm/i915/bios: Tolerate devdata==NULL in
       intel_bios_encoder_supports_dp_dual_mode()
     - [x86] drm/i915/gt: Reset queue_priority_hint on parking
     - Bluetooth: hci_sync: Fix not checking error on hci_cmd_sync_cancel_sync
     - Revert "usb: phy: generic: Get the vbus supply"
     - usb: cdc-wdm: close race between read and workqueue
     - USB: UAS: return ENODEV when submit urbs fail with device not attached
     - usb: dwc3-am62: Rename private data
     - usb: dwc3-am62: fix module unload/reload behavior
     - ALSA: sh: aica: reorder cleanup operations to avoid UAF bugs
       (CVE-2024-26654)
     - scsi: core: Fix unremoved procfs host directory regression
     - staging: vc04_services: changen strncpy() to strscpy_pad()
     - staging: vc04_services: fix information leak in create_component()
     - USB: core: Add hub_get() and hub_put() routines
     - USB: core: Fix deadlock in port "disable" sysfs attribute
     - scsi: sd: Fix TCG OPAL unlock on system resume
     - usb: dwc2: host: Fix remote wakeup from hibernation
     - usb: dwc2: host: Fix hibernation flow
     - usb: dwc2: host: Fix ISOC flow in DDMA mode
     - usb: dwc2: gadget: Fix exiting from clock gating
     - usb: dwc2: gadget: LPM flow fix
     - usb: udc: remove warning when queue disabled ep
     - usb: typec: Return size of buffer if pd_set operation succeeds
     - usb: typec: ucsi: Clear EVENT_PENDING under PPM lock
     - usb: typec: ucsi: Ack unsupported commands
     - usb: typec: ucsi_acpi: Refactor and fix DELL quirk
     - usb: typec: ucsi: Clear UCSI_CCI_RESET_COMPLETE before reset
     - scsi: qla2xxx: Prevent command send on chip reset
     - scsi: qla2xxx: Fix N2N stuck connection
     - scsi: qla2xxx: Split FCE|EFT trace control
     - scsi: qla2xxx: Update manufacturer detail
     - scsi: qla2xxx: NVME|FCP prefer flag not being honored
     - scsi: qla2xxx: Fix command flush on cable pull
     - scsi: qla2xxx: Fix double free of fcport
     - scsi: qla2xxx: Change debug message during driver unload
     - scsi: qla2xxx: Delay I/O Abort on PCI error
     - [x86] cpu: Enable STIBP on AMD if Automatic IBRS is enabled
     - tls: fix use-after-free on failed backlog decryption (CVE-2024-26800)
     - scsi: lpfc: Correct size for cmdwqe/rspwqe for memset()
     - scsi: lpfc: Correct size for wqe for memset()
     - scsi: libsas: Add a helper sas_get_sas_addr_and_dev_type()
     - scsi: libsas: Fix disk not being scanned in after being removed
     - [x86] sev: Skip ROM range scans and validation for SEV-SNP guests
     - USB: core: Fix deadlock in usb_deauthorize_interface()
     - tools/resolve_btfids: fix build with musl libc
     https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.85
     - scripts/bpf_doc: Use silent mode when exec make cmd
     - dma-buf: Fix NULL pointer dereference in sanitycheck()
     - nfc: nci: Fix uninit-value in nci_dev_up and nci_ntf_packet
     - mlxbf_gige: stop PHY during open() error paths
     - wifi: iwlwifi: mvm: rfi: fix potential response leaks
     - ixgbe: avoid sleeping allocation in ixgbe_ipsec_vf_add_sa()
     - [s390x] qeth: handle deferred cc1
     - tcp: properly terminate timers for kernel sockets
     - net: wwan: t7xx: Split 64bit accesses to fix alignment issues
     - [arm64] net: hns3: fix index limit to support all queue stats
     - [arm64] net: hns3: fix kernel crash when devlink reload during pf
       initialization
     - [arm64] net: hns3: mark unexcuted loopback test result as UNEXECUTED
     - tls: recv: process_rx_list shouldn't use an offset with kvec
     - tls: adjust recv return with async crypto and failed copy to userspace
     - tls: get psock ref after taking rxlock to avoid leak
