This bug was reported against Stable. It cannot be considered as closed for as long as a new 5.10 kernel including the fix hasn't been published.
Martin-Éric On Thu, Sep 1, 2022 at 5:15 PM Debian Bug Tracking System <[email protected]> wrote: > > This is an automatic notification regarding your Bug report > which was filed against the src:linux package: > > #1017425: [i386] Unconditional LFENCE instructions in FILL_RETURN_BUFFER > > It has been closed by Debian FTP Masters <[email protected]> > (reply to Salvatore Bonaccorso <[email protected]>). > > Their explanation is attached below along with your original report. > If this explanation is unsatisfactory and you have not received a > better one in a separate message then please contact Debian FTP Masters > <[email protected]> (reply to Salvatore Bonaccorso > <[email protected]>) by > replying to this email. > > > -- > 1017425: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1017425 > Debian Bug Tracking System > Contact [email protected] with problems > > > > ---------- Forwarded message ---------- > From: Debian FTP Masters <[email protected]> > To: [email protected] > Cc: > Bcc: > Date: Thu, 01 Sep 2022 14:10:11 +0000 > Subject: Bug#1017425: fixed in linux 5.19.6-1 > Source: linux > Source-Version: 5.19.6-1 > Done: Salvatore Bonaccorso <[email protected]> > > We believe that the bug you reported is fixed in the latest version of > linux, which is due to be installed in the Debian FTP archive. > > A summary of the changes between this version and the previous one is > attached. > > Thank you for reporting the bug, which will now be closed. If you > have further comments please address them to [email protected], > and the maintainer will reopen the bug report if appropriate. > > Debian distribution maintenance software > pp. > Salvatore Bonaccorso <[email protected]> (supplier of updated linux package) > > (This message was generated automatically at their request; if you > believe that there is a problem with it please contact the archive > administrators by mailing [email protected]) > > > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA512 > > Format: 1.8 > Date: Thu, 01 Sep 2022 09:04:35 +0200 > Source: linux > Architecture: source > Version: 5.19.6-1 > Distribution: unstable > Urgency: medium > Maintainer: Debian Kernel Team <[email protected]> > Changed-By: Salvatore Bonaccorso <[email protected]> > Closes: 1016807 1017425 1017894 1017972 1018752 > Changes: > linux (5.19.6-1) unstable; urgency=medium > . > * New upstream stable update: > https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.19.1 > https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.19.2 > - Revert "net: usb: ax88179_178a needs FLAG_SEND_ZLP" (Closes: #1017894) > https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.19.3 > https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.19.4 > https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.19.5 > https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.19.6 > - mm/gup: fix FOLL_FORCE COW security issue and remove FOLL_COW > (CVE-2022-2590) > - af_key: Do not call xfrm_probe_algs in parallel (CVE-2022-3028) > - [x86] nospec: Unwreck the RSB stuffing > - [x86] nospec: Fix i386 RSB stuffing (Closes: #1017425) > - bpf: Don't use tnum_range on array range checking for poke descriptors > (CVE-2022-2905) > . > [ Ben Hutchings ] > * d/tests/kbuild: Fix default-flavour lookup for arches with no featuresets > * d/tests/kbuild: Make flavour lookup verbose > * d/lib/python/debian_linux, d/templates: Use variable for binary