--- Begin Message ---
Source: criterion
Version: 2.4.0-rc-18-g1cc3911-1
Severity: important
X-Debbugs-Cc: mdbi...@disroot.org
Dear Maintainer,
criterion was found to fail to build during a test rebuild with libgit2 1.3.0
in unstable. Attaching the buildlogs.
-- System Information:
Debian Release: bookworm/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 5.16.0-6-amd64 (SMP w/8 CPU threads; PREEMPT)
Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_CRAP, TAINT_OOT_MODULE,
TAINT_UNSIGNED_MODULE
Locale: LANG=C.UTF-8, LC_CTYPE=C.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
sbuild (Debian sbuild) 0.83.0 (05 February 2022) on debian
+==============================================================================+
| criterion 2.4.0-rc-18-g1cc3911-1 (amd64) Tue, 05 Apr 2022 14:06:37 +0000 |
+==============================================================================+
Package: criterion
Version: 2.4.0-rc-18-g1cc3911-1
Source Version: 2.4.0-rc-18-g1cc3911-1
Distribution: unstable
Machine Architecture: amd64
Host Architecture: amd64
Build Architecture: amd64
Build Type: full
I: NOTICE: Log filtering will replace
'var/run/schroot/mount/unstable-amd64-sbuild-3f5ee7c7-561f-42ec-a51a-da83777d2c88'
with '<<CHROOT>>'
I: NOTICE: Log filtering will replace 'build/criterion-35Iwc1/resolver-D50ryu'
with '<<RESOLVERDIR>>'
+------------------------------------------------------------------------------+
| Update chroot |
+------------------------------------------------------------------------------+
Get:1 file:/build/criterion-35Iwc1/resolver-8ghHys/apt_archive ./ InRelease
Ign:1 file:/build/criterion-35Iwc1/resolver-8ghHys/apt_archive ./ InRelease
Get:2 file:/build/criterion-35Iwc1/resolver-8ghHys/apt_archive ./ Release [954
B]
Get:2 file:/build/criterion-35Iwc1/resolver-8ghHys/apt_archive ./ Release [954
B]
Get:3 file:/build/criterion-35Iwc1/resolver-8ghHys/apt_archive ./ Release.gpg
Ign:3 file:/build/criterion-35Iwc1/resolver-8ghHys/apt_archive ./ Release.gpg
Get:4 file:/build/criterion-35Iwc1/resolver-8ghHys/apt_archive ./ Packages
[1243 B]
Err:4 file:/build/criterion-35Iwc1/resolver-8ghHys/apt_archive ./ Packages
Could not open file
/build/criterion-35Iwc1/resolver-8ghHys/apt_archive/./Packages - open (13:
Permission denied)
Get:4 file:/build/criterion-35Iwc1/resolver-8ghHys/apt_archive ./ Packages
[3269 B]
Get:5 http://ftp.us.debian.org/debian unstable InRelease [165 kB]
Get:6 http://deb.debian.org/debian experimental InRelease [75.4 kB]
Get:7 http://deb.debian.org/debian experimental/main amd64 Packages [391 kB]
Get:8 http://ftp.us.debian.org/debian unstable/main Sources.diff/Index [63.6 kB]
Get:9 http://ftp.us.debian.org/debian unstable/main amd64 Packages.diff/Index
[63.6 kB]
Get:10 http://ftp.us.debian.org/debian unstable/main Sources
T-2022-04-05-0806.37-F-2022-04-04-0803.45.pdiff [44.0 kB]
Get:10 http://ftp.us.debian.org/debian unstable/main Sources
T-2022-04-05-0806.37-F-2022-04-04-0803.45.pdiff [44.0 kB]
Get:11 http://ftp.us.debian.org/debian unstable/main amd64 Packages
T-2022-04-05-0806.37-F-2022-04-04-0803.45.pdiff [57.1 kB]
Get:11 http://ftp.us.debian.org/debian unstable/main amd64 Packages
T-2022-04-05-0806.37-F-2022-04-04-0803.45.pdiff [57.1 kB]
Fetched 861 kB in 6s (146 kB/s)
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
Calculating upgrade...
The following packages will be upgraded:
apt dpkg dpkg-dev libapt-pkg6.0 libdpkg-perl libgcrypt20 libpcre3 libzstd1
linux-libc-dev
debconf: delaying package configuration, since apt-utils is not installed
9 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/11.9 MB of archives.
After this operation, 136 kB of additional disk space will be used.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 12568 files and directories currently installed.)
Preparing to unpack .../libgcrypt20_1.10.1-2_amd64.deb ...
Unpacking libgcrypt20:amd64 (1.10.1-2) over (1.9.4-5) ...
Setting up libgcrypt20:amd64 (1.10.1-2) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 12568 files and directories currently installed.)
Preparing to unpack .../libzstd1_1.4.10+dfsg-1_amd64.deb ...
Unpacking libzstd1:amd64 (1.4.10+dfsg-1) over (1.4.9+dfsg-1) ...
Setting up libzstd1:amd64 (1.4.10+dfsg-1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 12568 files and directories currently installed.)
Preparing to unpack .../libapt-pkg6.0_2.4.4_amd64.deb ...
Unpacking libapt-pkg6.0:amd64 (2.4.4) over (2.4.3) ...
Setting up libapt-pkg6.0:amd64 (2.4.4) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 12568 files and directories currently installed.)
Preparing to unpack .../archives/dpkg_1.21.7_amd64.deb ...
Unpacking dpkg (1.21.7) over (1.21.6) ...
Setting up dpkg (1.21.7) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 12568 files and directories currently installed.)
Preparing to unpack .../archives/apt_2.4.4_amd64.deb ...
Unpacking apt (2.4.4) over (2.4.3) ...
Setting up apt (2.4.4) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 12568 files and directories currently installed.)
Preparing to unpack .../libpcre3_2%3a8.39-14_amd64.deb ...
Unpacking libpcre3:amd64 (2:8.39-14) over (2:8.39-13) ...
Setting up libpcre3:amd64 (2:8.39-14) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 12568 files and directories currently installed.)
Preparing to unpack .../dpkg-dev_1.21.7_all.deb ...
Unpacking dpkg-dev (1.21.7) over (1.21.6) ...
Preparing to unpack .../libdpkg-perl_1.21.7_all.deb ...
Unpacking libdpkg-perl (1.21.7) over (1.21.6) ...
Preparing to unpack .../linux-libc-dev_5.16.18-1_amd64.deb ...
Unpacking linux-libc-dev:amd64 (5.16.18-1) over (5.16.14-1) ...
Setting up linux-libc-dev:amd64 (5.16.18-1) ...
Setting up libdpkg-perl (1.21.7) ...
Setting up dpkg-dev (1.21.7) ...
Processing triggers for libc-bin (2.33-7) ...
+------------------------------------------------------------------------------+
| Fetch source files |
+------------------------------------------------------------------------------+
Local sources
-------------
/tmp/tmp.4lRJJDjksC/criterion_2.4.0-rc-18-g1cc3911-1.dsc exists in
/tmp/tmp.4lRJJDjksC; copying to chroot
I: NOTICE: Log filtering will replace
'build/criterion-35Iwc1/criterion-2.4.0-rc-18-g1cc3911' with '<<PKGBUILDDIR>>'
I: NOTICE: Log filtering will replace 'build/criterion-35Iwc1' with
'<<BUILDDIR>>'
+------------------------------------------------------------------------------+
| Install package build dependencies |
+------------------------------------------------------------------------------+
Setup apt archive
-----------------
Merged Build-Depends: debhelper-compat (= 12), meson, cmake, libboxfort-dev (>=
0.1.2-2), libnanomsg-dev, libnanopb-dev, nanopb, libgit2-dev, libffi-dev,
protobuf-compiler, python3-protobuf, gettext, build-essential, fakeroot
Filtered Build-Depends: debhelper-compat (= 12), meson, cmake, libboxfort-dev
(>= 0.1.2-2), libnanomsg-dev, libnanopb-dev, nanopb, libgit2-dev, libffi-dev,
protobuf-compiler, python3-protobuf, gettext, build-essential, fakeroot
dpkg-deb: building package 'sbuild-build-depends-main-dummy' in
'/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-main-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [957 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [450 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [535 B]
Fetched 1942 B in 0s (0 B/s)
Reading package lists...
Get:1 file:/<<BUILDDIR>>/resolver-8ghHys/apt_archive ./ InRelease
Ign:1 file:/<<BUILDDIR>>/resolver-8ghHys/apt_archive ./ InRelease
Get:2 file:/<<BUILDDIR>>/resolver-8ghHys/apt_archive ./ Release [954 B]
Get:2 file:/<<BUILDDIR>>/resolver-8ghHys/apt_archive ./ Release [954 B]
Get:3 file:/<<BUILDDIR>>/resolver-8ghHys/apt_archive ./ Release.gpg
Ign:3 file:/<<BUILDDIR>>/resolver-8ghHys/apt_archive ./ Release.gpg
Reading package lists...
Hit:1 http://deb.debian.org/debian experimental InRelease
Reading package lists...
Reading package lists...
Install main build dependencies (apt-based resolver)
----------------------------------------------------
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
autoconf automake autopoint autotools-dev bsdextrautils cmake cmake-data
debhelper dh-autoreconf dh-elpa-helper dh-strip-nondeterminism dwz
emacsen-common file gettext gettext-base groff-base intltool-debian
libarchive-zip-perl libarchive13 libboxfort-dev libbrotli1 libcurl4
libdebhelper-perl libelf1 libexpat1 libffi-dev
libfile-stripnondeterminism-perl libgit2-1.3 libgit2-dev libglib2.0-0
libhttp-parser-dev libhttp-parser2.9 libicu67 libjsoncpp25 libldap-2.5-0
libmagic-mgc libmagic1 libmbedcrypto7 libmbedtls-dev libmbedtls14
libmbedx509-1 libmpdec3 libnanomsg-dev libnanomsg5 libnanopb-dev libncurses6
libncursesw6 libnghttp2-14 libpcre16-3 libpcre3-dev libpcre32-3
libpcrecpp0v5 libpipeline1 libprocps8 libprotobuf23 libprotoc23 libpsl5
libpython3-stdlib libpython3.10-minimal libpython3.10-stdlib libreadline8
librhash0 librtmp1 libsasl2-2 libsasl2-modules-db libsigsegv2 libsqlite3-0
libssh2-1 libssh2-1-dev libssl-dev libsub-override-perl libtool libuchardet0
libuv1 libxml2 m4 man-db media-types meson nanopb ninja-build pkg-config
po-debconf procps protobuf-compiler python3 python3-distutils
python3-lib2to3 python3-minimal python3-pkg-resources python3-protobuf
python3-six python3.10 python3.10-minimal readline-common sensible-utils
zlib1g-dev
Suggested packages:
autoconf-archive gnu-standards autoconf-doc cmake-doc cmake-format dh-make
gettext-doc libasprintf-dev libgettextpo-dev groff lrzip libmbedtls-doc
libssl-doc libtool-doc gfortran | fortran95-compiler gcj-jdk m4-doc apparmor
less www-browser libmail-box-perl protobuf-mode-el python3-doc python3-tk
python3-venv python3-setuptools python3.10-venv python3.10-doc
binfmt-support readline-doc
Recommended packages:
curl | wget | lynx ca-certificates libarchive-cpio-perl libglib2.0-data
shared-mime-info xdg-user-dirs libldap-common libgpm2 publicsuffix
libsasl2-modules libltdl-dev libmail-sendmail-perl psmisc libprotobuf-dev
The following NEW packages will be installed:
autoconf automake autopoint autotools-dev bsdextrautils cmake cmake-data
debhelper dh-autoreconf dh-elpa-helper dh-strip-nondeterminism dwz
emacsen-common file gettext gettext-base groff-base intltool-debian
libarchive-zip-perl libarchive13 libboxfort-dev libbrotli1 libcurl4
libdebhelper-perl libelf1 libexpat1 libffi-dev
libfile-stripnondeterminism-perl libgit2-1.3 libgit2-dev libglib2.0-0
libhttp-parser-dev libhttp-parser2.9 libicu67 libjsoncpp25 libldap-2.5-0
libmagic-mgc libmagic1 libmbedcrypto7 libmbedtls-dev libmbedtls14
libmbedx509-1 libmpdec3 libnanomsg-dev libnanomsg5 libnanopb-dev libncurses6
libncursesw6 libnghttp2-14 libpcre16-3 libpcre3-dev libpcre32-3
libpcrecpp0v5 libpipeline1 libprocps8 libprotobuf23 libprotoc23 libpsl5
libpython3-stdlib libpython3.10-minimal libpython3.10-stdlib libreadline8
librhash0 librtmp1 libsasl2-2 libsasl2-modules-db libsigsegv2 libsqlite3-0
libssh2-1 libssh2-1-dev libssl-dev libsub-override-perl libtool libuchardet0
libuv1 libxml2 m4 man-db media-types meson nanopb ninja-build pkg-config
po-debconf procps protobuf-compiler python3 python3-distutils
python3-lib2to3 python3-minimal python3-pkg-resources python3-protobuf
python3-six python3.10 python3.10-minimal readline-common
sbuild-build-depends-main-dummy sensible-utils zlib1g-dev
0 upgraded, 99 newly installed, 0 to remove and 0 not upgraded.