     - mlxbf_gige: call request_irq() after NAPI initialized
     - bpf: Protect against int overflow for stack access size
     - cifs: Fix duplicate fscache cookie warnings
     - net: lan743x: Add set RFE read fifo threshold for PCI1x1x chips
     - inet: inet_defrag: prevent sk release while still in use
     - dm integrity: fix out-of-range warning
     - [x86] cpufeatures: Add new word for scattered features
     - [x86] perf/x86/amd/lbr: Use freeze based on availability
     - [arm64] KVM: arm64: Fix host-programmed guest events in nVHE
     - r8169: fix issue caused by buggy BIOS on certain boards with RTL8168d
     - [x86] cpufeatures: Add CPUID_LNX_5 to track recently added Linux-defined
       word
     - Revert "Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT"
     - [arm64] dts: qcom: sc7180-trogdor: mark bluetooth address as broken
     - Bluetooth: qca: fix device-address endianness
     - Bluetooth: add quirk for broken address properties
     - Bluetooth: hci_event: set the conn encrypted before conn establishes
     - Bluetooth: Fix TOCTOU in HCI debugfs implementation (CVE-2024-24857,
       CVE-2024-24858)
     - xen-netfront: Add missing skb_mark_for_recycle
     - net/rds: fix possible cp null dereference
     - net: usb: ax88179_178a: avoid the interface always configured as random
       address
     - vsock/virtio: fix packet delivery to tap device
     - Revert "x86/mm/ident_map: Use gbpages only where full GB page should be
       mapped."
     - netfilter: nf_tables: reject new basechain after table flag update
     - netfilter: nf_tables: flush pending destroy work before exit_net release
     - netfilter: nf_tables: Fix potential data-race in
       __nft_flowtable_type_get()
     - netfilter: validate user input for expected length
     - vboxsf: Avoid an spurious warning if load_nls_xxx() fails
     - bpf, sockmap: Prevent lock inversion deadlock in map delete elem
     - net/sched: act_skbmod: prevent kernel-infoleak
     - net/sched: fix lockdep splat in qdisc_tree_reduce_backlog()
     - net: stmmac: fix rx queue priority assignment
     - net: phy: micrel: lan8814: Fix when enabling/disabling 1-step 
timestamping
     - net: phy: micrel: Fix potential null pointer dereference
     - gro: fix ownership transfer
     - [x86] bugs: Fix the SRSO mitigation on Zen3/4
     - [x86] retpoline: Do the necessary fixup to the Zen3/4 srso return thunk
       for !SRSO
     - i40e: Fix VF MAC filter removal
     - erspan: make sure erspan_base_hdr is present in skb->head
     - ipv6: Fix infinite recursion in fib6_dump_done().
     - mlxbf_gige: stop interface during shutdown
     - r8169: skip DASH fw status checks when DASH is disabled
     - udp: do not accept non-tunnel GSO skbs landing in a tunnel
     - udp: do not transition UDP GRO fraglist partial checksums to unnecessary
     - udp: prevent local UDP tunnel packets from being GROed
     - i40e: fix i40e_count_filters() to count only active/new filters
     - i40e: fix vf may be used uninitialized in this function warning
     - drm/amd: Evict resources during PM ops prepare() callback
     - drm/amd: Add concept of running prepare_suspend() sequence for IP blocks
     - drm/amd: Flush GFXOFF requests in prepare stage
     - i40e: Store the irq number in i40e_q_vector
     - i40e: Remove _t suffix from enum type names
     - i40e: Enforce software interrupt during busy-poll exit
     - r8169: use spinlock to protect mac ocp register access
     - r8169: use spinlock to protect access to registers Config2 and Config5
     - r8169: prepare rtl_hw_aspm_clkreq_enable for usage in atomic context
     - tcp: Fix bind() regression for v6-only wildcard and v4(-mapped-v6)
       non-wildcard addresses.