package > name > * lintian: Update overrides in linux-image-*-dbg for lintian 2.115 > * d/{signing_templates/,}rules.real: Run dh_lintian for all packages > * [hppa,mips,mipsel,powerpc] lintian: Override error for 64-bit kernels > * [mips64el,mipsel,ppc64el] lintian: Override error for unstripped vmlinux > * [arm64] lintian: Override errors for vdso32.so in linux-image-*-dbg > * android: Remove CONFIG_ANDROID: > - Drop "wireguard: Clear keys after suspend despite CONFIG_ANDROID=y" > - pm/sleep: Add PM_USERSPACE_AUTOSLEEP Kconfig > - remove CONFIG_ANDROID > - Enable/disable ANDROID_BINDER_IPC to match previous configuration > . > [ Vincent Blut ] > * [x86] drivers/hwmon: Enable SENSORS_ASUS_WMI and SENSORS_ASUS_EC as > modules > * [x86] drivers/platform/x86: Enable NVIDIA_WMI_EC_BACKLIGHT as module > (Closes: #1017972) > * [arm64] drivers/spi: Enable SPI_GPIO and SPI_SUN6I as modules > (Closes: #1016807) > . > [ Diederik de Haas ] > * [arm64] drivers/gpu/drm/rockchip: Explicitly enable ROCKCHIP_VOP > . > [ Helge Deller ] > * [hppa] Drop CONFIG_PATA_LEGACY for hppa architecture > . > [ Salvatore Bonaccorso ] > * [rt] Refresh "rcutorture: Also force sched priority to timersd on > boosting > test." > * Drop setting of CRYPTO_BLAKE2S > crypto: blake2s shash module was removed upstream. > * [arm] arch/arm/crypto: Enable CRYPTO_BLAKE2S_ARM > * certs: Rotate to use the "Debian Secure Boot Signer 2022 - linux" > certificate (Closes: #1018752) > * Set ABI to 1 > * [hppa/parisc64] Drop explicit setting of 64BIT > Checksums-Sha1: > 42a3c472d3128c9f851b9416e674497e8ddfd252 251841 linux_5.19.6-1.dsc > 1aac6f7bbdd6de2d32a8e8da75b163d79383d207 133767148 linux_5.19.6.orig.tar.xz > feabaae96187bad30f3967959c0c955fd050082c 1318072 linux_5.19.6-1.debian.tar.xz > 0db0b77cb3cdeee0a626e24fed1828d455bacb93 6975 linux_5.19.6-1_source.buildinfo > Checksums-Sha256: > 4cc09d519dbd22b1b2ca074b98c3caf101494982e170fafa858d6ee930b18b4f 251841 > linux_5.19.6-1.dsc > 57b61adbafbd97e41da2153a2733ba3d3d2963c96d391ce57b29c0bb58010de4 133767148 > linux_5.19.6.orig.tar.xz > e3f6a4e6191a0e67678dacba4beea0dcf61fc0d90a96ceb79d993f41f4da9275 1318072 > linux_5.19.6-1.debian.tar.xz > 6ed558d70babbcfcc1d648d319eac9e639b973693e68ee99d5121c38875edbdd 6975 > linux_5.19.6-1_source.buildinfo > Files: > 08b47f7b67275e2180c0aa6b4d9dfe9e 251841 kernel optional linux_5.19.6-1.dsc > f968bf5c2f82b1dc40754fde8bcbfddb 133767148 kernel optional > linux_5.19.6.orig.tar.xz > 086b762bf7e3734ab211ecfad57d8c58 1318072 kernel optional > linux_5.19.6-1.debian.tar.xz > 0db0c08b0dc5c25e6042db1c5feaffe3 6975 kernel optional > linux_5.19.6-1_source.buildinfo > > -----BEGIN PGP SIGNATURE----- > > iQKmBAEBCgCQFiEERkRAmAjBceBVMd3uBUy48xNDz0QFAmMQWkRfFIAAAAAALgAo > aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldDQ2 > NDQ0MDk4MDhDMTcxRTA1NTMxRERFRTA1NENCOEYzMTM0M0NGNDQSHGNhcm5pbEBk > ZWJpYW4ub3JnAAoJEAVMuPMTQ89E8vUP/iCUO04lUb4AauAGRemK+AlnyZnh++oM > tuqA/FWYUX+iuIE3CyutJgCFGxIGru7Hc3kHtJchbeZM90DbTo/kDlH+M0T6+24i > PMWLuHRWZScJVpOO3ZhJ4nni5/T1r+Q1BjUYYfB3Skvxwu6KNJCTWpBXUekgsMAx > IGviP7jg7T1wNlxfLFLHkPaHDUOGQ9N8jqVJRJgBC5XF3aquGw6GVeS2HKISFSg0 > 83RdmmBlN38V9xOiggzKKIxj9OCcdVc17bGNUQsXmxYmhgoqbzE43F+CBE7JAqzH > 9Z2GHTMJvha2hNKLaHoNEcXn6aJMEkszXaFFiILkO6diZbX971jp39KfnuVzQ7J5 > RypFZtVGXTQXvzPksalMDCVQgGzU5KBukb6Q0D9b2M49gMvWfCNrrwpTNu25+do4 > e/OMgIUgk7dsoUtBr9Iqa5saBP1NULFumWW2N8S1qAyvilOYryYCt2ZTsuvsi1cy > NfVzUfyhyK1sY1HIDIz/+ufcfwWTNAh5TpfZeceeaKZDSDCPH3c/E/8NJxCP3mr6 > JLT3NXzCDe26YHqDjLKWnbZy9aYbyEpcnmgPA7KuRx+YLGyJ3B7xPIGPvEQsbCsJ > UEQ126lBAtulJ1YiCHaGRcCJTS1W6cerPBYF34oTy5GyCky3xcHSnd0qEWXDlw6k > fESUPZGDwiGd > =agDJ > -----END PGP SIGNATURE----- > > > ---------- Forwarded message ---------- > From: "Martin-Éric Racine" <[email protected]> > To: Debian Bug Tracking System <[email protected]> > Cc: > Bcc: > Date: Tue, 16 Aug 2022 06:57:22 +0300 > Subject: 5.10.0-17-686-pae: repeatedly crashes during initrd loading [PIII] > Package: src:linux > Version: 5.10.136-1 > Severity: grave > > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA256 > > 5.10.0-17-686-pae cannot boot on this Pentium III. The fan goes to full speed > during initrd loading and the host reboots at that point. There is no > screenshot to attach since there is no screen output after the "Loading > initrd..." message from GRUB2. > > Reverting to 5.10.0-16-686-pae, the fan runs at low speed and the host boots > normally. > > Martin-Éric > > - -- Package-specific info: > processor : 0 > vendor_id : GenuineIntel > cpu family : 6 > model : 8 > model name : Pentium III (Coppermine) > stepping : 6 > microcode : 0x8 > cpu MHz : 865.440 > cache size : 256 KB > physical id : 0 > siblings : 1 > core id : 0 > cpu cores : 1 > apicid : 0 > initial apicid : 0 > fdiv_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 2 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca > cmov pse36 mmx fxsr sse cpuid pti > bugs : cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass l1tf > mds swapgs itlb_multihit > bogomips : 1730.88 > clflush size : 32 > cache_alignment : 32 > address sizes : 36 bits physical, 32 bits virtual > power management: > > ** Kernel log: boot messages should be attached > > ** Model information > > ** PCI devices: > 00:00.0 Host bridge [0600]: Intel Corporation 82815 815 Chipset Host Bridge > and Memory Controller Hub [8086:1130] (rev 02) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort+ >SERR- <PERR- INTx- > Latency: 0 > Region 0: Memory at 48000000 (32-bit, prefetchable) [size=64M] > Capabilities: <access denied> > Kernel driver in use: agpgart-intel > > 00:01.0 PCI bridge [0604]: Intel Corporation 82815 815 Chipset AGP Bridge > [8086:1131] (rev 02) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 > I/O behind bridge: [disabled] > Memory behind bridge: 41000000-421fffff [size=18M] > Prefetchable memory behind bridge: 44000000-45ffffff [size=32M] > Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA+ VGA+ VGA16- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > > 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] > (rev 01) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Bus: primary=00, secondary=02, subordinate=02, sec-latency=64 > I/O behind bridge: 00001000-00001fff [size=4K] > Memory behind bridge: 40000000-405fffff [size=6M] > Prefetchable memory behind bridge: 20000000-200fffff [size=1M] > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > > 00:1f.0 ISA bridge [0601]: Intel Corporation 82801BA ISA Bridge (LPC) > [8086:2440] (rev 01) > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Kernel driver in use: lpc_ich > Kernel modules: intel_rng, lpc_ich > > 00:1f.1 IDE interface [0101]: Intel Corporation 82801BA IDE U100 Controller > [8086:244b] (rev 01) (prog-if 80 [ISA Compatibility mode-only controller, > supports bus mastering]) > Subsystem: Intel Corporation 82801BA IDE U100 Controller [8086:2411] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Region 0: Memory at 000001f0 (32-bit, non-prefetchable) [virtual] > [size=8] > Region 1: Memory at 000003f0 (type 3, non-prefetchable) [virtual] > Region 2: Memory at 00000170 (32-bit, non-prefetchable) [virtual] > [size=8] > Region 