Need to get 6535 kB/49.3 MB of archives.
After this operation, 183 MB of additional disk space will be used.
Get:1 copy:/<<RESOLVERDIR>>/apt_archive ./ sbuild-build-depends-main-dummy
0.invalid.0 [960 B]
Get:2 file:/<<BUILDDIR>>/resolver-8ghHys/apt_archive ./ libgit2-1.3
1.3.0+dfsg.1-2 [489 kB]
Get:3 file:/<<BUILDDIR>>/resolver-8ghHys/apt_archive ./ libgit2-dev
1.3.0+dfsg.1-2 [794 kB]
Get:4 http://ftp.us.debian.org/debian unstable/main amd64 libmpdec3 amd64
2.5.1-2 [87.8 kB]
Get:5 http://ftp.us.debian.org/debian unstable/main amd64 libsqlite3-0 amd64
3.38.2-1 [829 kB]
Get:6 http://ftp.us.debian.org/debian unstable/main amd64 libpython3.10-stdlib
amd64 3.10.4-3 [1703 kB]
Get:7 http://ftp.us.debian.org/debian unstable/main amd64 python3.10 amd64
3.10.4-3 [536 kB]
Get:8 http://ftp.us.debian.org/debian unstable/main amd64 libpython3-stdlib
amd64 3.10.4-1 [21.7 kB]
Get:9 http://ftp.us.debian.org/debian unstable/main amd64 python3 amd64
3.10.4-1 [38.1 kB]
Get:10 http://ftp.us.debian.org/debian unstable/main amd64 libnanopb-dev amd64
0.4.5-3 [37.9 kB]
Get:11 http://ftp.us.debian.org/debian unstable/main amd64 libprotobuf23 amd64
3.12.4-1+b3 [891 kB]
Get:12 http://ftp.us.debian.org/debian unstable/main amd64 libprotoc23 amd64
3.12.4-1+b3 [787 kB]
Get:13 http://ftp.us.debian.org/debian unstable/main amd64 ninja-build amd64
1.10.1-1 [112 kB]
Get:14 http://ftp.us.debian.org/debian unstable/main amd64
python3-pkg-resources all 59.6.0-1.2 [196 kB]
Get:15 http://ftp.us.debian.org/debian unstable/main amd64 python3-lib2to3 all
3.9.12-1 [79.9 kB]
Get:16 http://ftp.us.debian.org/debian unstable/main amd64 python3-distutils
all 3.9.12-1 [146 kB]
Get:17 http://ftp.us.debian.org/debian unstable/main amd64 meson all 0.62.0-1
[524 kB]
Get:18 http://ftp.us.debian.org/debian unstable/main amd64 protobuf-compiler
amd64 3.12.4-1+b3 [75.5 kB]
Get:19 http://ftp.us.debian.org/debian unstable/main amd64 python3-six all
1.16.0-3 [17.5 kB]
Get:20 http://ftp.us.debian.org/debian unstable/main amd64 python3-protobuf
amd64 3.12.4-1+b3 [404 kB]
Get:21 http://ftp.us.debian.org/debian unstable/main amd64 nanopb all 0.4.5-3
[47.7 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 6535 kB in 51s (129 kB/s)
Selecting previously unselected package libpython3.10-minimal:amd64.
(Reading database ... 12573 files and directories currently installed.)
Preparing to unpack .../libpython3.10-minimal_3.10.4-3_amd64.deb ...
Unpacking libpython3.10-minimal:amd64 (3.10.4-3) ...
Selecting previously unselected package libexpat1:amd64.
Preparing to unpack .../libexpat1_2.4.8-1_amd64.deb ...
Unpacking libexpat1:amd64 (2.4.8-1) ...
Selecting previously unselected package python3.10-minimal.
Preparing to unpack .../python3.10-minimal_3.10.4-3_amd64.deb ...
Unpacking python3.10-minimal (3.10.4-3) ...
Setting up libpython3.10-minimal:amd64 (3.10.4-3) ...
Setting up libexpat1:amd64 (2.4.8-1) ...
Setting up python3.10-minimal (3.10.4-3) ...
Selecting previously unselected package python3-minimal.
(Reading database ... 12876 files and directories currently installed.)
Preparing to unpack .../0-python3-minimal_3.10.4-1_amd64.deb ...
Unpacking python3-minimal (3.10.4-1) ...
Selecting previously unselected package media-types.
Preparing to unpack .../1-media-types_7.0.0_all.deb ...
Unpacking media-types (7.0.0) ...
Selecting previously unselected package libmpdec3:amd64.
Preparing to unpack .../2-libmpdec3_2.5.1-2_amd64.deb ...
Unpacking libmpdec3:amd64 (2.5.1-2) ...
Selecting previously unselected package libncursesw6:amd64.
Preparing to unpack .../3-libncursesw6_6.3-2_amd64.deb ...
Unpacking libncursesw6:amd64 (6.3-2) ...
Selecting previously unselected package readline-common.
Preparing to unpack .../4-readline-common_8.1.2-1_all.deb ...
Unpacking readline-common (8.1.2-1) ...
Selecting previously unselected package libreadline8:amd64.
Preparing to unpack .../5-libreadline8_8.1.2-1_amd64.deb ...
Unpacking libreadline8:amd64 (8.1.2-1) ...
Selecting previously unselected package libsqlite3-0:amd64.
Preparing to unpack .../6-libsqlite3-0_3.38.2-1_amd64.deb ...
Unpacking libsqlite3-0:amd64 (3.38.2-1) ...
Selecting previously unselected package libpython3.10-stdlib:amd64.
Preparing to unpack .../7-libpython3.10-stdlib_3.10.4-3_amd64.deb ...
Unpacking libpython3.10-stdlib:amd64 (3.10.4-3) ...
Selecting previously unselected package python3.10.
Preparing to unpack .../8-python3.10_3.10.4-3_amd64.deb ...
Unpacking python3.10 (3.10.4-3) ...
Selecting previously unselected package libpython3-stdlib:amd64.
Preparing to unpack .../9-libpython3-stdlib_3.10.4-1_amd64.deb ...
Unpacking libpython3-stdlib:amd64 (3.10.4-1) ...
Setting up python3-minimal (3.10.4-1) ...
Selecting previously unselected package python3.
(Reading database ... 13319 files and directories currently installed.)
Preparing to unpack .../00-python3_3.10.4-1_amd64.deb ...
Unpacking python3 (3.10.4-1) ...
Selecting previously unselected package libncurses6:amd64.
Preparing to unpack .../01-libncurses6_6.3-2_amd64.deb ...
Unpacking libncurses6:amd64 (6.3-2) ...
Selecting previously unselected package libprocps8:amd64.
Preparing to unpack .../02-libprocps8_2%3a3.3.17-7+b1_amd64.deb ...
Unpacking libprocps8:amd64 (2:3.3.17-7+b1) ...
Selecting previously unselected package procps.
Preparing to unpack .../03-procps_2%3a3.3.17-7+b1_amd64.deb ...
Unpacking procps (2:3.3.17-7+b1) ...
Selecting previously unselected package sensible-utils.
Preparing to unpack .../04-sensible-utils_0.0.17_all.deb ...
Unpacking sensible-utils (0.0.17) ...
Selecting previously unselected package libmagic-mgc.
Preparing to unpack .../05-libmagic-mgc_1%3a5.41-3_amd64.deb ...
Unpacking libmagic-mgc (1:5.41-3) ...
Selecting previously unselected package libmagic1:amd64.
Preparing to unpack .../06-libmagic1_1%3a5.41-3_amd64.deb ...
Unpacking libmagic1:amd64 (1:5.41-3) ...
Selecting previously unselected package file.
Preparing to unpack .../07-file_1%3a5.41-3_amd64.deb ...
Unpacking file (1:5.41-3) ...
Selecting previously unselected package gettext-base.
Preparing to unpack .../08-gettext-base_0.21-6_amd64.deb ...
Unpacking gettext-base (0.21-6) ...
Selecting previously unselected package libuchardet0:amd64.
Preparing to unpack .../09-libuchardet0_0.0.7-1_amd64.deb ...
Unpacking libuchardet0:amd64 (0.0.7-1) ...
Selecting previously unselected package groff-base.
Preparing to unpack .../10-groff-base_1.22.4-8_amd64.deb ...
Unpacking groff-base (1.22.4-8) ...
Selecting previously unselected package bsdextrautils.
Preparing to unpack .../11-bsdextrautils_2.37.3-1+b1_amd64.deb ...
Unpacking bsdextrautils (2.37.3-1+b1) ...
Selecting previously unselected package libpipeline1:amd64.
Preparing to unpack .../12-libpipeline1_1.5.5-1_amd64.deb ...
Unpacking libpipeline1:amd64 (1.5.5-1) ...
Selecting previously unselected package man-db.
Preparing to unpack .../13-man-db_2.10.2-1_amd64.deb ...
Unpacking man-db (2.10.2-1) ...
Selecting previously unselected package libsigsegv2:amd64.
Preparing to unpack .../14-libsigsegv2_2.14-1_amd64.deb ...
Unpacking libsigsegv2:amd64 (2.14-1) ...
Selecting previously unselected package m4.
Preparing to unpack .../15-m4_1.4.18-5_amd64.deb ...
Unpacking m4 (1.4.18-5) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../16-autoconf_2.71-2_all.deb ...
Unpacking autoconf (2.71-2) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../17-autotools-dev_20220109.1_all.deb ...
Unpacking autotools-dev (20220109.1) ...
Selecting previously unselected package automake.
Preparing to unpack .../18-automake_1%3a1.16.5-1.3_all.deb ...
Unpacking automake (1:1.16.5-1.3) ...
Selecting previously unselected package autopoint.
Preparing to unpack .../19-autopoint_0.21-6_all.deb ...
Unpacking autopoint (0.21-6) ...
Selecting previously unselected package libicu67:amd64.
Preparing to unpack .../20-libicu67_67.1-7_amd64.deb ...
Unpacking libicu67:amd64 (67.1-7) ...
Selecting previously unselected package libxml2:amd64.
Preparing to unpack .../21-libxml2_2.9.13+dfsg-1_amd64.deb ...
Unpacking libxml2:amd64 (2.9.13+dfsg-1) ...
Selecting previously unselected package libarchive13:amd64.
Preparing to unpack .../22-libarchive13_3.6.0-1_amd64.deb ...
Unpacking libarchive13:amd64 (3.6.0-1) ...
Selecting previously unselected package libbrotli1:amd64.
Preparing to unpack .../23-libbrotli1_1.0.9-2+b3_amd64.deb ...
Unpacking libbrotli1:amd64 (1.0.9-2+b3) ...
Selecting previously unselected package libsasl2-modules-db:amd64.
Preparing to unpack .../24-libsasl2-modules-db_2.1.28+dfsg-2+b1_amd64.deb ...
Unpacking libsasl2-modules-db:amd64 (2.1.28+dfsg-2+b1) ...
Selecting previously unselected package libsasl2-2:amd64.
Preparing to unpack .../25-libsasl2-2_2.1.28+dfsg-2+b1_amd64.deb ...
Unpacking libsasl2-2:amd64 (2.1.28+dfsg-2+b1) ...
Selecting previously unselected package libldap-2.5-0:amd64.
Preparing to unpack .../26-libldap-2.5-0_2.5.11+dfsg-1_amd64.deb ...
Unpacking libldap-2.5-0:amd64 (2.5.11+dfsg-1) ...
Selecting previously unselected package libnghttp2-14:amd64.
Preparing to unpack .../27-libnghttp2-14_1.43.0-1_amd64.deb ...
Unpacking libnghttp2-14:amd64 (1.43.0-1) ...
Selecting previously unselected package libpsl5:amd64.
Preparing to unpack .../28-libpsl5_0.21.0-1.2_amd64.deb ...
Unpacking libpsl5:amd64 (0.21.0-1.2) ...