     - drivers: net: convert to boolean for the mac_managed_pm flag
     - net: fec: Set mac_managed_pm during probe
     - [x86] KVM: SVM: enhance info printk's in SEV init
     - [x86] KVM: SVM: WARN, but continue, if misc_cg_set_capacity() fails
     - [x86] KVM: SVM: Use unsigned integers when dealing with ASIDs
     - [x86] KVM: SVM: Add support for allowing zero SEV ASIDs
     - fs/pipe: Fix lockdep false-positive in watchqueue pipe_write()
     - 9p: Fix read/write debug statements to report server reply
     - drivers/perf: riscv: Disable PERF_SAMPLE_BRANCH_* while not supported
     - drm/panfrost: fix power transition timeout warnings
     - ASoC: rt5682-sdw: fix locking sequence
     - [x86] ASoC: rt711-sdca: fix locking sequence
     - ASoC: rt711-sdw: fix locking sequence
     - ASoC: ops: Fix wraparound for mask in snd_soc_get_volsw
     - ata: sata_sx4: fix pdc20621_get_from_dimm() on 64-bit
     - scsi: mylex: Fix sysfs buffer lengths
     - scsi: sd: Unregister device if device_add_disk() failed in sd_probe()
     - cifs: Fix caching to try to do open O_WRONLY as rdwr on server
     - ata: sata_mv: Fix PCI device ID table declaration compilation warning
     - nfsd: hold a lighter-weight client reference over CB_RECALL_ANY
     - [x86] retpoline: Add NOENDBR annotation to the SRSO dummy return thunk
     - ksmbd: don't send oplock break if rename fails
     - ksmbd: validate payload size in ipc response (CVE-2024-26811)
     - ksmbd: do not set SMB2_GLOBAL_CAP_ENCRYPTION for SMB 3.1.1
     - ALSA: hda/realtek - Fix inactive headset mic jack
     - ALSA: hda/realtek: Update Panasonic CF-SZ6 quirk to support headset with
       microphone
     - driver core: Introduce device_link_wait_removal()
     - of: dynamic: Synchronize of_changeset_destroy() with the devlink removals
     - [x86] mm/pat: fix VM_PAT handling in COW mappings
     - [x86] mce: Make sure to grab mce_sysfs_mutex in set_bank()
     - [x86] coco: Require seeding RNG with RDRAND on CoCo systems
     - [s390x] entry: align system call table on 8 bytes
     - smb3: retrying on failed server close
     - smb: client: fix potential UAF in cifs_debug_files_proc_show()
     - smb: client: fix potential UAF in cifs_stats_proc_write()
     - smb: client: fix potential UAF in cifs_stats_proc_show()
     - smb: client: fix potential UAF in smb2_is_valid_oplock_break()
     - smb: client: fix potential UAF in smb2_is_valid_lease_break()
     - smb: client: fix potential UAF in is_valid_oplock_break()
     - smb: client: fix potential UAF in smb2_is_network_name_deleted()
     - smb: client: fix potential UAF in cifs_signal_cifsd_for_reconnect()
     - mptcp: don't account accept() of non-MPC client as fallback to TCP
     - mm/secretmem: fix GUP-fast succeeding on secretmem folios
     - nvme: fix miss command type check
     - [x86] bugs: Change commas to semicolons in 'spectre_v2' sysfs file
     - [x86] syscall: Don't force use of indirect calls for system calls
     - [x86] Mitigate Native Branch History Injection vulnerability
       (CVE-2024-2201):
       + [x86] bhi: Add support for clearing branch history at syscall entry
       + [x86] bhi: Define SPEC_CTRL_BHI_DIS_S
       + [x86] bhi: Enumerate Branch History Injection (BHI) bug
       + [x86] bhi: Add BHI mitigation knob
       + [x86] bhi: Mitigate KVM by default
       + [x86] KVM: x86: Add BHI_NO
       + [x86] set SPECTRE_BHI_ON as default
 .