3: Memory at 00000370 (type 3, non-prefetchable) [virtual] > Region 4: I/O ports at 2460 [virtual] [size=16] > Kernel driver in use: ata_piix > Kernel modules: ata_piix, ata_generic > > 00:1f.4 USB controller [0c03]: Intel Corporation 82801BA/BAM UHCI USB 1.1 > Controller #2 [8086:2444] (rev 01) (prog-if 00 [UHCI]) > Subsystem: Intel Corporation 82801BA/BAM UHCI USB 1.1 Controller > [8086:2411] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin C routed to IRQ 23 > Region 4: I/O ports at 2440 [size=32] > Kernel driver in use: uhci_hcd > Kernel modules: uhci_hcd > > 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801BA/BAM > AC'97 Audio Controller [8086:2445] (rev 01) > Subsystem: Compaq Computer Corporation 82801BA/BAM AC'97 Audio > Controller [0e11:000e] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin B routed to IRQ 17 > Region 0: I/O ports at 2000 [size=256] > Region 1: I/O ports at 2400 [size=64] > Kernel driver in use: snd_intel8x0 > Kernel modules: snd_intel8x0 > > 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation NV5 [Riva TNT2 / > TNT2 Pro] [10de:0028] (rev 15) (prog-if 00 [VGA controller]) > Subsystem: Compaq Computer Corporation NV5 [Riva TNT2 / TNT2 Pro] > [0e11:001f] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 (1250ns min, 250ns max) > Interrupt: pin A routed to IRQ 18 > Region 0: Memory at 41000000 (32-bit, non-prefetchable) [size=16M] > Region 1: Memory at 44000000 (32-bit, prefetchable) [size=32M] > Expansion ROM at 000c0000 [virtual] [disabled] [size=128K] > Capabilities: <access denied> > Kernel driver in use: nouveau > Kernel modules: nouveau > > 02:04.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8169 > PCI Gigabit Ethernet Controller [10ec:8169] (rev 10) > Subsystem: Realtek Semiconductor Co., Ltd. RTL8169/8110 Family PCI > Gigabit Ethernet NIC [10ec:8169] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 16 > Region 0: I/O ports at 1000 [size=256] > Region 1: Memory at 40100000 (32-bit, non-prefetchable) [size=256] > Expansion ROM at 20000000 [virtual] [disabled] [size=128K] > Capabilities: <access denied> > Kernel driver in use: r8169 > Kernel modules: r8169 > > 02:08.0 Ethernet controller [0200]: Intel Corporation 82801BA/BAM/CA/CAM > Ethernet Controller [8086:2449] (rev 01) > Subsystem: Compaq Computer Corporation EtherExpress PRO/100 VM > [0e11:0012] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 20 > Region 0: Memory at 40000000 (32-bit, non-prefetchable) [size=4K] > Region 1: I/O ports at 1800 [size=64] > Capabilities: <access denied> > Kernel driver in use: e100 > Kernel modules: e100 > > 02:09.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8169 > PCI Gigabit Ethernet Controller [10ec:8169] (rev 10) > Subsystem: Realtek Semiconductor Co., Ltd. RTL8169/8110 Family PCI > Gigabit Ethernet NIC [10ec:8169] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 18 > Region 0: I/O ports at 1400 [size=256] > Region 1: Memory at 40200000 (32-bit, non-prefetchable) [size=256] > Expansion ROM at 20020000 [virtual] [disabled] [size=128K] > Capabilities: <access denied> > Kernel driver in use: r8169 > Kernel modules: r8169 > > 02:0a.0 USB controller [0c03]: VIA Technologies, Inc. VT82xx/62xx UHCI USB > 1.1 Controller [1106:3038] (rev 62) (prog-if 00 [UHCI]) > Subsystem: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller > [1106:3038] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 66, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 21 > Region 4: I/O ports at 1840 [size=32] > Capabilities: <access denied> > Kernel driver