Selecting previously unselected package librtmp1:amd64.
Preparing to unpack .../29-librtmp1_2.4+20151223.gitfa8646d.1-2+b2_amd64.deb ...
Unpacking librtmp1:amd64 (2.4+20151223.gitfa8646d.1-2+b2) ...
Selecting previously unselected package libssh2-1:amd64.
Preparing to unpack .../30-libssh2-1_1.10.0-3_amd64.deb ...
Unpacking libssh2-1:amd64 (1.10.0-3) ...
Selecting previously unselected package libcurl4:amd64.
Preparing to unpack .../31-libcurl4_7.82.0-2_amd64.deb ...
Unpacking libcurl4:amd64 (7.82.0-2) ...
Selecting previously unselected package libjsoncpp25:amd64.
Preparing to unpack .../32-libjsoncpp25_1.9.5-4_amd64.deb ...
Unpacking libjsoncpp25:amd64 (1.9.5-4) ...
Selecting previously unselected package librhash0:amd64.
Preparing to unpack .../33-librhash0_1.4.2-1_amd64.deb ...
Unpacking librhash0:amd64 (1.4.2-1) ...
Selecting previously unselected package libuv1:amd64.
Preparing to unpack .../34-libuv1_1.44.1-2_amd64.deb ...
Unpacking libuv1:amd64 (1.44.1-2) ...
Selecting previously unselected package dh-elpa-helper.
Preparing to unpack .../35-dh-elpa-helper_2.0.10_all.deb ...
Unpacking dh-elpa-helper (2.0.10) ...
Selecting previously unselected package emacsen-common.
Preparing to unpack .../36-emacsen-common_3.0.4_all.deb ...
Unpacking emacsen-common (3.0.4) ...
Selecting previously unselected package cmake-data.
Preparing to unpack .../37-cmake-data_3.23.0-1_all.deb ...
Unpacking cmake-data (3.23.0-1) ...
Selecting previously unselected package cmake.
Preparing to unpack .../38-cmake_3.23.0-1_amd64.deb ...
Unpacking cmake (3.23.0-1) ...
Selecting previously unselected package libdebhelper-perl.
Preparing to unpack .../39-libdebhelper-perl_13.6_all.deb ...
Unpacking libdebhelper-perl (13.6) ...
Selecting previously unselected package libtool.
Preparing to unpack .../40-libtool_2.4.7-2_all.deb ...
Unpacking libtool (2.4.7-2) ...
Selecting previously unselected package dh-autoreconf.
Preparing to unpack .../41-dh-autoreconf_20_all.deb ...
Unpacking dh-autoreconf (20) ...
Selecting previously unselected package libarchive-zip-perl.
Preparing to unpack .../42-libarchive-zip-perl_1.68-1_all.deb ...
Unpacking libarchive-zip-perl (1.68-1) ...
Selecting previously unselected package libsub-override-perl.
Preparing to unpack .../43-libsub-override-perl_0.09-2_all.deb ...
Unpacking libsub-override-perl (0.09-2) ...
Selecting previously unselected package libfile-stripnondeterminism-perl.
Preparing to unpack .../44-libfile-stripnondeterminism-perl_1.13.0-1_all.deb ...
Unpacking libfile-stripnondeterminism-perl (1.13.0-1) ...
Selecting previously unselected package dh-strip-nondeterminism.
Preparing to unpack .../45-dh-strip-nondeterminism_1.13.0-1_all.deb ...
Unpacking dh-strip-nondeterminism (1.13.0-1) ...
Selecting previously unselected package libelf1:amd64.
Preparing to unpack .../46-libelf1_0.186-1_amd64.deb ...
Unpacking libelf1:amd64 (0.186-1) ...
Selecting previously unselected package dwz.
Preparing to unpack .../47-dwz_0.14-1_amd64.deb ...
Unpacking dwz (0.14-1) ...
Selecting previously unselected package gettext.
Preparing to unpack .../48-gettext_0.21-6_amd64.deb ...
Unpacking gettext (0.21-6) ...
Selecting previously unselected package intltool-debian.
Preparing to unpack .../49-intltool-debian_0.35.0+20060710.5_all.deb ...
Unpacking intltool-debian (0.35.0+20060710.5) ...
Selecting previously unselected package po-debconf.
Preparing to unpack .../50-po-debconf_1.0.21+nmu1_all.deb ...
Unpacking po-debconf (1.0.21+nmu1) ...
Selecting previously unselected package debhelper.
Preparing to unpack .../51-debhelper_13.6_all.deb ...
Unpacking debhelper (13.6) ...
Selecting previously unselected package libglib2.0-0:amd64.
Preparing to unpack .../52-libglib2.0-0_2.72.0-1+b1_amd64.deb ...
Unpacking libglib2.0-0:amd64 (2.72.0-1+b1) ...
Selecting previously unselected package pkg-config.
Preparing to unpack .../53-pkg-config_0.29.2-1_amd64.deb ...
Unpacking pkg-config (0.29.2-1) ...
Selecting previously unselected package libboxfort-dev:amd64.
Preparing to unpack .../54-libboxfort-dev_0.1.2-2_amd64.deb ...
Unpacking libboxfort-dev:amd64 (0.1.2-2) ...
Selecting previously unselected package libffi-dev:amd64.
Preparing to unpack .../55-libffi-dev_3.4.2-4_amd64.deb ...
Unpacking libffi-dev:amd64 (3.4.2-4) ...
Selecting previously unselected package libhttp-parser2.9:amd64.
Preparing to unpack .../56-libhttp-parser2.9_2.9.4-4_amd64.deb ...
Unpacking libhttp-parser2.9:amd64 (2.9.4-4) ...
Selecting previously unselected package libmbedcrypto7:amd64.
Preparing to unpack .../57-libmbedcrypto7_2.28.0-1_amd64.deb ...
Unpacking libmbedcrypto7:amd64 (2.28.0-1) ...
Selecting previously unselected package libmbedx509-1:amd64.
Preparing to unpack .../58-libmbedx509-1_2.28.0-1_amd64.deb ...
Unpacking libmbedx509-1:amd64 (2.28.0-1) ...
Selecting previously unselected package libmbedtls14:amd64.
Preparing to unpack .../59-libmbedtls14_2.28.0-1_amd64.deb ...
Unpacking libmbedtls14:amd64 (2.28.0-1) ...
Selecting previously unselected package libgit2-1.3:amd64.
Preparing to unpack .../60-libgit2-1.3_1.3.0+dfsg.1-2_amd64.deb ...
Unpacking libgit2-1.3:amd64 (1.3.0+dfsg.1-2) ...
Selecting previously unselected package zlib1g-dev:amd64.
Preparing to unpack .../61-zlib1g-dev_1%3a1.2.11.dfsg-4_amd64.deb ...
Unpacking zlib1g-dev:amd64 (1:1.2.11.dfsg-4) ...
Selecting previously unselected package libmbedtls-dev:amd64.
Preparing to unpack .../62-libmbedtls-dev_2.28.0-1_amd64.deb ...
Unpacking libmbedtls-dev:amd64 (2.28.0-1) ...
Selecting previously unselected package libssl-dev:amd64.
Preparing to unpack .../63-libssl-dev_1.1.1n-1_amd64.deb ...
Unpacking libssl-dev:amd64 (1.1.1n-1) ...
Selecting previously unselected package libssh2-1-dev:amd64.
Preparing to unpack .../64-libssh2-1-dev_1.10.0-3_amd64.deb ...
Unpacking libssh2-1-dev:amd64 (1.10.0-3) ...
Selecting previously unselected package libhttp-parser-dev.
Preparing to unpack .../65-libhttp-parser-dev_2.9.4-4_amd64.deb ...
Unpacking libhttp-parser-dev (2.9.4-4) ...
Selecting previously unselected package libpcre16-3:amd64.
Preparing to unpack .../66-libpcre16-3_2%3a8.39-14_amd64.deb ...
Unpacking libpcre16-3:amd64 (2:8.39-14) ...
Selecting previously unselected package libpcre32-3:amd64.
Preparing to unpack .../67-libpcre32-3_2%3a8.39-14_amd64.deb ...
Unpacking libpcre32-3:amd64 (2:8.39-14) ...
Selecting previously unselected package libpcrecpp0v5:amd64.
Preparing to unpack .../68-libpcrecpp0v5_2%3a8.39-14_amd64.deb ...
Unpacking libpcrecpp0v5:amd64 (2:8.39-14) ...
Selecting previously unselected package libpcre3-dev:amd64.
Preparing to unpack .../69-libpcre3-dev_2%3a8.39-14_amd64.deb ...
Unpacking libpcre3-dev:amd64 (2:8.39-14) ...
Selecting previously unselected package libgit2-dev:amd64.
Preparing to unpack .../70-libgit2-dev_1.3.0+dfsg.1-2_amd64.deb ...
Unpacking libgit2-dev:amd64 (1.3.0+dfsg.1-2) ...
Selecting previously unselected package libnanomsg5.
Preparing to unpack .../71-libnanomsg5_1.1.5+dfsg-1+b2_amd64.deb ...
Unpacking libnanomsg5 (1.1.5+dfsg-1+b2) ...
Selecting previously unselected package libnanomsg-dev.
Preparing to unpack .../72-libnanomsg-dev_1.1.5+dfsg-1+b2_amd64.deb ...
Unpacking libnanomsg-dev (1.1.5+dfsg-1+b2) ...
Selecting previously unselected package libnanopb-dev:amd64.
Preparing to unpack .../73-libnanopb-dev_0.4.5-3_amd64.deb ...
Unpacking libnanopb-dev:amd64 (0.4.5-3) ...
Selecting previously unselected package libprotobuf23:amd64.
Preparing to unpack .../74-libprotobuf23_3.12.4-1+b3_amd64.deb ...
Unpacking libprotobuf23:amd64 (3.12.4-1+b3) ...
Selecting previously unselected package libprotoc23:amd64.
Preparing to unpack .../75-libprotoc23_3.12.4-1+b3_amd64.deb ...
Unpacking libprotoc23:amd64 (3.12.4-1+b3) ...
Selecting previously unselected package ninja-build.
Preparing to unpack .../76-ninja-build_1.10.1-1_amd64.deb ...
Unpacking ninja-build (1.10.1-1) ...
Selecting previously unselected package python3-pkg-resources.
Preparing to unpack .../77-python3-pkg-resources_59.6.0-1.2_all.deb ...
Unpacking python3-pkg-resources (59.6.0-1.2) ...
Selecting previously unselected package python3-lib2to3.
Preparing to unpack .../78-python3-lib2to3_3.9.12-1_all.deb ...
Unpacking python3-lib2to3 (3.9.12-1) ...
Selecting previously unselected package python3-distutils.
Preparing to unpack .../79-python3-distutils_3.9.12-1_all.deb ...
Unpacking python3-distutils (3.9.12-1) ...
Selecting previously unselected package meson.
Preparing to unpack .../80-meson_0.62.0-1_all.deb ...
Unpacking meson (0.62.0-1) ...
Selecting previously unselected package protobuf-compiler.
Preparing to unpack .../81-protobuf-compiler_3.12.4-1+b3_amd64.deb ...
Unpacking protobuf-compiler (3.12.4-1+b3) ...
Selecting previously unselected package python3-six.
Preparing to unpack .../82-python3-six_1.16.0-3_all.deb ...
Unpacking python3-six (1.16.0-3) ...
Selecting previously unselected package python3-protobuf.
Preparing to unpack .../83-python3-protobuf_3.12.4-1+b3_amd64.deb ...
Unpacking python3-protobuf (3.12.4-1+b3) ...
Selecting previously unselected package nanopb.
Preparing to unpack .../84-nanopb_0.4.5-3_all.deb ...
Unpacking nanopb (0.4.5-3) ...
Selecting previously unselected package sbuild-build-depends-main-dummy.
Preparing to unpack
.../85-sbuild-build-depends-main-dummy_0.invalid.0_amd64.deb ...
Unpacking sbuild-build-depends-main-dummy (0.invalid.0) ...
Setting up media-types (7.0.0) ...
Setting up libpcrecpp0v5:amd64 (2:8.39-14) ...
Setting up libpipeline1:amd64 (1.5.5-1) ...
Setting up libpsl5:amd64 (0.21.0-1.2) ...
Setting up bsdextrautils (2.37.3-1+b1) ...
Setting up libpcre16-3:amd64 (2:8.39-14) ...
Setting up libnanomsg5 (1.1.5+dfsg-1+b2) ...
Setting up libicu67:amd64 (67.1-7) ...
