Package: linux-image-2.6.17-1-em64t-p4-smp Version: 2.6.17-4 Architecture: x86_64 Severity: serious
I have 2 network cards. In 50% boot is successfull. In this case it initializes network cards same way if i use kernel with no smp: in my example RTL8169 is eth0, Tigon3 is eth1. But in other 50% boot hangs about 3 times for about 15 seconds, and each time prints error message: "rename_net_if: error changing interface name eth1_temp to eth0: timeout". I find out that in this case Tigon3 initializes first and takes eth0. Finally after boot finishes i have eth0 is what should be eth1, but eth1 doesn't exist at all. I never get this when using no-smp kernel. kern.log when boot successfull: Jul 30 17:02:09 viiv kernel: r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded Jul 30 17:02:09 viiv kernel: eth0: Identified chip type is 'RTL8169s/8110s'. Jul 30 17:02:09 viiv kernel: eth0: RTL8169 at 0xffffc20000002000, 00:80:48:3d:54:91, IRQ 217 ... Jul 30 17:02:09 viiv kernel: eth1: Tigon3 [partno(BCM95789) rev 4101 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:14:85:c2:86:32 Jul 30 17:02:09 viiv kernel: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] Jul 30 17:02:09 viiv kernel: eth1: dma_rwctrl[76180000] dma_mask[64-bit] not successfull: Jul 30 03:30:27 viiv kernel: eth0: Tigon3 [partno(BCM95789) rev 4101 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:14:85:c2:86:32 Jul 30 03:30:27 viiv kernel: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] Jul 30 03:30:27 viiv kernel: eth0: dma_rwctrl[76180000] dma_mask[64-bit] Jul 30 03:30:27 viiv kernel: r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded Jul 30 03:30:27 viiv kernel: eth1: Identified chip type is 'RTL8169s/8110s'. Jul 30 03:30:27 viiv kernel: eth1: RTL8169 at 0xffffc20000004000, 00:80:48:3d:54:91, IRQ 217 I tested on kernel 2.6.16-17 smp and no-smp kernels - same story. I marked severity as serious cos our web-servers auto-reboot and will become not usable at all. CPU: Pentium D 940 Sergey Nivarov -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