in use: uhci_hcd > Kernel modules: uhci_hcd > > 02:0a.1 USB controller [0c03]: VIA Technologies, Inc. VT82xx/62xx UHCI USB > 1.1 Controller [1106:3038] (rev 62) (prog-if 00 [UHCI]) > Subsystem: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller > [1106:3038] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 66, Cache Line Size: 32 bytes > Interrupt: pin B routed to IRQ 22 > Region 4: I/O ports at 1860 [size=32] > Capabilities: <access denied> > Kernel driver in use: uhci_hcd > Kernel modules: uhci_hcd > > 02:0a.2 USB controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] > (rev 65) (prog-if 20 [EHCI]) > Subsystem: VIA Technologies, Inc. USB 2.0 Controller [1106:3104] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 66, Cache Line Size: 32 bytes > Interrupt: pin C routed to IRQ 16 > Region 0: Memory at 40300000 (32-bit, non-prefetchable) [size=256] > Capabilities: <access denied> > Kernel driver in use: ehci-pci > Kernel modules: ehci_pci > > > ** USB devices: > Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > > > - -- System Information: > Debian Release: 11.4 > APT prefers stable-updates > APT policy: (500, 'stable-updates'), (500, 'stable-security'), (500, > 'stable-debug'), (500, 'stable') > Architecture: i386 (i686) > > Kernel: Linux 5.10.0-16-686-pae (SMP w/1 CPU thread) > Locale: LANG=fi_FI.UTF-8, LC_CTYPE=fi_FI.UTF-8 (charmap=UTF-8), LANGUAGE=fi:en > Shell: /bin/sh linked to /bin/dash > Init: systemd (via /run/systemd/system) > LSM: AppArmor: enabled > > Versions of packages linux-image-5.10.0-17-686-pae depends on: > ii initramfs-tools [linux-initramfs-tool] 0.140 > ii kmod 28-1 > ii linux-base 4.6 > > Versions of packages linux-image-5.10.0-17-686-pae recommends: > ii apparmor 2.13.6-10 > ii firmware-linux-free 20200122-1 > > Versions of packages linux-image-5.10.0-17-686-pae suggests: > pn debian-kernel-handbook <none> > ii grub-pc 2.04-20 > pn linux-doc-5.10 <none> > > Versions of packages linux-image-5.10.0-17-686-pae is related to: > ii firmware-amd-graphics 20210315-3 > pn firmware-atheros <none> > ii firmware-bnx2 20210315-3 > pn firmware-bnx2x <none> > pn firmware-brcm80211 <none> > pn firmware-cavium <none> > pn firmware-intel-sound <none> > pn firmware-intelwimax <none> > pn firmware-ipw2x00 <none> > pn firmware-ivtv <none> > ii firmware-iwlwifi 20210315-3 > pn firmware-libertas <none> > ii firmware-linux-nonfree 20210315-3 > ii firmware-misc-nonfree 20210315-3 > pn firmware-myricom <none> > pn firmware-netxen <none> > pn firmware-qlogic <none> > ii firmware-realtek 20210315-3 > pn firmware-samsung <none> > pn firmware-siano <none> > pn firmware-ti-connectivity <none> > pn xen-hypervisor <none> > > - -- no debconf information > > -----BEGIN PGP SIGNATURE----- > > iQIzBAEBCAAdFiEEyJACx3qL7GpObXOQrh+Cd8S017YFAmL7FZ4ACgkQrh+Cd8S0 > 17bSwRAAt8pHlQidSu4oZEixTcPgO6f42wNdBJXYjIyVBvRaI041n2GtLrnkv0nh > z7EdrKCUkfe2K4NhNFv25gFY8Lgy+VRmsXP4jsBGjSnH4goNlKfH4unRx6mZCbQH > Q4QlPvUrGUfVFTpZtApMG9rbAdU7mwzYGvKehj3kEfHNrWbutWUBdt93ky+RUR1g > 7hc/DAqip/T9/FhwvS+URKlShTfXKpP8l9ulgYwLAHjiU9iVK094JEBPc23X6CYw > n20fFe2BGHCR2kvOiBh+HvOw58kW6UMZfGqjWFy2lJVBB4S3xZkVPF8z1ass4EWI > 8D6JbYq8LrYGobntXVX9XW+Oh0Ie1GLwojcuquZqUFUT+DF1ZgfPUGv3XktjpwX8 > xT6tcOBbLhja5vcgBhhXXFoo0jYezq1nu5AqZ85SK9UFfK45rGcZ3ax+XfYHjZi8 > 1N7u3mKKeW6FtCCKXLuGg/esy2HYDcHfirnccYI850QGkgFmC8UUIYwthQMultTE > gWHctmHvwa9+2285le54kdzuvdeVusJQmVZVoLL/J0kK3RHZ+UAJuD75GbLrnQqD > MoC3p/woRbdZk82IYq5rxcKHQc5aMKGri+f8rES1hGWq8kd/zleGHkLj1ale3eJh > QIflvcTyOCMlyu1kxUDS6t1ITrInhLER7rMc0yNHXtSlOfc6qj4= > =Sz/b > -----END PGP SIGNATURE-----