Setting up libmagic-mgc (1:5.41-3) ...
Setting up libarchive-zip-perl (1.68-1) ...
Setting up libglib2.0-0:amd64 (2.72.0-1+b1) ...
No schema files found: doing nothing.
Setting up libdebhelper-perl (13.6) ...
Setting up libbrotli1:amd64 (1.0.9-2+b3) ...
Setting up libsqlite3-0:amd64 (3.38.2-1) ...
Setting up libnghttp2-14:amd64 (1.43.0-1) ...
Setting up libmagic1:amd64 (1:5.41-3) ...
Setting up gettext-base (0.21-6) ...
Setting up libprotobuf23:amd64 (3.12.4-1+b3) ...
Setting up file (1:5.41-3) ...
Setting up libffi-dev:amd64 (3.4.2-4) ...
Setting up ninja-build (1.10.1-1) ...
Setting up libsasl2-modules-db:amd64 (2.1.28+dfsg-2+b1) ...
Setting up autotools-dev (20220109.1) ...
Setting up libuv1:amd64 (1.44.1-2) ...
Setting up emacsen-common (3.0.4) ...
Setting up libmbedcrypto7:amd64 (2.28.0-1) ...
Setting up librtmp1:amd64 (2.4+20151223.gitfa8646d.1-2+b2) ...
Setting up dh-elpa-helper (2.0.10) ...
Setting up libprotoc23:amd64 (3.12.4-1+b3) ...
Setting up libncurses6:amd64 (6.3-2) ...
Setting up libsigsegv2:amd64 (2.14-1) ...
Setting up libssl-dev:amd64 (1.1.1n-1) ...
Setting up libpcre32-3:amd64 (2:8.39-14) ...
Setting up autopoint (0.21-6) ...
Setting up libjsoncpp25:amd64 (1.9.5-4) ...
Setting up pkg-config (0.29.2-1) ...
Setting up libncursesw6:amd64 (6.3-2) ...
Setting up libsasl2-2:amd64 (2.1.28+dfsg-2+b1) ...
Setting up zlib1g-dev:amd64 (1:1.2.11.dfsg-4) ...
Setting up libnanopb-dev:amd64 (0.4.5-3) ...
Setting up sensible-utils (0.0.17) ...
Setting up librhash0:amd64 (1.4.2-1) ...
Setting up libuchardet0:amd64 (0.0.7-1) ...
Setting up libnanomsg-dev (1.1.5+dfsg-1+b2) ...
Setting up libmpdec3:amd64 (2.5.1-2) ...
Setting up libsub-override-perl (0.09-2) ...
Setting up libssh2-1:amd64 (1.10.0-3) ...
Setting up cmake-data (3.23.0-1) ...
Setting up libelf1:amd64 (0.186-1) ...
Setting up readline-common (8.1.2-1) ...
Setting up libxml2:amd64 (2.9.13+dfsg-1) ...
Setting up libprocps8:amd64 (2:3.3.17-7+b1) ...
Setting up libhttp-parser2.9:amd64 (2.9.4-4) ...
Setting up libfile-stripnondeterminism-perl (1.13.0-1) ...
Setting up libhttp-parser-dev (2.9.4-4) ...
Setting up gettext (0.21-6) ...
Setting up libmbedx509-1:amd64 (2.28.0-1) ...
Setting up protobuf-compiler (3.12.4-1+b3) ...
Setting up libmbedtls14:amd64 (2.28.0-1) ...
Setting up libtool (2.4.7-2) ...
Setting up libarchive13:amd64 (3.6.0-1) ...
Setting up libpcre3-dev:amd64 (2:8.39-14) ...
Setting up libboxfort-dev:amd64 (0.1.2-2) ...
Setting up libreadline8:amd64 (8.1.2-1) ...
Setting up m4 (1.4.18-5) ...
Setting up libmbedtls-dev:amd64 (2.28.0-1) ...
Setting up libldap-2.5-0:amd64 (2.5.11+dfsg-1) ...
Setting up intltool-debian (0.35.0+20060710.5) ...
Setting up libpython3.10-stdlib:amd64 (3.10.4-3) ...
Setting up libssh2-1-dev:amd64 (1.10.0-3) ...
Setting up autoconf (2.71-2) ...
Setting up dh-strip-nondeterminism (1.13.0-1) ...
Setting up dwz (0.14-1) ...
Setting up groff-base (1.22.4-8) ...
Setting up procps (2:3.3.17-7+b1) ...
Setting up libcurl4:amd64 (7.82.0-2) ...
Setting up libpython3-stdlib:amd64 (3.10.4-1) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake
(automake) in auto mode
Setting up libgit2-1.3:amd64 (1.3.0+dfsg.1-2) ...
Setting up python3.10 (3.10.4-3) ...
Setting up po-debconf (1.0.21+nmu1) ...
Setting up python3 (3.10.4-1) ...
Setting up man-db (2.10.2-1) ...
Not building database; man-db/auto-update is not 'true'.
Setting up python3-six (1.16.0-3) ...
Setting up dh-autoreconf (20) ...
Setting up cmake (3.23.0-1) ...
Setting up python3-lib2to3 (3.9.12-1) ...
Setting up libgit2-dev:amd64 (1.3.0+dfsg.1-2) ...
Setting up python3-pkg-resources (59.6.0-1.2) ...
Setting up python3-distutils (3.9.12-1) ...
Setting up meson (0.62.0-1) ...
Setting up debhelper (13.6) ...
Setting up python3-protobuf (3.12.4-1+b3) ...
Setting up nanopb (0.4.5-3) ...
Setting up sbuild-build-depends-main-dummy (0.invalid.0) ...
Processing triggers for libc-bin (2.33-7) ...
+------------------------------------------------------------------------------+
| Check architectures |
+------------------------------------------------------------------------------+
Arch check ok (amd64 included in amd64 arm64 i386)
+------------------------------------------------------------------------------+
| Build environment |
+------------------------------------------------------------------------------+
Kernel: Linux 5.16.0-6-amd64 #1 SMP PREEMPT Debian 5.16.18-1 (2022-03-29) amd64
(x86_64)
Toolchain package versions: binutils_2.38-3 dpkg-dev_1.21.7 g++-11_11.2.0-19
gcc-11_11.2.0-19 libc6-dev_2.33-7 libstdc++-11-dev_11.2.0-19
libstdc++6_12-20220319-1 linux-libc-dev_5.16.18-1
Package versions: adduser_3.121 apt_2.4.4 autoconf_2.71-2 automake_1:1.16.5-1.3
autopoint_0.21-6 autotools-dev_20220109.1 base-files_12.2 base-passwd_3.5.52
bash_5.1-6 binutils_2.38-3 binutils-common_2.38-3
binutils-x86-64-linux-gnu_2.38-3 bsdextrautils_2.37.3-1+b1
bsdutils_1:2.37.3-1+b1 build-essential_12.9 bzip2_1.0.8-5 ccache_4.6-1
cmake_3.23.0-1 cmake-data_3.23.0-1 coreutils_8.32-4.1 cpp_4:11.2.0-2
cpp-11_11.2.0-19 dash_0.5.11+git20210903+057cd650a4ed-8 debconf_1.5.79
debhelper_13.6 debian-archive-keyring_2021.1.1 debianutils_5.7-0.1
dh-autoreconf_20 dh-elpa-helper_2.0.10 dh-strip-nondeterminism_1.13.0-1
diffutils_1:3.7-5 dpkg_1.21.7 dpkg-dev_1.21.7 dwz_0.14-1 e2fsprogs_1.46.5-2
eatmydata_130-2 emacsen-common_3.0.4 fakeroot_1.28-1 file_1:5.41-3
findutils_4.9.0-2 g++_4:11.2.0-2 g++-11_11.2.0-19 gcc_4:11.2.0-2
gcc-11_11.2.0-19 gcc-11-base_11.2.0-19 gcc-12-base_12-20220319-1
gcc-9-base_9.4.0-5 gettext_0.21-6 gettext-base_0.21-6 gpgv_2.2.27-3+b1
grep_3.7-1 groff-base_1.22.4-8 gzip_1.10-4 hostname_3.23
init-system-helpers_1.62 intltool-debian_0.35.0+20060710.5 libacl1_2.3.1-1
libapt-pkg6.0_2.4.4 libarchive-zip-perl_1.68-1 libarchive13_3.6.0-1
libasan6_11.2.0-19 libatomic1_12-20220319-1 libattr1_1:2.5.1-1
libaudit-common_1:3.0.7-1 libaudit1_1:3.0.7-1+b1 libbinutils_2.38-3
libblkid1_2.37.3-1+b1 libboxfort-dev_0.1.2-2 libbrotli1_1.0.9-2+b3
libbz2-1.0_1.0.8-5 libc-bin_2.33-7 libc-dev-bin_2.33-7 libc6_2.33-7
libc6-dev_2.33-7 libcap-ng0_0.7.9-2.2+b2 libcap2_1:2.44-1
libcc1-0_12-20220319-1 libcom-err2_1.46.5-2 libcrypt-dev_1:4.4.27-1.1
libcrypt1_1:4.4.27-1.1 libctf-nobfd0_2.38-3 libctf0_2.38-3 libcurl4_7.82.0-2
libdb5.3_5.3.28+dfsg1-0.8 libdebconfclient0_0.261 libdebhelper-perl_13.6
libdpkg-perl_1.21.7 libeatmydata1_130-2 libelf1_0.186-1 libexpat1_2.4.8-1
libext2fs2_1.46.5-2 libfakeroot_1.28-1 libffi-dev_3.4.2-4 libffi8_3.4.2-4
libfile-stripnondeterminism-perl_1.13.0-1 libgcc-11-dev_11.2.0-19
libgcc-s1_12-20220319-1 libgcrypt20_1.10.1-2 libgdbm-compat4_1.23-1
libgdbm6_1.23-1 libgit2-1.3_1.3.0+dfsg.1-2 libgit2-dev_1.3.0+dfsg.1-2
libglib2.0-0_2.72.0-1+b1 libgmp10_2:6.2.1+dfsg-3 libgnutls30_3.7.3-4+b1
libgomp1_12-20220319-1 libgpg-error0_1.43-3 libgssapi-krb5-2_1.19.2-2+b1
libhiredis0.14_0.14.1-2 libhogweed6_3.7.3-1 libhttp-parser-dev_2.9.4-4
libhttp-parser2.9_2.9.4-4 libicu67_67.1-7 libidn2-0_2.3.2-2 libisl23_0.24-2
libitm1_12-20220319-1 libjsoncpp25_1.9.5-4 libk5crypto3_1.19.2-2+b1
libkeyutils1_1.6.1-3 libkrb5-3_1.19.2-2+b1 libkrb5support0_1.19.2-2+b1
libldap-2.5-0_2.5.11+dfsg-1 liblsan0_12-20220319-1 liblz4-1_1.9.3-2
liblzma5_5.2.5-2 libmagic-mgc_1:5.41-3 libmagic1_1:5.41-3
libmbedcrypto7_2.28.0-1 libmbedtls-dev_2.28.0-1 libmbedtls14_2.28.0-1
libmbedx509-1_2.28.0-1 libmount1_2.37.3-1+b1 libmpc3_1.2.1-2 libmpdec3_2.5.1-2
libmpfr6_4.1.0-3 libnanomsg-dev_1.1.5+dfsg-1+b2 libnanomsg5_1.1.5+dfsg-1+b2
libnanopb-dev_0.4.5-3 libncurses6_6.3-2 libncursesw6_6.3-2 libnettle8_3.7.3-1
libnghttp2-14_1.43.0-1 libnsl-dev_1.3.0-2 libnsl2_1.3.0-2 libp11-kit0_0.24.0-6
libpam-modules_1.4.0-11 libpam-modules-bin_1.4.0-11 libpam-runtime_1.4.0-11
libpam0g_1.4.0-11 libpcre16-3_2:8.39-14 libpcre2-8-0_10.39-3 libpcre3_2:8.39-14
libpcre3-dev_2:8.39-14 libpcre32-3_2:8.39-14 libpcrecpp0v5_2:8.39-14
libperl5.34_5.34.0-3 libpipeline1_1.5.5-1 libprocps8_2:3.3.17-7+b1
libprotobuf23_3.12.4-1+b3 libprotoc23_3.12.4-1+b3 libpsl5_0.21.0-1.2
libpython3-stdlib_3.10.4-1 libpython3.10-minimal_3.10.4-3
libpython3.10-stdlib_3.10.4-3 libquadmath0_12-20220319-1 libreadline8_8.1.2-1
librhash0_1.4.2-1 librtmp1_2.4+20151223.gitfa8646d.1-2+b2
libsasl2-2_2.1.28+dfsg-2+b1 libsasl2-modules-db_2.1.28+dfsg-2+b1
libseccomp2_2.5.3-2 libselinux1_3.3-1+b2 libsemanage-common_3.3-1
libsemanage2_3.3-1+b2 libsepol2_3.3-1 libsigsegv2_2.14-1
libsmartcols1_2.37.3-1+b1 libsqlite3-0_3.38.2-1 libss2_1.46.5-2
libssh2-1_1.10.0-3 libssh2-1-dev_1.10.0-3 libssl-dev_1.1.1n-1
libssl1.1_1.1.1n-1 libstdc++-11-dev_11.2.0-19 libstdc++6_12-20220319-1
libsub-override-perl_0.09-2 libsystemd0_250.4-1 libtasn1-6_4.18.0-4
libtinfo6_6.3-2 libtirpc-common_1.3.2-2 libtirpc-dev_1.3.2-2 libtirpc3_1.3.2-2
libtool_2.4.7-2 libtsan0_11.2.0-19 libubsan1_12-20220319-1 libuchardet0_0.0.7-1
libudev1_250.4-1 libunistring2_1.0-1 libuuid1_2.37.3-1+b1 libuv1_1.44.1-2