   [ Salvatore Bonaccorso ]
   * Bump ABI to 20
   * Refresh "efi: Lock down the kernel if booted in secure boot mode" (context
     changes in 6.1.84)
   * [rt] Refresh "serial: 8250: implement write_atomic"
   * Refresh "x86: Make x32 syscall support conditional on a kernel parameter"
   * tty: n_gsm: require CAP_NET_ADMIN to attach N_GSM0710 ldisc
     (Closes: #1068770)
   * Revert "scsi: sd: usb_storage: uas: Access media prior to querying device
     properties" (Closes: #1068675)
   * Revert "scsi: core: Add struct for args to execution functions"
   * scsi: sd: usb_storage: uas: Access media prior to querying device 
properties
Checksums-Sha1:
 96e8580cb1462ba438fc28d27cdf06c154308756 290924 linux_6.1.85-1.dsc
 86985ea19cf9db504e226f0a70a6cf848819af06 137597252 linux_6.1.85.orig.tar.xz
 e8234e6475fbaefca69cacd1f9b62fd7fb1f68b6 1627960 linux_6.1.85-1.debian.tar.xz
 e5b81a00a9ded9a8afda139d264bf89fb1969020 7117 linux_6.1.85-1_source.buildinfo
Checksums-Sha256:
 4b9de409835ac055d92e13763c4228dfb706f40c61352e512fdc98245f24f1d7 290924 
linux_6.1.85-1.dsc
 528d48ab19f355c6706263723cfda108492ac2dcb4de8af21f8b1676c8373d7d 137597252 
linux_6.1.85.orig.tar.xz
 99cc3b914e71fade4613d90c895232c16268565b8d04ee765e6c553b770d0d00 1627960 
linux_6.1.85-1.debian.tar.xz
 2cc607f072d991c8c7c4c648cc9b0508c222c8a3f5310eed8909e1cd4d14620a 7117 
linux_6.1.85-1_source.buildinfo
Files:
 f801414be0ef36d4aa5d222a272474ba 290924 kernel optional linux_6.1.85-1.dsc
 fdb3b2b8121867f9afbfb10d3228e503 137597252 kernel optional 
linux_6.1.85.orig.tar.xz
 ef7c37741e655176e7a9d80f957aaf79 1627960 kernel optional 
linux_6.1.85-1.debian.tar.xz
 0aae449aad4f075e10bf6326d163d196 7117 kernel optional 
linux_6.1.85-1_source.buildinfo

-----BEGIN PGP SIGNATURE-----

iQKmBAEBCgCQFiEERkRAmAjBceBVMd3uBUy48xNDz0QFAmYYVBVfFIAAAAAALgAo
aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldDQ2
NDQ0MDk4MDhDMTcxRTA1NTMxRERFRTA1NENCOEYzMTM0M0NGNDQSHGNhcm5pbEBk
ZWJpYW4ub3JnAAoJEAVMuPMTQ89EvbkP/2Zd6wVKsV/Z/2GoghzAtDleF35//r+8
7nubdrpLCeAzZOijTZgY7ERF8FplM0SH/TkN4WfBeixUoiLOGBTQ+/UsIDD10uX6
BghmyU6NS1yzWBdEfyrNlexF0qe+3oL32myPP6khgN+MwLD9pgXCY+drWDiP/TJL
oCrSRCoJk+ctidxAUDFTfliiqHnCp7grmrbPfYBpsEimTJ/ajJYDNmSgU6z2gqXF
5yrblZl3r3/43HwiWcuSjq1OW/YNIiaPiThN2VXwQjQEUzXbVVsC+dHIOjj0/xQ/
nLo/A2le1DCY+YsbCMQAgRPb8UD5hjR+XNjoN/kOOmdyBlhZN1VEvZ/zbBhWt5B4
pUBQbN1nqQQsFbri698oV/yYa//QfvHojmRDeJaJ0zXEpXmJwp7GFumsJLJFXjS8
E/RI92jWvAnHuc2UrWFWaOxI0VOM9frQZl3gVseyOAlUlRVI7CGl0syAA2jHmgYU
aX65qphzNf6z0P4mlu8fSeezzhEJawXiYxtfuYcfQCxeRatMt+pXJkof6r5kntO+
lGYpiRyRYS4UP71MDg+TSHjsJC45/vyg0chbAPZbd/Z7qSoazRqWvcUD+7ffx/KQ
aOfnd6EyrulLmM52LLUloE1pkKUhUpSjblZtIwQg33v1SrtyfjSUlKWkQrZYzrSJ
vMoPNRn/MHu5
=48oX
-----END PGP SIGNATURE-----

Attachment: pgpFJbtLo5lQo.pgp
Description: PGP signature


--- End Message ---

Reply via email to