On Sat, Aug 12, 2006 at 01:39:58PM +0100, Mark Purcell wrote: > Christoph, > > On Saturday 12 August 2006 12:48, Christoph Kaminski wrote: > > 01:06.0 Network controller: Cologne Chip Designs GmbH ISDN network > > controller [HFC-PCI] (rev 02) > > Thanks I think this is the nub of the problem. > > Unfortunately I don't have access to ISDN hardware so won't be able to debug > too well remotely. > > > cat /etc/zaptel.conf > > # hfc-s pci a span definition > > # most of the values should be bogus because we are not really zaptel > > loadzone=nl > > defaultzone=nl > > > > span=1,1,3,ccs,ami > > bchan=1-2 > > dchan=3 > > This isn't shipped by the zaptel package, but is used by the package to gain > configuration details.. Did you provide this config yourself? OR did it come > with the hardware. > > > Zaptel cards initial configuration: ZT_SPANCONFIG failed on span 1: > > Invalid argument (22) > > It seems like the zaptel startup doesn't like the span=1,1,3,ccs,ami from > your > config file. Did this work with previous versions?
What is the output of: cat /proc/zaptel/* ? > > I suspect is is failing on the ztcgf(8) command: Right. However a failure of the zaptel init.d script should not fail the package installation, right? > > Can you run: > > # ztcfg -vvvt > > and forward the results. > > Then I would suggest that you need to edit your modified zaptel.conf, until > ztcfg does run correctly. > > I might return to shipping the default zaptel.conf file under /etc so that > when user mods are made it is brought to immediate attention. Although the > default doesn't cover a lot of cases, at least it is a starting point and > changes will be aparent. > > Also the genzaptelconf(8) script, might be able to assist with the > regeneration of your zaptel.conf file, although we proably don't want to > automate the running of that just yet. With BRI and PRI it is not good enough for fully-automated configuration. But will surely give something that will make ztcfg happy. -- Tzafrir Cohen sip:[EMAIL PROTECTED] icq#16849755 iax:[EMAIL PROTECTED] +972-50-7952406 jabber:[EMAIL PROTECTED] [EMAIL PROTECTED] http://www.xorcom.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