libxml2_2.9.13+dfsg-1 libxxhash0_0.8.1-1 libzstd1_1.4.10+dfsg-1
linux-libc-dev_5.16.18-1 login_1:4.11.1+dfsg1-2 logsave_1.46.5-2
lsb-base_11.1.0 m4_1.4.18-5 make_4.3-4.1 man-db_2.10.2-1
mawk_1.3.4.20200120-3+b1 media-types_7.0.0 meson_0.62.0-1 mount_2.37.3-1+b1
nanopb_0.4.5-3 ncurses-base_6.3-2 ncurses-bin_6.3-2 ninja-build_1.10.1-1
passwd_1:4.11.1+dfsg1-2 patch_2.7.6-7 perl_5.34.0-3 perl-base_5.34.0-3
perl-modules-5.34_5.34.0-3 pkg-config_0.29.2-1 po-debconf_1.0.21+nmu1
procps_2:3.3.17-7+b1 protobuf-compiler_3.12.4-1+b3 python3_3.10.4-1
python3-distutils_3.9.12-1 python3-lib2to3_3.9.12-1 python3-minimal_3.10.4-1
python3-pkg-resources_59.6.0-1.2 python3-protobuf_3.12.4-1+b3
python3-six_1.16.0-3 python3.10_3.10.4-3 python3.10-minimal_3.10.4-3
readline-common_8.1.2-1 rpcsvc-proto_1.4.2-4
sbuild-build-depends-main-dummy_0.invalid.0 sed_4.8-1 sensible-utils_0.0.17
sysvinit-utils_3.01-1 tar_1.34+dfsg-1 tzdata_2022a-1 util-linux_2.37.3-1+b1
xz-utils_5.2.5-2 zlib1g_1:1.2.11.dfsg-4 zlib1g-dev_1:1.2.11.dfsg-4
+------------------------------------------------------------------------------+
| Build |
+------------------------------------------------------------------------------+
Unpack source
-------------
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 3.0 (quilt)
Source: criterion
Binary: libcriterion3, libcriterion-dev
Architecture: amd64 arm64 i386
Version: 2.4.0-rc-18-g1cc3911-1
Maintainer: SZALAY Attila <s...@debian.org>
Homepage: https://github.com/Snaipe/Criterion
Standards-Version: 4.3.0
Vcs-Browser: https://salsa.debian.org/sasa/criterion
Vcs-Git: https://salsa.debian.org/sasa/criterion.git
Testsuite: autopkgtest
Testsuite-Triggers: build-essential
Build-Depends: debhelper-compat (= 12), meson, cmake, libboxfort-dev (>=
0.1.2-2), libnanomsg-dev, libnanopb-dev, nanopb, libgit2-dev, libffi-dev,
protobuf-compiler, python3-protobuf, gettext
Package-List:
libcriterion-dev deb libdevel optional arch=amd64,arm64,i386
libcriterion3 deb libs optional arch=amd64,arm64,i386
Checksums-Sha1:
8bdb04a2cbbeffb8bcd17e82f60397304dae7449 870192
criterion_2.4.0-rc-18-g1cc3911.orig.tar.gz
fc106904183b8f30d8416b0845d277d56364aa8b 12040
criterion_2.4.0-rc-18-g1cc3911-1.debian.tar.xz
Checksums-Sha256:
29dfd0b1e691ecf375774d7f442137889f8d169cfa233f038af4092a258b9160 870192
criterion_2.4.0-rc-18-g1cc3911.orig.tar.gz
66cd26a1e07a1a55e8fd0754ccebb4171afb3540df9183f15b6bc45b98d2cc74 12040
criterion_2.4.0-rc-18-g1cc3911-1.debian.tar.xz
Files:
35c1df5a984cc461849f403cd312f4a6 870192
criterion_2.4.0-rc-18-g1cc3911.orig.tar.gz
47fdaee9a0b1c5dd15385c68f720c7f4 12040
criterion_2.4.0-rc-18-g1cc3911-1.debian.tar.xz
-----BEGIN PGP SIGNATURE-----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=sw9g
-----END PGP SIGNATURE-----
gpgv: unknown type of key resource 'trustedkeys.kbx'
gpgv: keyblock resource '/tmp/dpkg-verify-sig.OnABX7_N/trustedkeys.kbx':
General error
gpgv: Signature made Tue Feb 15 08:18:08 2022 UTC
gpgv: using RSA key 0CBC5D95331B55C176C558E4F80D211A99FDEEF8
gpgv: issuer "s...@debian.org"
gpgv: Can't check signature: No public key
dpkg-source: warning: cannot verify signature
./criterion_2.4.0-rc-18-g1cc3911-1.dsc
dpkg-source: info: extracting criterion in /<<PKGBUILDDIR>>
dpkg-source: info: unpacking criterion_2.4.0-rc-18-g1cc3911.orig.tar.gz
dpkg-source: info: unpacking criterion_2.4.0-rc-18-g1cc3911-1.debian.tar.xz
dpkg-source: info: using patch list from debian/patches/series
dpkg-source: info: applying 0001-Added-dependency-debugbreak.patch
dpkg-source: info: applying
0002-Added-required-files-from-the-klib-dependency.patch
Check disk space
----------------
Sufficient free space for build
User Environment
----------------
APT_CONFIG=/var/lib/sbuild/apt.conf
DEB_BUILD_OPTIONS=parallel=5
HOME=/sbuild-nonexistent
LANG=C.UTF-8
LC_ALL=C.UTF-8
LOGNAME=rmb
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
SCHROOT_ALIAS_NAME=unstable-amd64-sbuild
SCHROOT_CHROOT_NAME=unstable-amd64-sbuild
SCHROOT_COMMAND=env
SCHROOT_GID=1000
SCHROOT_GROUP=rmb
SCHROOT_SESSION_ID=unstable-amd64-sbuild-3f5ee7c7-561f-42ec-a51a-da83777d2c88
SCHROOT_UID=1000
SCHROOT_USER=rmb
SHELL=/bin/sh
USER=rmb
dpkg-buildpackage
-----------------
Command: dpkg-buildpackage --sanitize-env -us -uc -rfakeroot
dpkg-buildpackage: info: source package criterion
dpkg-buildpackage: info: source version 2.4.0-rc-18-g1cc3911-1
dpkg-buildpackage: info: source distribution unstable
dpkg-buildpackage: info: source changed by SZALAY Attila <s...@debian.org>
dpkg-source --before-build .
dpkg-buildpackage: info: host architecture amd64
debian/rules clean
dh clean --with autoreconf
dh_clean
dpkg-source -b .
dpkg-source: info: using source format '3.0 (quilt)'
dpkg-source: info: building criterion using existing
./criterion_2.4.0-rc-18-g1cc3911.orig.tar.gz
dpkg-source: info: using patch list from debian/patches/series
dpkg-source: info: building criterion in
criterion_2.4.0-rc-18-g1cc3911-1.debian.tar.xz
dpkg-source: info: building criterion in criterion_2.4.0-rc-18-g1cc3911-1.dsc
debian/rules binary
dh binary --with autoreconf
dh_update_autotools_config
dh_autoreconf
dh_auto_configure
cd obj-x86_64-linux-gnu && LC_ALL=C.UTF-8 meson ..
--wrap-mode=nodownload --buildtype=plain --prefix=/usr --sysconfdir=/etc
--localstatedir=/var --libdir=lib/x86_64-linux-gnu
The Meson build system
Version: 0.62.0
Source dir: /<<PKGBUILDDIR>>
Build dir: /<<PKGBUILDDIR>>/obj-x86_64-linux-gnu
Build type: native build
Project name: criterion
Project version: 2.4.0
C compiler for the host machine: ccache cc (gcc 11.2.0 "cc (Debian 11.2.0-19)
11.2.0")
C linker for the host machine: cc ld.bfd 2.38
Host machine cpu family: x86_64
Host machine cpu: x86_64
Program python3 found: YES (/usr/bin/python3)
Program git found: NO
WARNING: You should add the boolean check kwarg to the run_command call.
It currently defaults to false,
but it will default to true in future releases of meson.
See also: https://github.com/mesonbuild/meson/issues/9300
C++ compiler for the host machine: ccache c++ (gcc 11.2.0 "c++ (Debian
11.2.0-19) 11.2.0")
C++ linker for the host machine: c++ ld.bfd 2.38
Compiler for C supports arguments -Wno-unused-parameter: YES
Compiler for C supports arguments -Wno-unused-value: YES
Compiler for C supports arguments -fvisibility=hidden: YES
Compiler for C supports arguments -fexceptions: YES
Compiler for C supports arguments /SAFESEH:NO: NO
Compiler for C supports arguments /source-charset:utf-8: NO
Checking for function "clock_gettime" : YES
Checking for function "fopencookie" : YES
Checking for function "funopen" : NO
Checking for function "getcwd" : YES
Checking for function "isatty" : YES
Checking for function "nl_langinfo" : YES
Checking for function "open_memstream" : YES
Checking for function "strtok_r" : YES
Checking for function "strtok_s" : NO
Header <time.h> has symbol "CLOCK_MONOTONIC_RAW" : YES
Checking for function "GetCurrentDirectory" : NO
Checking for function "PathIsRelative" : NO
Has header "synchapi.h" : NO
Program gettext found: YES (/usr/bin/gettext)
Program msgfmt found: YES (/usr/bin/msgfmt)
Program msginit found: YES (/usr/bin/msginit)
Program msgmerge found: YES (/usr/bin/msgmerge)
Program xgettext found: YES (/usr/bin/xgettext)
Run-time dependency threads found: YES
Found pkg-config: /usr/bin/pkg-config (0.29.2)
Run-time dependency nanomsg found: YES 1.1.5
Found CMake: /usr/bin/cmake (3.23.0)
WARNING: CMake Toolchain: Failed to determine CMake compilers state
Run-time dependency nanopb found: NO
../meson.build:177:1: ERROR: Automatic wrap-based subproject downloading is
disabled
A full log can be found at
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-logs/meson-log.txt
cd obj-x86_64-linux-gnu && tail -v -n \+0 meson-logs/meson-log.txt
==> meson-logs/meson-log.txt <==
Build started at 2022-04-05T14:07:48.824876
Main binary: /usr/bin/python3
Build Options: -Dprefix=/usr -Dlibdir=lib/x86_64-linux-gnu -Dlocalstatedir=/var
-Dsysconfdir=/etc -Dbuildtype=plain -Dwrap_mode=nodownload
Python system: Linux
The Meson build system
Version: 0.62.0
Source dir: /<<PKGBUILDDIR>>
Build dir: /<<PKGBUILDDIR>>/obj-x86_64-linux-gnu
Build type: native build
Project name: criterion
Project version: 2.4.0
Sanity testing C compiler: ccache cc
Is cross compiler: False.
Sanity check compiler command line: ccache cc sanitycheckc.c -o
sanitycheckc.exe -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=.
-fstack-protector-strong -Wformat -Werror=format-security -Wdate-time
-D_FORTIFY_SOURCE=2 -D_FILE_OFFSET_BITS=64 -Wl,-z,relro
Sanity check compile stdout:
-----
Sanity check compile stderr:
-----
Running test binary command:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/sanitycheckc.exe
C compiler for the host machine: ccache cc (gcc 11.2.0 "cc (Debian 11.2.0-19)
11.2.0")
C linker for the host machine: cc ld.bfd 2.38
Sanity testing C compiler: ccache cc
Is cross compiler: False.
Sanity check compiler command line: ccache cc sanitycheckc.c -o
sanitycheckc.exe -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=.
-fstack-protector-strong -Wformat -Werror=format-security -Wdate-time
-D_FORTIFY_SOURCE=2 -D_FILE_OFFSET_BITS=64 -Wl,-z,relro
Sanity check compile stdout:
-----
Sanity check compile stderr:
-----
Running test binary command:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/sanitycheckc.exe
C compiler for the build machine: ccache cc (gcc 11.2.0 "cc (Debian 11.2.0-19)
11.2.0")
C linker for the build machine: cc ld.bfd 2.38
Build machine cpu family: x86_64
Build machine cpu: x86_64
Host machine cpu family: x86_64
Host machine cpu: x86_64
Target machine cpu family: x86_64
Target machine cpu: x86_64
Program python3 found: YES (/usr/bin/python3)
Program git found: NO
WARNING: You should add the boolean check kwarg to the run_command call.
It currently defaults to false,
but it will default to true in future releases of meson.
See also: https://github.com/mesonbuild/meson/issues/9300
Running command: /<<PKGBUILDDIR>>/ci/isdir.py .git
--- stdout ---
--- stderr ---
Sanity testing C++ compiler: ccache c++
Is cross compiler: False.
Sanity check compiler command line: ccache c++ sanitycheckcpp.cc -o
sanitycheckcpp.exe -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=.
-fstack-protector-strong -Wformat -Werror=format-security -Wdate-time
-D_FORTIFY_SOURCE=2 -D_FILE_OFFSET_BITS=64 -Wl,-z,relro
Sanity check compile stdout:
-----
Sanity check compile stderr:
-----
Running test binary command:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/sanitycheckcpp.exe
C++ compiler for the build machine: ccache c++ (gcc 11.2.0 "c++ (Debian
11.2.0-19) 11.2.0")
C++ linker for the build machine: c++ ld.bfd 2.38
Sanity testing C++ compiler: ccache c++
Is cross compiler: False.
Sanity check compiler command line: ccache c++ sanitycheckcpp.cc -o
sanitycheckcpp.exe -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=.
-fstack-protector-strong -Wformat -Werror=format-security -Wdate-time
-D_FORTIFY_SOURCE=2 -D_FILE_OFFSET_BITS=64 -Wl,-z,relro
Sanity check compile stdout:
-----
Sanity check compile stderr:
-----
Running test binary command:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/sanitycheckcpp.exe
C++ compiler for the host machine: ccache c++ (gcc 11.2.0 "c++ (Debian
11.2.0-19) 11.2.0")
C++ linker for the host machine: c++ ld.bfd 2.38
Running compile:
Working directory:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpsy3xrtht
Command line: ccache cc
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpsy3xrtht/testfile.c -o
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpsy3xrtht/output.obj -c
-g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat
-Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -D_FILE_OFFSET_BITS=64
-O0 -Wunused-parameter -Wno-unused-parameter
Code:
extern int i;
int i;
Compiler stdout:
Compiler stderr:
Compiler for C supports arguments -Wno-unused-parameter: YES
Running compile:
Working directory:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpu6kf1obg
Command line: ccache cc
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpu6kf1obg/testfile.c -o
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpu6kf1obg/output.obj -c
-g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat
-Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -D_FILE_OFFSET_BITS=64
-O0 -Wunused-value -Wno-unused-value
Code:
extern int i;
int i;
Compiler stdout:
Compiler stderr:
Compiler for C supports arguments -Wno-unused-value: YES
Running compile:
Working directory:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmp1_npqv85
Command line: ccache cc
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmp1_npqv85/testfile.c -o
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmp1_npqv85/output.obj -c
-g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat
-Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -D_FILE_OFFSET_BITS=64
-O0 -fvisibility=hidden
Code:
extern int i;
int i;
Compiler stdout:
Compiler stderr:
Compiler for C supports arguments -fvisibility=hidden: YES
Running compile:
Working directory:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpscq_zoft
Command line: ccache cc
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpscq_zoft/testfile.c -o
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpscq_zoft/output.obj -c
-g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat
-Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -D_FILE_OFFSET_BITS=64
-O0 -fexceptions
Code:
extern int i;
int i;
Compiler stdout:
Compiler stderr:
Compiler for C supports arguments -fexceptions: YES
Running compile:
Working directory:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmp1aplnqrk
Command line: ccache cc
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmp1aplnqrk/testfile.c -o
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmp1aplnqrk/output.obj -c
-g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat
-Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -D_FILE_OFFSET_BITS=64
-O0 /SAFESEH:NO
Code:
extern int i;
int i;
Compiler stdout:
Compiler stderr:
cc: warning: /SAFESEH:NO: linker input file unused because linking not done
cc: error: /SAFESEH:NO: linker input file not found: No such file or directory
Compiler for C supports arguments /SAFESEH:NO: NO
Running compile:
Working directory:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmp3gnv5xt_
Command line: ccache cc
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmp3gnv5xt_/testfile.c -o
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmp3gnv5xt_/output.obj -c
-g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat
-Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -D_FILE_OFFSET_BITS=64
-O0 /source-charset:utf-8
Code:
extern int i;
int i;
Compiler stdout:
Compiler stderr:
cc: warning: /source-charset:utf-8: linker input file unused because linking
not done
cc: error: /source-charset:utf-8: linker input file not found: No such file or
directory
Compiler for C supports arguments /source-charset:utf-8: NO
Running compile:
Working directory:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpppo5zph4
Command line: ccache cc
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpppo5zph4/testfile.c -o
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpppo5zph4/output.exe -g
-O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat
-Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -D_FILE_OFFSET_BITS=64
-O0 -std=c11 -Wl,-z,relro
Code:
#define clock_gettime meson_disable_define_of_clock_gettime
#define _GNU_SOURCE
#include <limits.h>
#undef clock_gettime
#ifdef __cplusplus
extern "C"
#endif
char clock_gettime (void);
#if defined __stub_clock_gettime || defined __stub___clock_gettime
fail fail fail this function is not going to work
#endif
int main(void) {
return clock_gettime ();
}
Compiler stdout:
Compiler stderr:
Checking for function "clock_gettime" : YES
Running compile:
Working directory:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpoi16nr2f
Command line: ccache cc
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpoi16nr2f/testfile.c -o
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpoi16nr2f/output.exe -g
-O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat
-Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -D_FILE_OFFSET_BITS=64
-O0 -std=c11 -Wl,-z,relro
Code:
#define fopencookie meson_disable_define_of_fopencookie
#define _GNU_SOURCE
#include <limits.h>
#undef fopencookie
#ifdef __cplusplus
extern "C"
#endif
char fopencookie (void);
#if defined __stub_fopencookie || defined __stub___fopencookie
fail fail fail this function is not going to work
#endif
int main(void) {
return fopencookie ();
}
Compiler stdout:
Compiler stderr:
Checking for function "fopencookie" : YES
Running compile:
Working directory:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpowj022gl
Command line: ccache cc
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpowj022gl/testfile.c -o
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpowj022gl/output.exe -g
-O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat
-Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -D_FILE_OFFSET_BITS=64
-O0 -std=c11 -Wl,-z,relro
Code:
#define funopen meson_disable_define_of_funopen
#define _GNU_SOURCE
#include <limits.h>
#undef funopen
#ifdef __cplusplus
extern "C"
#endif
char funopen (void);
#if defined __stub_funopen || defined __stub___funopen
fail fail fail this function is not going to work
#endif
int main(void) {
return funopen ();
}
Compiler stdout:
Compiler stderr:
/usr/bin/ld: /tmp/ccgvDBnO.o: in function `main':
./obj-x86_64-linux-gnu/meson-private/tmpowj022gl/testfile.c:19: undefined
reference to `funopen'
collect2: error: ld returned 1 exit status
Running compile:
Working directory:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpczzrvuqt
Command line: ccache cc
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpczzrvuqt/testfile.c -o
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpczzrvuqt/output.exe -g
-O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat
-Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -D_FILE_OFFSET_BITS=64
-O0 -std=c11 -Wl,-z,relro
Code:
#define _GNU_SOURCE
int main(void) {
/* With some toolchains (MSYS2/mingw for example) the compiler
* provides various builtins which are not really implemented and
* fall back to the stdlib where they aren't provided and fail at
* build/link time. In case the user provides a header, including
* the header didn't lead to the function being defined, and the
* function we are checking isn't a builtin itself we assume the
* builtin is not functional and we just error out. */
#if !1 && !defined(funopen) && !0
#error "No definition for __builtin_funopen found in the prefix"
#endif
#ifdef __has_builtin
#if !__has_builtin(__builtin_funopen)
#error "__builtin_funopen not found"
#endif
#elif ! defined(funopen)
__builtin_funopen;
#endif
return 0;
}
Compiler stdout:
Compiler stderr:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpczzrvuqt/testfile.c: In
function 'main':
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpczzrvuqt/testfile.c:19:18:
error: #error "__builtin_funopen not found"
19 | #error "__builtin_funopen not found"
| ^~~~~
Checking for function "funopen" : NO
Running compile:
Working directory:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpyja7j44k
Command line: ccache cc
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpyja7j44k/testfile.c -o
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpyja7j44k/output.exe -g
-O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat
-Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -D_FILE_OFFSET_BITS=64
-O0 -std=c11 -Wl,-z,relro
Code:
#define getcwd meson_disable_define_of_getcwd
#define _GNU_SOURCE
#include <limits.h>
#undef getcwd
#ifdef __cplusplus
extern "C"
#endif
char getcwd (void);
#if defined __stub_getcwd || defined __stub___getcwd
fail fail fail this function is not going to work
#endif
int main(void) {
return getcwd ();
}
Compiler stdout:
Compiler stderr:
Checking for function "getcwd" : YES
Running compile:
Working directory:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpw32urcjz
Command line: ccache cc
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpw32urcjz/testfile.c -o
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpw32urcjz/output.exe -g
-O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat
-Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -D_FILE_OFFSET_BITS=64
-O0 -std=c11 -Wl,-z,relro
Code:
#define isatty meson_disable_define_of_isatty
#define _GNU_SOURCE
#include <limits.h>
#undef isatty
#ifdef __cplusplus
extern "C"
#endif
char isatty (void);
#if defined __stub_isatty || defined __stub___isatty
fail fail fail this function is not going to work
#endif
int main(void) {
return isatty ();
}
Compiler stdout:
Compiler stderr:
Checking for function "isatty" : YES
Running compile:
Working directory:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpsu66hvkk
Command line: ccache cc
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpsu66hvkk/testfile.c -o
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpsu66hvkk/output.exe -g
-O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat
-Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -D_FILE_OFFSET_BITS=64
-O0 -std=c11 -Wl,-z,relro
Code:
#define nl_langinfo meson_disable_define_of_nl_langinfo
#define _GNU_SOURCE
#include <limits.h>
#undef nl_langinfo
#ifdef __cplusplus
extern "C"
#endif
char nl_langinfo (void);
#if defined __stub_nl_langinfo || defined __stub___nl_langinfo
fail fail fail this function is not going to work
#endif
int main(void) {
return nl_langinfo ();
}
Compiler stdout:
Compiler stderr:
Checking for function "nl_langinfo" : YES
Running compile:
Working directory:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmp77unpvc0
Command line: ccache cc
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmp77unpvc0/testfile.c -o
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmp77unpvc0/output.exe -g
-O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat
-Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -D_FILE_OFFSET_BITS=64
-O0 -std=c11 -Wl,-z,relro
Code:
#define open_memstream meson_disable_define_of_open_memstream
#define _GNU_SOURCE
#include <limits.h>
#undef open_memstream
#ifdef __cplusplus
extern "C"
#endif
char open_memstream (void);
#if defined __stub_open_memstream || defined __stub___open_memstream
fail fail fail this function is not going to work
#endif
int main(void) {
return open_memstream ();
}
Compiler stdout:
Compiler stderr:
Checking for function "open_memstream" : YES
Running compile:
Working directory:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpk0irvnq8
Command line: ccache cc
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpk0irvnq8/testfile.c -o
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpk0irvnq8/output.exe -g
-O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat
-Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -D_FILE_OFFSET_BITS=64
-O0 -std=c11 -Wl,-z,relro
Code:
#define strtok_r meson_disable_define_of_strtok_r
#define _GNU_SOURCE
#include <limits.h>
#undef strtok_r
#ifdef __cplusplus
extern "C"
#endif
char strtok_r (void);
#if defined __stub_strtok_r || defined __stub___strtok_r
fail fail fail this function is not going to work
#endif
int main(void) {
return strtok_r ();
}
Compiler stdout:
Compiler stderr:
Checking for function "strtok_r" : YES
Running compile:
Working directory:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmp8t7yw4ln
Command line: ccache cc
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmp8t7yw4ln/testfile.c -o
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmp8t7yw4ln/output.exe -g
-O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat
-Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -D_FILE_OFFSET_BITS=64
-O0 -std=c11 -Wl,-z,relro
Code:
#define strtok_s meson_disable_define_of_strtok_s
#define _GNU_SOURCE
#include <limits.h>
#undef strtok_s
#ifdef __cplusplus
extern "C"
#endif
char strtok_s (void);
#if defined __stub_strtok_s || defined __stub___strtok_s
fail fail fail this function is not going to work
#endif
int main(void) {
return strtok_s ();
}
Compiler stdout:
Compiler stderr:
/usr/bin/ld: /tmp/ccfyIlC0.o: in function `main':
./obj-x86_64-linux-gnu/meson-private/tmp8t7yw4ln/testfile.c:19: undefined
reference to `strtok_s'
collect2: error: ld returned 1 exit status
Running compile:
Working directory:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpc7__mdx_
Command line: ccache cc
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpc7__mdx_/testfile.c -o
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpc7__mdx_/output.exe -g
-O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat
-Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -D_FILE_OFFSET_BITS=64
-O0 -std=c11 -Wl,-z,relro
Code:
#define _GNU_SOURCE
int main(void) {
/* With some toolchains (MSYS2/mingw for example) the compiler
* provides various builtins which are not really implemented and
* fall back to the stdlib where they aren't provided and fail at
* build/link time. In case the user provides a header, including
* the header didn't lead to the function being defined, and the
* function we are checking isn't a builtin itself we assume the
* builtin is not functional and we just error out. */
#if !1 && !defined(strtok_s) && !0
#error "No definition for __builtin_strtok_s found in the prefix"
#endif
#ifdef __has_builtin
#if !__has_builtin(__builtin_strtok_s)
#error "__builtin_strtok_s not found"
#endif
#elif ! defined(strtok_s)
__builtin_strtok_s;
#endif
return 0;
}
Compiler stdout:
Compiler stderr:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpc7__mdx_/testfile.c: In
function 'main':
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpc7__mdx_/testfile.c:19:18:
error: #error "__builtin_strtok_s not found"
19 | #error "__builtin_strtok_s not found"
| ^~~~~
Checking for function "strtok_s" : NO
Running compile:
Working directory:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmp3b0ezz68
Command line: ccache cc
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmp3b0ezz68/testfile.c -o
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmp3b0ezz68/output.obj -c
-g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat
-Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -D_FILE_OFFSET_BITS=64
-O0 -std=c11
Code:
#define _GNU_SOURCE
#include <time.h>
int main(void) {
/* If it's not defined as a macro, try to use as a symbol */
#ifndef CLOCK_MONOTONIC_RAW
CLOCK_MONOTONIC_RAW;
#endif
return 0;
}
Compiler stdout:
Compiler stderr:
Header <time.h> has symbol "CLOCK_MONOTONIC_RAW" : YES
Running compile:
Working directory:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmp1reo8hla
Command line: ccache cc
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmp1reo8hla/testfile.c -o
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmp1reo8hla/output.exe -g
-O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat
-Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -D_FILE_OFFSET_BITS=64
-O0 -std=c11 -Wl,-z,relro
Code:
#define GetCurrentDirectory meson_disable_define_of_GetCurrentDirectory
#define _GNU_SOURCE
#include <limits.h>
#undef GetCurrentDirectory
#ifdef __cplusplus
extern "C"
#endif
char GetCurrentDirectory (void);
#if defined __stub_GetCurrentDirectory || defined
__stub___GetCurrentDirectory
fail fail fail this function is not going to work
#endif
int main(void) {
return GetCurrentDirectory ();
}
Compiler stdout:
Compiler stderr:
/usr/bin/ld: /tmp/ccmQhdEh.o: in function `main':
./obj-x86_64-linux-gnu/meson-private/tmp1reo8hla/testfile.c:19: undefined
reference to `GetCurrentDirectory'
collect2: error: ld returned 1 exit status
Running compile:
Working directory:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmp7rzfuab5
Command line: ccache cc
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmp7rzfuab5/testfile.c -o
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmp7rzfuab5/output.exe -g
-O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat
-Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -D_FILE_OFFSET_BITS=64
-O0 -std=c11 -Wl,-z,relro
Code:
#define _GNU_SOURCE
int main(void) {
/* With some toolchains (MSYS2/mingw for example) the compiler
* provides various builtins which are not really implemented and
* fall back to the stdlib where they aren't provided and fail at
* build/link time. In case the user provides a header, including
* the header didn't lead to the function being defined, and the
* function we are checking isn't a builtin itself we assume the
* builtin is not functional and we just error out. */
#if !1 && !defined(GetCurrentDirectory) && !0
#error "No definition for __builtin_GetCurrentDirectory found in
the prefix"
#endif
#ifdef __has_builtin
#if !__has_builtin(__builtin_GetCurrentDirectory)
#error "__builtin_GetCurrentDirectory not found"
#endif
#elif ! defined(GetCurrentDirectory)
__builtin_GetCurrentDirectory;
#endif
return 0;
}
Compiler stdout:
Compiler stderr:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmp7rzfuab5/testfile.c: In
function 'main':
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmp7rzfuab5/testfile.c:19:18:
error: #error "__builtin_GetCurrentDirectory not found"
19 | #error "__builtin_GetCurrentDirectory not found"
| ^~~~~
Checking for function "GetCurrentDirectory" : NO
Running compile:
Working directory:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpxvd9u6g5
Command line: ccache cc
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpxvd9u6g5/testfile.c -o
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpxvd9u6g5/output.exe -g
-O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat
-Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -D_FILE_OFFSET_BITS=64
-O0 -std=c11 -Wl,-z,relro
Code:
#define PathIsRelative meson_disable_define_of_PathIsRelative
#define _GNU_SOURCE
#include <limits.h>
#undef PathIsRelative
#ifdef __cplusplus
extern "C"
#endif
char PathIsRelative (void);
#if defined __stub_PathIsRelative || defined __stub___PathIsRelative
fail fail fail this function is not going to work
#endif
int main(void) {
return PathIsRelative ();
}
Compiler stdout:
Compiler stderr:
/usr/bin/ld: /tmp/ccFnVayO.o: in function `main':
./obj-x86_64-linux-gnu/meson-private/tmpxvd9u6g5/testfile.c:19: undefined
reference to `PathIsRelative'
collect2: error: ld returned 1 exit status
Running compile:
Working directory:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpsqngdj9k
Command line: ccache cc
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpsqngdj9k/testfile.c -o
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpsqngdj9k/output.exe -g
-O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat
-Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -D_FILE_OFFSET_BITS=64
-O0 -std=c11 -Wl,-z,relro
Code:
#define _GNU_SOURCE
int main(void) {
/* With some toolchains (MSYS2/mingw for example) the compiler
* provides various builtins which are not really implemented and
* fall back to the stdlib where they aren't provided and fail at
* build/link time. In case the user provides a header, including
* the header didn't lead to the function being defined, and the
* function we are checking isn't a builtin itself we assume the
* builtin is not functional and we just error out. */
#if !1 && !defined(PathIsRelative) && !0
#error "No definition for __builtin_PathIsRelative found in the
prefix"
#endif
#ifdef __has_builtin
#if !__has_builtin(__builtin_PathIsRelative)
#error "__builtin_PathIsRelative not found"
#endif
#elif ! defined(PathIsRelative)
__builtin_PathIsRelative;
#endif
return 0;
}
Compiler stdout:
Compiler stderr:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpsqngdj9k/testfile.c: In
function 'main':
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpsqngdj9k/testfile.c:19:18:
error: #error "__builtin_PathIsRelative not found"
19 | #error "__builtin_PathIsRelative not found"
| ^~~~~
Checking for function "PathIsRelative" : NO
Running compile:
Working directory:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmp9ipuemtt
Command line: ccache cc
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmp9ipuemtt/testfile.c -E
-P -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong
-Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2
-D_FILE_OFFSET_BITS=64 -P -O0 -std=c11
Code:
#ifdef __has_include
#if !__has_include("synchapi.h")
#error "Header 'synchapi.h' could not be found"
#endif
#else
#include <synchapi.h>
#endif
Compiler stdout:
Compiler stderr:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmp9ipuemtt/testfile.c:4:12:
error: #error "Header 'synchapi.h' could not be found"
4 | #error "Header 'synchapi.h' could not be found"
| ^~~~~
Has header "synchapi.h" : NO
Program gettext found: YES (/usr/bin/gettext)
Program msgfmt found: YES (/usr/bin/msgfmt)
Program msginit found: YES (/usr/bin/msginit)
Program msgmerge found: YES (/usr/bin/msgmerge)
Program xgettext found: YES (/usr/bin/xgettext)
Run-time dependency threads found: YES
Pkg-config binary for 1 is not cached.
Pkg-config binary missing from cross or native file, or env var undefined.
Trying a default Pkg-config fallback at pkg-config
Found pkg-config: /usr/bin/pkg-config (0.29.2)
Determining dependency 'nanomsg' with pkg-config executable
'/usr/bin/pkg-config'
env[PKG_CONFIG_PATH]:
Called `/usr/bin/pkg-config --modversion nanomsg` -> 0
1.1.5
env[PKG_CONFIG_PATH]:
Called `/usr/bin/pkg-config --cflags nanomsg` -> 0
env[PKG_CONFIG_ALLOW_SYSTEM_LIBS]: 1
env[PKG_CONFIG_PATH]:
Called `/usr/bin/pkg-config --libs nanomsg` -> 0
-L/usr/lib/x86_64-linux-gnu -lnanomsg
env[PKG_CONFIG_PATH]:
Called `/usr/bin/pkg-config --libs nanomsg` -> 0
-lnanomsg
Running compile:
Working directory:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmp9m6dusdp
Command line: ccache c++
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmp9m6dusdp/testfile.cpp -o
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmp9m6dusdp/output.exe -g
-O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat
-Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -D_FILE_OFFSET_BITS=64
-O0 -fpermissive -Wl,-z,relro
Code:
#include<stdio.h>
int main(void) {
printf("%ld\n", (long)(sizeof(void *)));
return 0;
}
Compiler stdout:
Compiler stderr:
Program stdout:
8
Program stderr:
Running compile:
Working directory:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpb6au26yp
Command line: ccache c++
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpb6au26yp/testfile.cpp -o
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/tmpb6au26yp/output.obj -c
-g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat
-Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -D_FILE_OFFSET_BITS=64
-O0 -fpermissive --print-search-dirs
Code:
Compiler stdout:
install: /usr/lib/gcc/x86_64-linux-gnu/11/
programs:
=/usr/lib/gcc/x86_64-linux-gnu/11/:/usr/lib/gcc/x86_64-linux-gnu/11/:/usr/lib/gcc/x86_64-linux-gnu/:/usr/lib/gcc/x86_64-linux-gnu/11/:/usr/lib/gcc/x86_64-linux-gnu/:/usr/lib/gcc/x86_64-linux-gnu/11/../../../../x86_64-linux-gnu/bin/x86_64-linux-gnu/11/:/usr/lib/gcc/x86_64-linux-gnu/11/../../../../x86_64-linux-gnu/bin/x86_64-linux-gnu/:/usr/lib/gcc/x86_64-linux-gnu/11/../../../../x86_64-linux-gnu/bin/
libraries:
=/usr/lib/gcc/x86_64-linux-gnu/11/:/usr/lib/gcc/x86_64-linux-gnu/11/../../../../x86_64-linux-gnu/lib/x86_64-linux-gnu/11/:/usr/lib/gcc/x86_64-linux-gnu/11/../../../../x86_64-linux-gnu/lib/x86_64-linux-gnu/:/usr/lib/gcc/x86_64-linux-gnu/11/../../../../x86_64-linux-gnu/lib/../lib/:/usr/lib/gcc/x86_64-linux-gnu/11/../../../x86_64-linux-gnu/11/:/usr/lib/gcc/x86_64-linux-gnu/11/../../../x86_64-linux-gnu/:/usr/lib/gcc/x86_64-linux-gnu/11/../../../../lib/:/lib/x86_64-linux-gnu/11/:/lib/x86_64-linux-gnu/:/lib/../lib/:/usr/lib/x86_64-linux-gnu/11/:/usr/lib/x86_64-linux-gnu/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-linux-gnu/11/../../../../x86_64-linux-gnu/lib/:/usr/lib/gcc/x86_64-linux-gnu/11/../../../:/lib/:/usr/lib/
Compiler stderr:
Run-time dependency nanomsg found: YES 1.1.5
CMake binary for 1 is not cached
CMake binary missing from cross or native file, or env var undefined.
Trying a default CMake fallback at cmake
Found CMake: /usr/bin/cmake (3.23.0)
Extracting basic cmake information
CMake Toolchain: Calling CMake once to generate the compiler state
Calling CMake (['/usr/bin/cmake']) in
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/__CMake_compiler_info__
with:
- "--trace-expand"
- "--trace-format=json-v1"
- "--no-warn-unused-cli"
- "--trace-redirect=cmake_trace.txt"
- "-G"
- "Ninja"
-
"-DCMAKE_TOOLCHAIN_FILE=/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/__CMake_compiler_info__/CMakeMesonTempToolchainFile.cmake"
- "."
WARNING: CMake Toolchain: Failed to determine CMake compilers state
Try CMake generator: auto
Calling CMake (['/usr/bin/cmake']) in
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/cmake_nanopb with:
- "--trace-expand"
- "--trace-format=json-v1"
- "--no-warn-unused-cli"
- "--trace-redirect=cmake_trace.txt"
-
"-DCMAKE_TOOLCHAIN_FILE=/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/cmake_nanopb/CMakeMesonToolchainFile.cmake"
- "."
CMake failed to gather system information for generator with error code 1
OUT:
Running with expanded trace output on.
Not searching for unused variables given on the command line.
Trace will be written to cmake_trace.txt
-- The C compiler identification is GNU 11.2.0
-- The CXX compiler identification is GNU 11.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - failed
-- Check for working C compiler: /usr/bin/cc
-- Check for working C compiler: /usr/bin/cc - broken
-- Configuring incomplete, errors occurred!
See also
"/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/cmake_nanopb/CMakeFiles/CMakeOutput.log".
See also
"/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/cmake_nanopb/CMakeFiles/CMakeError.log".
ERR:
CMake Error at /usr/share/cmake-3.23/Modules/CMakeTestCCompiler.cmake:69
(message):
The C compiler
"/usr/bin/cc"
is not able to compile a simple test program.
It fails with the following output:
Change Dir:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/cmake_nanopb/CMakeFiles/CMakeTmp
Run Build Command(s):/usr/bin/gmake -f Makefile cmTC_1d540/fast &&
gmake[1]: Entering directory
'/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/cmake_nanopb/CMakeFiles/CMakeTmp'
/usr/bin/gmake -f CMakeFiles/cmTC_1d540.dir/build.make
CMakeFiles/cmTC_1d540.dir/build
gmake[2]: Entering directory
'/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/cmake_nanopb/CMakeFiles/CMakeTmp'
Building C object CMakeFiles/cmTC_1d540.dir/testCCompiler.c.o
/usr/bin/ccache /usr/bin/cc -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=.
-fstack-protector-strong -Wformat -Werror=format-security -o
CMakeFiles/cmTC_1d540.dir/testCCompiler.c.o -c
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/cmake_nanopb/CMakeFiles/CMakeTmp/testCCompiler.c
ccache: error: Failed to create directory
/sbuild-nonexistent/.cache/ccache/tmp: Permission denied
gmake[2]: *** [CMakeFiles/cmTC_1d540.dir/build.make:78:
CMakeFiles/cmTC_1d540.dir/testCCompiler.c.o] Error 1
gmake[2]: Leaving directory
'/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/cmake_nanopb/CMakeFiles/CMakeTmp'
gmake[1]: *** [Makefile:127: cmTC_1d540/fast] Error 2
gmake[1]: Leaving directory
'/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/cmake_nanopb/CMakeFiles/CMakeTmp'
CMake will not be able to correctly generate this project.
Call Stack (most recent call first):
CMakeLists.txt:3 (project)
Try CMake generator: Ninja
Calling CMake (['/usr/bin/cmake']) in
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/cmake_nanopb with:
- "-G"
- "Ninja"
- "--trace-expand"
- "--trace-format=json-v1"
- "--no-warn-unused-cli"
- "--trace-redirect=cmake_trace.txt"
-
"-DCMAKE_TOOLCHAIN_FILE=/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/cmake_nanopb/CMakeMesonToolchainFile.cmake"
- "."
CMake failed to gather system information for generator Ninja with error code 1
OUT:
Running with expanded trace output on.
Not searching for unused variables given on the command line.
Trace will be written to cmake_trace.txt
-- The C compiler identification is GNU 11.2.0
-- The CXX compiler identification is GNU 11.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - failed
-- Check for working C compiler: /usr/bin/cc
-- Check for working C compiler: /usr/bin/cc - broken
-- Configuring incomplete, errors occurred!
See also
"/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/cmake_nanopb/CMakeFiles/CMakeOutput.log".
See also
"/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/cmake_nanopb/CMakeFiles/CMakeError.log".
ERR:
CMake Error at /usr/share/cmake-3.23/Modules/CMakeTestCCompiler.cmake:69
(message):
The C compiler
"/usr/bin/cc"
is not able to compile a simple test program.
It fails with the following output:
Change Dir:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/cmake_nanopb/CMakeFiles/CMakeTmp
Run Build Command(s):/usr/bin/ninja cmTC_633aa && [1/2] Building C object
CMakeFiles/cmTC_633aa.dir/testCCompiler.c.o
FAILED: CMakeFiles/cmTC_633aa.dir/testCCompiler.c.o
/usr/bin/ccache /usr/bin/cc -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=.
-fstack-protector-strong -Wformat -Werror=format-security -o
CMakeFiles/cmTC_633aa.dir/testCCompiler.c.o -c
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/cmake_nanopb/CMakeFiles/CMakeTmp/testCCompiler.c
ccache: error: Failed to create directory
/sbuild-nonexistent/.cache/ccache/tmp: Permission denied
ninja: build stopped: subcommand failed.
CMake will not be able to correctly generate this project.
Call Stack (most recent call first):
CMakeLists.txt:3 (project)
Try CMake generator: Unix Makefiles
Calling CMake (['/usr/bin/cmake']) in
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/cmake_nanopb with:
- "-G"
- "Unix Makefiles"
- "--trace-expand"
- "--trace-format=json-v1"
- "--no-warn-unused-cli"
- "--trace-redirect=cmake_trace.txt"
-
"-DCMAKE_TOOLCHAIN_FILE=/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/cmake_nanopb/CMakeMesonToolchainFile.cmake"
- "."
CMake failed to gather system information for generator Unix Makefiles with
error code 1
OUT:
Running with expanded trace output on.
Not searching for unused variables given on the command line.
Trace will be written to cmake_trace.txt
-- The C compiler identification is GNU 11.2.0
-- The CXX compiler identification is GNU 11.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - failed
-- Check for working C compiler: /usr/bin/cc
-- Check for working C compiler: /usr/bin/cc - broken
-- Configuring incomplete, errors occurred!
See also
"/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/cmake_nanopb/CMakeFiles/CMakeOutput.log".
See also
"/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/cmake_nanopb/CMakeFiles/CMakeError.log".
ERR:
CMake Error at /usr/share/cmake-3.23/Modules/CMakeTestCCompiler.cmake:69
(message):
The C compiler
"/usr/bin/cc"
is not able to compile a simple test program.
It fails with the following output:
Change Dir:
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/cmake_nanopb/CMakeFiles/CMakeTmp
Run Build Command(s):/usr/bin/gmake -f Makefile cmTC_b6a75/fast &&
gmake[1]: Entering directory
'/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/cmake_nanopb/CMakeFiles/CMakeTmp'
/usr/bin/gmake -f CMakeFiles/cmTC_b6a75.dir/build.make
CMakeFiles/cmTC_b6a75.dir/build
gmake[2]: Entering directory
'/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/cmake_nanopb/CMakeFiles/CMakeTmp'
Building C object CMakeFiles/cmTC_b6a75.dir/testCCompiler.c.o
/usr/bin/ccache /usr/bin/cc -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=.
-fstack-protector-strong -Wformat -Werror=format-security -o
CMakeFiles/cmTC_b6a75.dir/testCCompiler.c.o -c
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/cmake_nanopb/CMakeFiles/CMakeTmp/testCCompiler.c
ccache: error: Failed to create directory
/sbuild-nonexistent/.cache/ccache/tmp: Permission denied
gmake[2]: *** [CMakeFiles/cmTC_b6a75.dir/build.make:78:
CMakeFiles/cmTC_b6a75.dir/testCCompiler.c.o] Error 1
gmake[2]: Leaving directory
'/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/cmake_nanopb/CMakeFiles/CMakeTmp'
gmake[1]: *** [Makefile:127: cmTC_b6a75/fast] Error 2
gmake[1]: Leaving directory
'/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/cmake_nanopb/CMakeFiles/CMakeTmp'
CMake will not be able to correctly generate this project.
Call Stack (most recent call first):
CMakeLists.txt:3 (project)
Try CMake generator: Visual Studio 10 2010
Calling CMake (['/usr/bin/cmake']) in
/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/cmake_nanopb with:
- "-G"
- "Visual Studio 10 2010"
- "--trace-expand"
- "--trace-format=json-v1"
- "--no-warn-unused-cli"
- "--trace-redirect=cmake_trace.txt"
-
"-DCMAKE_TOOLCHAIN_FILE=/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/meson-private/cmake_nanopb/CMakeMesonToolchainFile.cmake"
- "."
CMake failed to gather system information for generator Visual Studio 10 2010
with error code 1
OUT:
Running with expanded trace output on.
Not searching for unused variables given on the command line.
Trace will be written to cmake_trace.txt
ERR:
CMake Error: Could not create named generator Visual Studio 10 2010
Generators
Green Hills MULTI = Generates Green Hills MULTI files
(experimental, work-in-progress).
* Unix Makefiles = Generates standard UNIX makefiles.
Ninja = Generates build.ninja files.
Ninja Multi-Config = Generates build-<Config>.ninja files.
Watcom WMake = Generates Watcom WMake makefiles.
CodeBlocks - Ninja = Generates CodeBlocks project files.
CodeBlocks - Unix Makefiles = Generates CodeBlocks project files.
CodeLite - Ninja = Generates CodeLite project files.
CodeLite - Unix Makefiles = Generates CodeLite project files.
Eclipse CDT4 - Ninja = Generates Eclipse CDT 4.0 project files.
Eclipse CDT4 - Unix Makefiles= Generates Eclipse CDT 4.0 project files.
Kate - Ninja = Generates Kate project files.
Kate - Unix Makefiles = Generates Kate project files.
Sublime Text 2 - Ninja = Generates Sublime Text 2 project files.
Sublime Text 2 - Unix Makefiles
= Generates Sublime Text 2 project files.
Dependency nanopb not found: Unable to obtain CMake system information
Run-time dependency nanopb found: NO
../meson.build:177:1: ERROR: Automatic wrap-based subproject downloading is
disabled
dh_auto_configure: error: cd obj-x86_64-linux-gnu && LC_ALL=C.UTF-8 meson ..
--wrap-mode=nodownload --buildtype=plain --prefix=/usr --sysconfdir=/etc
--localstatedir=/var --libdir=lib/x86_64-linux-gnu returned exit code 1
make: *** [debian/rules:3: binary] Error 25
dpkg-buildpackage: error: debian/rules binary subprocess returned exit status 2
--------------------------------------------------------------------------------
Build finished at 2022-04-05T14:07:50Z
Finished
--------
+------------------------------------------------------------------------------+
| Cleanup |
+------------------------------------------------------------------------------+
Purging /<<BUILDDIR>>
Not cleaning session: cloned chroot in use
E: Build failure (dpkg-buildpackage died)
+------------------------------------------------------------------------------+
| Summary |
+------------------------------------------------------------------------------+
Build Architecture: amd64
Build Type: full
Build-Space: 5024
Build-Time: 3
Distribution: unstable
Fail-Stage: build
Host Architecture: amd64
Install-Time: 60
Job: /tmp/tmp.4lRJJDjksC/criterion_2.4.0-rc-18-g1cc3911-1.dsc
Machine Architecture: amd64
Package: criterion
Package-Time: 73
Source-Version: 2.4.0-rc-18-g1cc3911-1
Space: 5024
Status: attempted
Version: 2.4.0-rc-18-g1cc3911-1
--------------------------------------------------------------------------------
Finished at 2022-04-05T14:07:50Z
Build needed 00:01:13, 5024k disk space
--- End Message ---
